Juice Consumption

The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...

 

So....been vaping for 6 years.

For the last couple years I was using a Reo with an RBA at .5 ohms and was going through about 12-15ml a day. A friend of mine let me try his sub ohm tank a few weeks ago and I was hooked! The flavor was better than my Reo/RBA setup and the vapor was OMG.

Anyways, I've since bought a couple of sub ohm tanks with an IPV2 Mini, then graduated to a Goliath RTA with an SX Mini M Class. Using the Goliath with a .44 ohm dual coil at 30 watts on the SXM and I'm going through anywhere from 25-35ml a day! This just seem excessive....

Can anyone recommend an RTA that would use less juice but still give me a lot of airflow and flavor? I'm not all about the vapor, although I do enjoy it.

I'm guessing that if you want lots of airflow (I'm a direct lung inhale kinda guy) and a warm, full vape you pretty much have to vape at higher wattages/lower ohms and therefore use excessive amounts of juice...just wondering if anyone else has had a similar experience and has successfully cut down their juice consumption.

FYI, I DIY my juice so cost is not really an issue...I'm a bit concerned that using this much juice every day just can't be good for you.  

Hi I've been in the vaping industry for years now and have had many tanks over the years both mesh and normal coil, for me mesh was amazing at flavour and for more cooler vape lovers, however I found that normal coils provided more cloud and less juice consumption with some tanks and were able to achieve the same amount of flavour as mesh with the right build. But I still curious as too how many people prefer mesh over normal coils and vice versa and why ?  

I recently upgraded to get a larger tank and dual 18650 mod to satisfy my desire to change batteries less often and refill less often. Very happy with my upgrade. However, be careful as I am currently using a dual coil that came with the tank and of course like it (too much?) but requires more power and more juice usage. The message I want to pass on is I use 6 nic and have got a bit of nicotine overdose a few times... something you should be aware of imo. Will be switching back to single coil when this one is kaput... which I'm sure will require getting satisfied with it again and self discipline to stick with the change back. Hope this is beneficial to some of you.  

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

I’m a long time vaper. I have been vaping 83/27 PG/VG juice with 12-16 mg nic. I use an avacado tank with dual Clapton coils at .3 ohms and around 50-60 watts. With this config I can get my most desirable lung hit but only with certain juices and I tend to chain vape. Whenever the shop is out of my regular juice I’m always Leary picking something new because a lot of times even at the same nic level I don’t get the satisfying lung hit I crave and end up with a sore throat from hitting it so often. Soo... I moved to Hawaii and my system is all screwed up. The juices here are all 50/50 so super watery, the juice is also double the price, I burn through it twice as fast, the lung hit is barely there, and it pops and crackles really loud which drives my wife nuts and has cuased many arguments about my “stupid crack pipe”. So in an effort to make my wife happier, spend less money, and maybe vape less I decided to venture into the salts realm.

I started with a geek bar to test the waters and lung hit was phenomenal! But at $20 a pop and only lasting a day that just wasn’t going to work. So after much research I just picked up a SMOK NORD 2 and some 48mg juice. I set it for 50 watts and took my first drag. Good god almighty! One hit and I caught a buzz. I have NEVER caught a buzz from a vape before. After some messing around I dialed it down to 25 watts and so far seems like the sweet spot and I don’t have the urge to chain vape... so success? I don’t know yet? It’s for sure a lot quieter and 1/4 the size of my tank MOD. Does going from chain vaping 16mg to 48 salt nic seem excessive or about right? I may try the 24mg juice when this one is out but any other suggestions? I’m a little worried I’m going to give myself nic poisoning after that first drag lol  

Imagine your self filling an RTA with fresh juice, only to have the worst vape you can endure as you cough up a lung. No its not a dry hit. Do you blame the juice or a clogged up coil? In this episode, I will take a short journey and explore to a better vape.


