Uwell Nunchaku Auto Discharging Problem

Hi
I got myself second Caliburn and from the start I feel that auto firing is not as fast as my first one, just like a second or so behind. If I use the button it seems to be OK.

Also, it feels more airy. I check the same pod on both devices and first one seems to have a bit more restrictive airflow. Or, due to late auto firing, I am inhaling first clean air instead of vape, and thus, the feeling of less restrictive airflow.

And lastly, which is not a problem, but it is not feeling OK, second Caliburn pod latching thing feels more loose, where on the first, when I push pod into the slot, I can feel and hear distinctive click, on the second, just a very little bump and very shallow click.

Would first, auto fire delay constitute good grounds for warranty replacement? I got it less than a week ago.

Any thoughts?  

I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?  

I don't really like these little auto-fire devices, but for $1 each I'm willing to try them. Is this for real? I did notice one of the little Smok devices like this has had lots of issues with the auto-fire getting stuck on. Is that why these are on sale? Or is this part of the regs coming... no more auto-fire allowed (actually that's not a bad idea, but I'm still willing to take my chances) I have no backup, and the one I had I dropped while at my son's house. I need something temporary so I can keep my main device at home. I like the Moji... use my own juices (what VG/PG ratio is best? I can Mix my own DIY)  

So when i put my alien 220w to chrage it shows that its discharging the batteries and i have no idea ... to do  

SO every video Ive seen of someone causing a battery to vent it took a few minutes of the battery sizzling and popping and heating up, smoking, etc. So why do people talk about a battery venting like its an imminent threat? As if say you built a 0.1 ohm coil and didnt know it, fired it and it would blow up in your face? I've never seen it happen or heard of that. Not saying it cant, I'm just wondering where the idea that a battery can just instantly combust without notice is coming from.  

It's been eons since I was last here. I've been happily puffing away on my eroll for a while now. Dh, on the other hand, he's having more trouble. The biggest problem is that he says pg is like breathing through a dirty respirator. So, his juice is thick. I've been setting him up with the eroll and adding some vodka to his juice to try to thin it out (I diy our juice). That, however, has been having various problems (he's been smoking again when he doesn't feel like screwing with it). He wants a set up that he doesn't have to fiddle with. I'm looking for something with an auto batt, doesn't cost an arm and a leg for parts, and will put up with 100% vg juice. Any thoughts? I haven't been keeping up on what's new since I've been so happy with the eroll. I currently have him using a 360 mah 510 auto batt with a clearo. Even if that works for him, I can't seem to find them anymore, so another solution must be found. TIA  

Hi Albert I have a few different yihi chips one is an auto squonk and the other is the topside dual carbon I really like the temperature control of both of them and would like to find a single coil DNA to try out because I also like the power curves and everything is well I'm just having a hard time finding a single battery DNA squonk that's under $100. Any help would greatly be appreciated  

i'm using blu plus also i have two battery

but one of two's sensor express dull response.

another one's sensor is rather sensitive so there is no uncomfortable.

but other battery has dull sensor. so i have to imbibe rather strongly.

what's wrong with this?

how can i fix it? or how can i set default setting of sensor?

please give me any advice!!

thank you.  

I was sitting at my desk a minute ago when I heard a sizzling sound. Looked over to find that my Eleaf 50 was auto firing even though it was off!! The only way to shut it down was to quickly remove the atty. Has anyone else come across this problem?  

So I have (2) 3100mAh Efest batteries rated @ 20A and (1) 2500mAh Efest batterie rated @ 35A. I'm experiencing a pretty annoying problem with all 3 of them and that is they aren't lasting nearly as long as I feel they should be. I can EASILY vape through a battery in less than one hour while heavy vaping. I'm aware that I am sub-ohming and that requires more power from the battery but these are just going way too fast and something isn't right. I have a BEC Pro mod that takes a single 18650 battery and I'm vaping an Aspire Atlantis tank @ 35 watts with the .5 ohm coil installed. I charge each battery fully with a Nitecore i2 before using them and it'll say 4.2V on my mod & on my Smart BEC app it will say 100% as I take my first few puffs but then starts draining at a ridiculous rate until they are dead. I am not aware what the mod efficiency is on my BEC Pro or if there might be something not working properly within my device. Can someone please help me find what's wrong with these? Maybe some of you have eperienced this problem with Efest batteries in the past? Thanks in advance!

Edit: These are genuine Efest batteries as I bought them straight from the manufacture on Ebay.