18650 Battery Drain

So I just bought a kit, it doesn't come with batteries -- which I wasn't told (was led to believe it was charged through the USB port according to vape store employee). So I ordered x4 Nitecore-NL1834 18650 3400mAh 3.7 Protected Lithium Ion (Li-ion) batteries and now the door won't close. I read an old article saying that Protected 18650 can be bigger. If there's a possibility of buying batteries that cost $18 a pop shouldn't they let you know there's a chance that it won't be the right size?
Is there a trick to getting the battery lid to close or do I need to now buy unprotected 18650 batteries and hopefully get my money back on the protected batteries I bought?  

So I have (2) 3100mAh Efest batteries rated @ 20A and (1) 2500mAh Efest batterie rated @ 35A. I'm experiencing a pretty annoying problem with all 3 of them and that is they aren't lasting nearly as long as I feel they should be. I can EASILY vape through a battery in less than one hour while heavy vaping. I'm aware that I am sub-ohming and that requires more power from the battery but these are just going way too fast and something isn't right. I have a BEC Pro mod that takes a single 18650 battery and I'm vaping an Aspire Atlantis tank @ 35 watts with the .5 ohm coil installed. I charge each battery fully with a Nitecore i2 before using them and it'll say 4.2V on my mod & on my Smart BEC app it will say 100% as I take my first few puffs but then starts draining at a ridiculous rate until they are dead. I am not aware what the mod efficiency is on my BEC Pro or if there might be something not working properly within my device. Can someone please help me find what's wrong with these? Maybe some of you have eperienced this problem with Efest batteries in the past? Thanks in advance!

Edit: These are genuine Efest batteries as I bought them straight from the manufacture on Ebay.  

So I'm in the market for some high drain 18650 batteries and I was about to go with the Samsung 25R but then I stumbled apon the AWT IMR18650 2600mAh battery. I'm see in some places that this battery have a maximum continuous discharge of 35A and a max discharge of 40. Is this really true? Because I'm also seeing in some other places that it has a maximum continuous discharge of 20A and maximum discharge of 40A (which seems to be a bit more believable to me). If anyone has a link to some testing done on these it would be greatly appreciated. Thanks!

Here's a link to FastTech's listing where I originally found out of this battery: https://www.fasttech.com/products/2287804

And a Ebay listing saying it has a Max. Continuous of 35A: 2 PC AWT IMR 18650 Li MN Battery High Drain Rechargeable 3 7V 2600mAh 40A Yel | eBay  

I have a pair of new batteries that are green 18650's that say "Danger: Do not use outside of battery pack." The numbers are very faint but appear to be SE US 1865 UTC6 C6/ G 0964 8812K05P 144. I don't remember when I bought these or where from, but I buy only at reputable batteries sites. Any help would be appreciated. I am afraid to use them.  

Hi everyone,
Hope your all having a great weekend! Hopefully someone can help me figure out any good canadian or American reputable vendors for 18650 batteries for my arrow sense mod. Out of all the vendors listed in the battery thread, only one had the batteries I wanted, but it was in the US and would cost over $50 for shipping. Hoping to find shipping for $20-30 canadian instead. I am particularly interested in the batteries on the forums listed as tested by mooch in a stickier post. Or Sony battery with 2500 mah , I like to vape with two 18650 batteries at 60-80 watts.  

Hi
I'm usually vaping at just 14 watt (mouth to lung, nothing heavy).

Now I'm soon getting a new mod that takes 21700 batteries, so I'm searching for the best batteries without spending too much or too little.
(aiming for Samsung, LG or Sony, to be safe)

I see some batteries hold 5000 mah, like the Samsung 50E (cyan).
But it only has about 10 amp discharge rate.
So less than half than "regular" 4000 mah batteries for example.

Is 10 amp more than enough for vaping at just 14 watts, or should I find a more "high-drain" battery?
I want to be safe and avoid risks or heat.  

I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.

When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?  

Hi, so I have several different brands of 18650 batteries but I'm getting ready to pick up the new Geekvape Aegis X, I wanted to get some new batteries. I have been reading up on it but I'm so confused, I don't vape very high wattage It's always under 50 watt, 45 usually being the most, so what would be the best batteries for long activity? Any input would really help. Thanks  

Hi folks,

I recently purchases a Sigelei 100w box, and got the purple Efest batteries that the vendor recommended.
I'm using this with a KangerTech Subtank Mini.
It's currently set to 42W - 5.0V, and the resistance it shows me is 0.6 ohms.

I have some questions about my setup.

- I read some reports that these batteries have different specs than what is reported, and it could potentially be dangerous. What should I do to be safe? Is there a max W/V that I can set it to?
- I have a TrustFire TR-001 charger (output: 4.2V / 500Ma). Can I charge those batteries with that? I read the charger supports 18650 batteries, but I'd rather be sure...
- If the charger is no good, any recommendations of what I should be using?

Thanks a lot!  

Hi Guys,

So I originally had a nitecore i8 charger that I used to charge 8 x 18650 batteries. After using it for a few days I started noticing that it made a weird ticking noise and got VERY hot on the bottom. Needless to say this made me quite uncomfortable.

So I exchanged it for a Xtar VC8. So far it’s been amazing. No ticking or weird noises and it doesn’t get hot. It also comes with a nice screen that shows you some details about your batteries. This is what leads me to my question.

I noticed when charging my batteries most of them show as roughly 3.7v but others show as 4.1v. Also the longer they charge the higher the number goes. Is this normal? Sorry I’m a total idiot when it comes to batteries and voltages etc. If anyone could clue me in i would be very great full!

Thanks