Question Regarding Long Term E Juice Storage

Well, I just found 3 liters of 100 mg Throat-Hit Nic from Vapers Tek purchased in 2016. Of course they are still in their original plastic bottles. Uuuuug! The bottles are a not a hard plastic but instead pliable and appear to block light as they are a very dark brown color and on the bottom is stamped PETE 1.
What do you folks think? Keep em or chuck em?
It is a lot of NIC, at least for me... hate to check em, but if you think it's the way to go then so be it.

Thanks  

So I recently purchased a Pulse X 90w. And I've noticed that the squonk bottle is leaking inside the mod itself. And sometimes juice gets pretty close to the positive battery contact. Does anyone know what may be causing this? Whenever I fill the bottle I always fill it up to about 3/4 so that there is displacement for the tube itself. I get it all screwed down and back in then after a while, or my next fill I notice that it's leaked again. This is becoming a rather annoying problem. And I'd rather not chuck a mod that I just bought because of a stupid issue such as this. Any suggestions would be greatly appreciated. Thank you!  

A big thankyou to Jamie at vandykevapes.com

The 50ml glass bottle of dragon punch that I had ordered arrived on Wednesday and disaster the bottle was smashed to bits

Emailed them late on Wednesday afternoon and got an almost instant response, new bottle posted out and was received today (Friday)

This was around the fifth order I have placed with them and the first time anything has been damaged, really impressed with their fast response and excellent customer service

What is their juice like? Well dragon punch my Mrs is absolutely addicted to the stuff and with my latest order tried another of their juices black ninja and yes she loves that one as well!

These guys and there juice are quality, give them a try you won't be disappointed.  

I'm getting leakage from the squonk bottle on my Asmodus Luna. The leak isn't from the bottle itself, but from around the cap and the sealing points. The cap is delrin, and I want to seal it all off at the sealing points, cap to the bottle, around the outside where the feed tube comes out of the top of the cap. I fill thru the 510 so won't be taking it apart once installed again. I'm thinking of aquarium sealer or this: Clear Silicone, Waterproof Sealant, Aquarium Sealant from Loctite Adhesives

Do you think it will hold up to getting nic on it?  

Above all I prize comfort in vaping, which means easy filling, easy disassembling (for coil rebuilding), no leaks even if I leave my tank on its side or upside down for a few days. I do not need clouds and subohming. I My current everyday setup is RG280 or RGM2 – shielded glass tanks (tough to break) with protank coils (easy to rebuild). Not a single leak for half a year. But I’d like something which is a bit bigger than 2.8 ml (as for RG280) and does not need separate coil bases (as for protank).

I have tried couple RBAs. A while ago I have bought on impulse (do not drink and buy) Fogger V4. Found out it needs two coils (too many for me). I have tried to build with single coil (plugging not needed holes with cotton), it was not bad, but it was a bit leaking. With two coils – too cloudy. And its tiny butt hole plugged with Philips screw! Just for refilling I needed a needle-nosed bottle and a screwdriver! Not what I call comfortable. Recently I have bought Erlkönigin clone for $5 – I was ordering other things, it was on sale and I decided to try it, it was practically for free anyway. And I liked it, but not so much that to make it my prime time device. Two drawbacks: still needed needle nosed bottle and rather tough to disassemble (because of its press-fitting o-rings).

So, I am ready to try another RBA and I am asking on advice.

It must have:

- Single coil
- Easy to refill and disassemble

Desirable features:

- Filling with eye-dropper bottle (not with needle-nosed one)
- Ability to change coil without pouring out liquid (desirable, but not required)
- Glass tank (I just do not know when to add juice if I do not see its level)

And what can you say about this one, does it fit description of what I need?
https://www.fasttech.com/products/3028/10009199/2050300  

Just curious how you guys go about vaping through your juice bottles. I buy 30 ml bottles usually. I have a few tanks and dedicate a specific bottle to each tank. I make myself finish off a bottle before I go onto my next juices. If I decide to put a half bottle away and try a new flavor, I'd have a bunch of half bottles laying around and it would annoy the hell out of me.
I have a couple 60 mils on the way though, so I suppose I wouldn't mind stashing those halfway through. I suppose it could be way different for people that drip though.  

Did you guys know that you are supposed to be shaking your bottle of e-liquid? I just read that on my bottle of Loaded Strawberry Jelly Donut.

I have never been doing things and well. I am going to start doing it to see if the flavor gets any better.  

Nicotine storage has been somewhat of a hot topic lately, and as I've been evaluating my storage setup, one of the things I've been wanting to do is to finish topping off some amber bottles that aren't quite full of nicotine and have too much headspace for my liking. My question is: would there be a problem with mixing the same strength nicotine from different vendors? If I have a 8oz. bottle with 7oz. of MFS 100mg nic, can I add another oz. of River Supply or Heartland Vapes 100mg nic to it without causing any kind of weird damage to it or affecting the long term storage quality?  

I'm new to vaping, I started vaping because I'm getting tired of people complaining about the smoking odor after I smoke. And I don't even smoke that much, maybe 6-8 cigs a day.
I started trying out the Stlth about 3 weeks ago and got used to it, so I went to a store to get the refillable stuff. I bought a Caliburn device and the guy in the store recommended a juice from his own store brand.
After I got home I put the juice in the device and tried it but I couldn't feel the throat hit at all, the juice was 3mg, the Stlth I used was 3.5mg which had the perfect hit for me.
I went back to the store and asked if I can exchange for one with a higher Nic. He told me he can't take it back because I opened it, strange that if it's his own brand, couldn't he just refill it and reseal it in another bottle? I only used about 2ml so far.
But anyway, he told me the ejuice has smoother draw that's why there's no throat hit as NIC salt, I did some more research and found that it's the opposite of what I've read, everything I read are saying that ejuice has more throat hit than Nic salt.
Sorry for the long store, the bottle he sold me was 60ml ($30) which is a big waste to throw away. Is there anyway I can salvage this bottle by mixing it with something else to give me that little bit of a throat hit when I draw?  

I've already done it, but was just making sure it was ok. I tend to mix down my liquids quite a bit, adding VG into an 18mg base to end up with a 6mg blend with light taste. I do that for my All day vaping, so I don't overpower my taste buds. The problem is, the last two colors I got were colorless, so it was hard to tell which bottle I picked up or was in which tank.

So, I came up with the idea... put one drop of food coloring in one bottle (30ml). I chose blue. I filled 1/3rd with my juice choice, filled the rest of the bottle with VG, and added one drop of blue food coloring. One drop went a long way and turned it quite blue.

Besides coloring the cotton, is there any adverse affects of doing this? I don't think one drop of food coloring over a half a weeks time to vape the bottle is enough to worry, but I just wanted to run across this to you guys. I know it will discolor the cotton, but I rewick it myself anyways. I color it for identification, so there is a reason to do it, and It seems it's easier to tell the liquid level as well. It doesn't color the vape or my mouth, but the only thing I'd be afraid of, is if ejuice leaked, it would dye whatever it got on.

Any input?