After a week of chain vaping, over 50ml of juice, a mix of 3mg and 6mg Nic, the rayon wick has finally given up and no longer produced a clean vape. After visual inspection, the coil and the wick has indeed had a significant build up from juice. To the point that I could no longer see wick material between a spaced coil.

After discarding old wicking material and cleaning the coil, i wicked an RTA with fresh Rayon and filled it with juice. My favorite tobacco juice has come a live, i can now take long and deep direct lung hits with enjoyment. My taste buds are intoxicated, as my lungs fill up with smooth and silky vapor with every inhale.


Keep an eye on your coil by visually inspecting it on daily basis. Trust your body and your taste buds when a juice no longer tastes as it should. Re-wicking your RTA/RDA on regular basis or every few days, will help you eliminate many concerns and issues that you might be having with juice flavor or vaping experience.

It only takes ten minutes to rewick, and in return you will continue to enjoy many hours and days of pleasurable vaping experience.


Good Night.  

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

I can only get about a 1-2 day life span out of coils that are organic cotton based. After 1-2 days, they start seeping a dark colored liquid into my tank and ruining the juice. This has happened in my Atlantis tank running Melo coils vaping at 32 watts and my Herakles tank running 55 watts. Keep in mind I vape about 7-10ml a day. Juices are 70VG/30PG or 80VG/20PG all at 3mg nic.

On the flip side, if I vape old school Atlantis coils at 32 watts on the same juices, I get a full week before this happens.

Any ideas on how to make cotton coils last longer?! For this reason, I can't wait to get my Lemo 2 in. I'll be able to rewick daily and not worry about cost.

The way things are going, I am losing so much money on coils it's nuts. See picture to see whats happening.

Oh yeah, this is happening on all kinds of juices I vape. Mt Baker Vapor, Vista Vapors, 4 Pillars, The Milk Man. Some are budget juices - others are premium. No matter what juice I use, it happens.

The BIGGEST killer is Zeus Juice with 80%PG, 20%VG. This juice kills a coil in one tank full. I'm guessing the sweeteners in that juice do it.

It's frustrating because I LOVE my Herakles tank running at 55W but if I have to replace the coil every 1-2 days, that's SO expensive.  

Okay, so I Vape in very “precise” ways but I cannot figure out how to calculate (do the proper math) on how much I nicotine I am consuming. Can someone help? I have been vaping the exact same way daily for a long time, but still don’t know how much nicotine I get (just an estimate) per session because I suck at math...

Details:
1.) I vape 3mg (3mg of nicotine, per ml of juice) of nicotine using a “Smok Nfix” that holds a 3ml pod of nicotine juice. So that’s 9mg of nicotine, per pod.

2.) I set the wattage to exactly 22W on the vape, always, and it is a MTL pod device.

3.) I take EXACTLY 5 puffs over a period of 5-10 mins. Every puff is EXACTLY 5 seconds. Sometimes only 4 seconds, but just say 5 to make it easier. I use my watch or phone’s timer to make certain the timing is exact. I inhale the same way every time. So 5 puffs X 5 seconds, per puff, equals 25 seconds total for each vape session. After those 5 puffs, I don’t vape again (at all) for 1-3 hours, just depending.

....But how do I figure out how much nicotine I am getting in those 5 puffs? I know that in my Nfix pod there is 9mg of nicotine, in each pod.

I also believe 1 full pod (3ML) gives approximately 325 seconds worth of puffs, with each puff being only 1 SECOND. I only tested this one time so I am not certain, but it’s an estimate.

Can anyone help me do the right math here?
I also still smoke ultra light Marlboro cigarettes (from what I read on multiple sources you only absorb about 0.5mg to 0.7mg of nicotine per cig on the ultra lights) but only 1-3 cigarettes per day.
But I am wondering if my 5 puffs on the vape (5 puffs @ 5 second each) is even remotely close to being equal to an ultra light cigarette that has about 0.5mg nicotine per cig?
Thanks, I suck at math so if anyone can help lol