I recently upgraded to get a larger tank and dual 18650 mod to satisfy my desire to change batteries less often and refill less often. Very happy with my upgrade. However, be careful as I am currently using a dual coil that came with the tank and of course like it (too much?) but requires more power and more juice usage. The message I want to pass on is I use 6 nic and have got a bit of nicotine overdose a few times... something you should be aware of imo. Will be switching back to single coil when this one is kaput... which I'm sure will require getting satisfied with it again and self discipline to stick with the change back. Hope this is beneficial to some of you.
I am vaping very airy mtl but lately a lot restricted direct lung on a hellvape md with a small Clapton coil 30/40 7wraps or something ...at 23watts and with a full tank 4ml I get like 100puffs if I do direct lung like 3-4 seconds each puff...
Ok I know depends the time of Puffs and how much someone vapes and all that but I was wondering....
I was thinking to buy a zeus x rta and get also the mesh deck to have both...
The thing is I wonder since my hellvape eats Soo fast the juice ....
How will zeus with dual coil be...or the mesh with 4ml tank???
Anyone using it and how many times u refill per day hahaha must be a lot isn't it??
Maybe I should buy another rta with larger capacity??? XD
So I was wondering if there is any correlation between throat hit and temperature. I noticed that I feel a larger throat hit or end up having a sore throat when I use my tank throughout the day, but I don't when I just use my RBA and the same juice. So does a cooler vape lead to a stronger throat hit?
For reference, the tank (Lemo V1) is built somewhere between 0.4 - 0.6ohms (24g single coil) and the RBA (Doge Clone) is around 0.2ohms (24g dual coil). All coils are 2mm inner diameter and cotton wicked, but as would be expected, airflow is significantly larger on the RBA, but the vapor temperature feels to be warmer.
So I have (2) 3100mAh Efest batteries rated @ 20A and (1) 2500mAh Efest batterie rated @ 35A. I'm experiencing a pretty annoying problem with all 3 of them and that is they aren't lasting nearly as long as I feel they should be. I can EASILY vape through a battery in less than one hour while heavy vaping. I'm aware that I am sub-ohming and that requires more power from the battery but these are just going way too fast and something isn't right. I have a BEC Pro mod that takes a single 18650 battery and I'm vaping an Aspire Atlantis tank @ 35 watts with the .5 ohm coil installed. I charge each battery fully with a Nitecore i2 before using them and it'll say 4.2V on my mod & on my Smart BEC app it will say 100% as I take my first few puffs but then starts draining at a ridiculous rate until they are dead. I am not aware what the mod efficiency is on my BEC Pro or if there might be something not working properly within my device. Can someone please help me find what's wrong with these? Maybe some of you have eperienced this problem with Efest batteries in the past? Thanks in advance!
Edit: These are genuine Efest batteries as I bought them straight from the manufacture on Ebay.
I’ve been away from vaping for about 7 yrs. I don’t have any of my old equipment, which now I miss very much. I’ve been trying to get back to vaping for health reasons, and having to learn all over again. Everything is dual coil. I NEVER used dual coil, but I’m trying to learn. I got a Vaporesso PM40, a Drag S a hcigar vt inbox and a POS squonker that I’m using for a dripper (reviews said they leak and short out causing me to fire by their self. I joy cappo squonk box).
Do I figure dual coil watts and amps like I did my single coil builds. I never got into the low sub-ohm thing. Maybe 0.9-1 ohm.
It’s good to be back in ECF again.
Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.
Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?
I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!
1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!
Thanks in advance for taking the time to reply to this post and your patience!
Cheers!
Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?
Still use clearomizers?
It has been nearly two years and I have yet to get away from my single coil T3s/Mt3s or Protanks and the like.. Cheap, premade 50pk of coils are $2 and change and they're just plain simple, like me.
I also use egos for out and about/work and leave the bigger vv/vw devices at home.
Am I the only one that doesn't carry around a dual 18650 100w mod with a rda and 30ml bottle of juice everywhere I go?
Hey all -- I'm a tech and do a lot of driving. I usually use a rugged mod and a Steamcrave plus tank with a 15ml bubble glass on long trips so I can get where I am going without having to change batteries or refill the tank.
I was passing through a mountainous area with some very steep inclines and declines and my tank leaked all over the place. It has happened more than once.
I never really thought about it but I guess changes like that affect it. I'm a tech not a scientist so I guess there is some theory behind it?
I was borrowing my bro's Atlantis, for awhile. I put a new coil in it, a couple days before I returned it. It was hitting great. When I give it back, we dump the juice back in a bottle and put the tank back in its original box. About a week later, he sells it to my brother in law. Here's the weird part - we fill up the tank, assuming the coil needs no priming, and fire it up. It seems to be weak on vapor production. It has the nice crackle/pop, and there is no burnt taste or dry hits, but it just isn't producing the volume it used to.
Is this because it sat for a week?
Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?
primary goal: outstanding flavor
No leaking
Lots of air holes around the coil
thanks for your time
Hey guys,
I'm looking for a tank and battery combo that subohm at . 5 but the tank has absolutely no juice spit back. I do know my atlantis and atlantis v2 have tiny droplets of juice that hit the tounge. So small that I don't notice it until I had someone point it out to me. I run 70pg, 30vg juice.
I'm looking for a setup for a friend with a tank that is small like the atlantis v1 or subtank mini with a small frame mod.
They currently have a I stick 30 so ideally I'd like a tank that works with that.
I will say thru personal testing the atlantis v2 will give me absolutely no spit back at 50 watts, but the I stick 30 cannot get to 50 watts.
If a new mod is needed, they will go with the new Kanger 50 box but my big concern is spit back. I'm talking I need a tank that has no spit back.
I'm looking at doing this in the smallest package I can. Ml capacity isn't a issue. Size and weight is the issue here too.
Rba tanks are out of question. Need something with replacement wicks.
Any ideas?
Sent from my LGMS395 using Tapatalk