Desktop Heater - Winter Vaping

Hi all

I started vaping again after many years like a month ago. My set up atm is Aegis Solo (came with cerberus tank which leaked madly), currently using Aspire Tigon tank and I have an Innokin Zenith Pro which I haven't try yet.

Is taking me a while to figure out what kind of vaper I am, still not 100% sure tho, I know I prefer DL over MTL but not at high wattages because I believe the vapour becomes to warm for me. I like the Tigon tank but is a little to restricted for my liking, I will like more airflow.

Questions:

1 - Is DL at higher wattage always a warm/hot vapour?
2 - What suggestion for a more loose DL tank with vapour not to warm.
3 - Worst case scenario if the cerberus won't stop leaking (I do like the options of several coil compatibility) would the Zeus top airflow be a good option or others?

Any help will be greatly appreciated.  

Winter in Auld Scotia - the weather is dreich and cold, the days are short, the nights are long, Spring is a long way away … and for some reason I always find myself at this time of the year back with a preference for older technology and simpler things such as my Telecaster Guitar ( Leo Fender’s first design back in 1950 and still going strong ) my quartz Rotary watch ( from the 1980s ) and a mech mod with the same tank every day.


Is it just me, is it me age guv or does anyone else find anything similar?


Whatever - happy vaping!  

Hello everyone. I've been vaping for almost half an year now and I've been absolutely loving it. I started with an aspire starter kit, then went to an aegis legend kit with a sub-ohm tank and now I've got 3 different RTAs (Zeus X,Profile RTA and Aromamizer Lite). As you can see I'm quite hooked on vaping / building in general. Over the past few months I've avoided making topics with stupid questions in them and have basically read and watched all the informative vids out there. As far as mainstream products go there is abundance of information and it's pretty easy for anyone to find their way.

Now to the issue at hand: While watching a review I came across a high end tube mod ( Dani 25 ) and I realized there is a whole `nother level to this ballgame. I want to get into high end attis and mods made in the west but it's hard to find even a list of high end brands let alone reviews on all of those. Basically my question to you is : If I have money burning in my pocket and I want to buy something cool how do I know what's good and what's basically a ripoff?

While I'm fine taking the risk of buying a defective/not very good 30$ tank, it would be an absolute disaster if I were to buy something 10 times that price that's garbage.

Do you guys know any sources that review high-end stuff exclusively and any specific brands I can look at?  

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

Hello all,
I’m sure this has been discussed before as this is not a new tank, but after doing a search I didn’t find an answer. I also didn’t find much help on YouTube. I just pulled out my 2k18 doggystyle (I think that’s the correct version, it is a top fill) and built and wicked it. It has been so long since I bought this and read up on it, I don’t remember any of the tips and tricks.
As soon as I adjusted the airflow, ejuice started leaking in large amounts out of the holes. Luckily I was able to salvage most of the juice as it was premium juice I just bought from a store (not diy). What did I do wrong? Is it a wicking issue or is something else wrong? Any suggestions are greatly appreciated! Sorry if this has been covered before, but didn’t know where else to ask and I want to get this tank to work.  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

Hey guys whats up. Well I had gotten the Sub Mini tank, the first tank I got was a dud. I had nothing but issues with it since day one. Coils went bad in 1.5 days both coils, then the rba deck was giving my sigeili issues and errors.

So I sent it back, They replaced it, and I now have Version 2 as they say. This tank has 2 air slots and different Holes in the tank. I used the Stock .5 coil but was just getting wayyyy too many dry hits.. So I went to the RBA deck, been using the coil that came with it, and I have 100% organic cotton. So I been using that, but now I am getting Dry hits with this thing!!! every 4th hit Is Dry!! I have to cover the holes and pull to get teh cotton wet again, and then 4th hit shes dry again.

What is going on here? Anyone else have issues like this? I am really getting fed up with this and ready to just throw it away. What can I do about the situation or why is this happening?

E-juice = 80/20 Clear Liquid all fruity flavors 3MG  

I'm a bit lazy with my re-wicking. Especially RTAs. Usually leave it until it's a bit past due.

I'd be interested to know how many of you have a timetable for changing wicks or do you just base it on flavour or maybe the number of refills of the tank or squonk bottle?

Do you do it in batches of attys or one at a time when needed?  

Hey all, sorry if this is posted in the wrong place but I was wondering if anyone has tried a 24g coil build in the subtank mini rba deck and if it worked or not? Regardless I'm going to build a coil a little later to try and see how it works but I thought I would ask before hand on the odd case someone has tried, I've searched a bit and couldn't find anything, everyone seems to like twisted coils in these. The main reason I'm interested in doing this is because I've never vaped a successful tank with no burnt/dry hits yet so I figure the 24g ramp up time might help settle this problem, at least for me. I'm interested to see the thoughts so please reply  

I can't be the only newish vaper in these parts.

Temperatures are warming up. Cars are getting hotter. Maybe some of us are cheap on our air conditioning and wear less and sweat more during the summer.

I started vaping in the winter. Who has warm weather tips for the newbies?!?!?!