Hey - vaped for a LONG time. Mostly MTL tanks and I have been using the Zenith for a couple of years which I really like, but I'm too hard on it. I vape too much. Anyway, I've started using thicker liquids 70/30 and it's even more difficult for my Zenith. I do thin it out with a little menthol drops. But here's my question. I've been pondering going to a sub ohm tank but I just really don't know which to choose. As it stands, I'm thinking the falcon 2? Do their coils last long? Do the tanks leak even if liquid is thinned out a bit (not much). Anyway, if anyone has any recommendations, plz post reply. Thanks
Hey y'all I'm wanting to try out a Zenith mtl tank to replace my egoOne v2 since I can no longer get the CLR coils and am not willing to rebuild them.
I mainly want recommendations on which online stores are the best to purchase the tank/coils from. I've been out of the loop for a few years and the store I always purchased my CLRs from doesn't carry the Zenith.
Also wondering if anyone knows if the pmta is gonna have any impact on the availability of the Zenith tanks or coils in the near future? I'd hate to try it and like it and purchase more just to find out they're extinct. I appreciate any help.
So my husband and I bought two zenith II tanks and inokin 1.6 ohm heads. My husband has not been impressed with the lack of flavor that it produces. Mine has been ok but I’m wondering if I need to clean the coil often? I usually use a nautilus tank and coil that I would clean each time I added liquid. Any help is appreciated as we bought 13 packs of these coils
Hey guys looking for a tank that will last me long. As we all know CE4's aren't the best mine died pretty quickly. Looking for a tank that will last me long, and wouldn't need replacement coils very often. Also hoping these tanks are glass so they don't break with certain juice. I was thinking the evod glass 2 or the aspire k1. Any ideas? And will these tanks fit on my battery?
Zen Pen Electronic Cigarette Kit
I've been using disposable clearomizers since I started vaping, with an 808 kit, and that's been working fine for me, but I came across a super cheap deal recently for a Kanger Evod starter kit, so I bought one. I paid about $14, so it was a no brainer.
The tanks have these disposable coils, but the tanks seem like that they can be re-used forever, as long as they don't crack or fall on the ground and break, is that correct?
I saw that they sell a glass tank for it also, so I think that I'm going to pick one of those up, and I'll be able to vape on any juice that I please, without the fear of the tank cracking, and I'm assuming that that tank will last for a very long time.
So far I'm pretty happy with the Kanger Evod, and I like the vape from it.
Haven't vaped in like 8 years? So most of everything is new to me now..
But I did a little reading and I figured out a few things I need in a vape, but really there is so much, it's kinda hard to know what is good and what is not for brands and styles, so I'm hoping I can get some help by experienced vapers here.
I'm looking to quit smoking and here's what I'm looking for in a vape setup.
MTL Mouth to Lung setup so I can draw in and then inhale like a cigarette, but I would like a decent cloud. Not looking for huge, just good and maybe be able to slightly adjust what gets produced with using only 50/50 juice blends.
RTA setup? I need a rebuildable coil tank system.
I need to keep my maintenance cost low, so I need to be able to rebuild new coils.
No leak tank is a must. Needs to lay down on side on table and keep in pocket.
1 battery or 2. Doesn't matter much.
Would like a smaller mouthpiece compared to the larger style so I can get a good MTL draw.
Not sure what my options are for tanks and box mods or pen style? I think I need some kind of box mod? So i can slightly fine tune watts, volts to my coils if it just doesn't feel right and needs minor adjustments? Also like the option showing how many seconds used or draws.
There's so many tanks out there, but it's hard to tell what is really good.
The battery side, I really have no idea what I would need... watts, ohms, voltage.. with all the combinations, I can figure out what I really need..
Not looking to just be easy simple. I want good quality and I can only buy once.. I can't really afford it as it is, but I need to stop smoking..
But I want to buy once and be good for long time and not wish I bought something else. I just don't have the money to play around like that..
So I hope I can get some help here or suggestions to get me looking in the right direction for tank and battery side system.
Quality brands?
Brands to pass on because there is better options?
Okay, so my partner and I have used the same Aspire Triton2 tanks for about 5 years now. They were never leak proof, but lately this problem has been getting worse and I am trying to see if the market has something better to offer. Other than the leaking problems, the Triton2 has been great. Here are some desired features that I hope to find in selecting a new rig: holds at least 3ml, long lasting coils that are affordable (around $3 ea), replaceable O rings would be nice, manufacturer that is not a fly-by-night, and hopefully leak-proof. Also I should note that I currently use 0.3ohm coils @ 38w and really have no need for very high wattage vapes.
If anyone knows of some tanks that fit the description above, I would be grateful for any suggestions on what to shop for.
Thank you and have a great Thanksgiving weekend!
~Starfield~
I know I'm probably 5 years behind here but i've just recently started to use cartos with tanks and I'm really digging the vape I get out of them. I'm normslly a tank user(Kangers mostly). I got some Boge cartos and a couple of their F-16 tanks. There's something really satisfying about the way they hit. Anyone else still using this ancient technology?
74 days without a cigarette so I’m still new to this whole vaping thing.
Started with Juul, got tired of refilling pods very quickly.
Switched to a Smok Nord. Have grown tired of the hit/miss with cools.
Just got my Zenith tank. Went ahead and got the Kroma/Zenith kit and it’s my first non-pod setup.
Like it so far. Only issue so far is there seems to be a lot of juice coming through when I take a hit. When I take a drag but put a thin white piece of cloth over the tip there is a very noticeable amount of brown stain on the cloth. Had the same issue when I got my Smok Nord but I corrected by switching from 50/50 nic salts to a 70v/30p freebase.
Currently Using the same 70vg/30pg 6mg Halo Tribeca.
Using the 1.6ohm coil;
Started at 14 watts;
Dropped to 11 watts and it reduced the juice but also the temp of the vape.
Adjusting the airflow doesn’t really make a difference.
Anyone else having the same issue with the amount of juice coming into their mouth? Is this normal with this type of setup? Did I flood the coil or something? I primed it with 5 drops then let it sit for about 10-15 minutes before taking the first hit.
Will probably limit it use at the house because I don’t want to carry around so much weight in my pocket.
GS Air coils/GS 3ml tanks.
I Googlefied this and Did see One place that said A worn out tank could make coils not last as long. (Sounds near fetched to me...)
Can an old tank start Causing premade coils to show Low ohms, like. 05 ohm?
I am pretty sure these are factory coils not FT copycats.
Bruce in Ocala, Fl
Think i might of burnt out a Alantis coil yesterday, still not sure. I stuck my tank in cup of hot water for 20 mins with 1 or 2 drops of washing up liquid. Then i dried burn the coil.
When assembling my tank and topping up with new juice i got a horrible burnt taste so i just swapped it out and put a new coil in. At the moment i only got 1 sub ohm tank and i i got a selection of juices. I do intend to get another sub set up waiting on ZNA 50 as i type this. But this going to take time as i went for the cheapest option ie Fast Tech.
Does anyone know how long the coils for Alantis tanks are suppose to last ? and the best way to keep them clean when swapping out juices ?
Any advice would be really helpful.