Zenith Coils

Hey y'all I'm wanting to try out a Zenith mtl tank to replace my egoOne v2 since I can no longer get the CLR coils and am not willing to rebuild them.

I mainly want recommendations on which online stores are the best to purchase the tank/coils from. I've been out of the loop for a few years and the store I always purchased my CLRs from doesn't carry the Zenith.

Also wondering if anyone knows if the pmta is gonna have any impact on the availability of the Zenith tanks or coils in the near future? I'd hate to try it and like it and purchase more just to find out they're extinct. I appreciate any help.  

So my husband and I bought two zenith II tanks and inokin 1.6 ohm heads. My husband has not been impressed with the lack of flavor that it produces. Mine has been ok but I’m wondering if I need to clean the coil often? I usually use a nautilus tank and coil that I would clean each time I added liquid. Any help is appreciated as we bought 13 packs of these coils  

The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...

 

Hey - vaped for a LONG time. Mostly MTL tanks and I have been using the Zenith for a couple of years which I really like, but I'm too hard on it. I vape too much. Anyway, I've started using thicker liquids 70/30 and it's even more difficult for my Zenith. I do thin it out with a little menthol drops. But here's my question. I've been pondering going to a sub ohm tank but I just really don't know which to choose. As it stands, I'm thinking the falcon 2? Do their coils last long? Do the tanks leak even if liquid is thinned out a bit (not much). Anyway, if anyone has any recommendations, plz post reply. Thanks  

I have a ijoy zenith I just got it two weeks ago and it is not charging and it is just getting extremely hot when I plug it in what do I do  

Hey. I have a very annoying dry hit problem with my Innokin Zenith tank. I can't figure out what makes it happen. It happened on an used coil, so then i changed coils, but it happened again on the new coil.

I have 30% PG 70% VG liquid, didn't chain vape too much, had it on 14 watts, the tank was full, i had primed the coil...

Help is very appreciated!  

74 days without a cigarette so I’m still new to this whole vaping thing.

Started with Juul, got tired of refilling pods very quickly.

Switched to a Smok Nord. Have grown tired of the hit/miss with cools.

Just got my Zenith tank. Went ahead and got the Kroma/Zenith kit and it’s my first non-pod setup.

Like it so far. Only issue so far is there seems to be a lot of juice coming through when I take a hit. When I take a drag but put a thin white piece of cloth over the tip there is a very noticeable amount of brown stain on the cloth. Had the same issue when I got my Smok Nord but I corrected by switching from 50/50 nic salts to a 70v/30p freebase.

Currently Using the same 70vg/30pg 6mg Halo Tribeca.

Using the 1.6ohm coil;
Started at 14 watts;
Dropped to 11 watts and it reduced the juice but also the temp of the vape.
Adjusting the airflow doesn’t really make a difference.

Anyone else having the same issue with the amount of juice coming into their mouth? Is this normal with this type of setup? Did I flood the coil or something? I primed it with 5 drops then let it sit for about 10-15 minutes before taking the first hit.

Will probably limit it use at the house because I don’t want to carry around so much weight in my pocket.  

I recently got a VOOPOO mini. Came with a small low wattage coil installed already. Used that one and got great flavor. Just went thru 2 N1 coils. Terrible burn and horrible flavor. I let both coils prime for over 15 minutes and set at low wattage to begin with. I am very unhappy with these coils so far.  

Ok so I know that kanger subtank .5 ohm coils are good for up to like fifty watts and the subtank 1.2 coils are good for up to 26 watts, my question is this kanger has released vocc coils pretty much the same coils they have for the aero tank , genitank ,etc except now they have organic cotton like the subtank coils. Is it safe to think that the 1,2 and 1.5 ohm vocc coils will be safe as the 1.2 and 1.5 subtank coils at the 26 or so watt range, if not how many watts are safe so I don't burn them to hell  

Does old coils have any negative affects?

I typically burn off the gunk on the coils and put it through a good rinse then change my wick every few days. This was especially true when I'm using standard kanthal on the Protank.

I recently switched to a Solomon 3 using claptons. I find that there is very little gunk on the coils, I still burn off what I can before replacing the wick. I usually change the coil every week and one wick in between. On this one however, I'm 2 weeks on on the same coil and had only replace my wick once using the same liquids that I normally use on the Protank.

What I notice is the vape isn't as smooth as if I were to put in a fresh coil. I think I just answered my own question but what do you guys have to say about it?