Problems With Hellvape Mtl

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

I have hellvape me RTA and I had some flooding problems and I checked the top fill seal I love the topfill and check it with my mouth and I see that it's not sealing perfectly.... The rubber seal seems to not make perfect contact and I wonder could this cause flooding problems when I leave my vape without using it??? It draw air into the juice chamber??? Also someone here on a thread mention he had 2 hellvapes and when he swap the topfill parts with each other his vape don't leak....should we have perfect seal at the top fill mechanism???  

The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...

 

First off, I would like to say that I’m very new to vaping. I started off with a JUUL, then a Smok Novo 2, and eventually got sick of buying pods.

Now I have a Hellvape MD, and an Ares 2 - the first provides better flavor, but it’s still not comparable to what I was getting in my pod systems. I just recently purchased a BP Mods Pioneer, and I’m hoping that gives me better results. I’m using an Aegis Mini for a mod.

I’m trying to figure out what I’m doing wrong, because it’s really frustrating to spend all this money for worse flavor, when I was hoping it would let me save money.

I have about 40 bottles of salt nic flavors that are 50 or 35 mg, and a couple 3mg freebase I bought (120ml for $7 seemed like a steal). I would really like to get away from the salt nic, but I seem to get even worse flavor from the 3mg.

I’m using 2.5ID 28ga SS316L round wire from Master Wire Supply (I have a spool) with Puffs Organic Cotton. My coils are usually .7ohms, but I’ve tried up to 1ohm. I’ve also tried 1 ohm Vandy Vape Superfine MTL fused claptons, and experienced similar results.

I’m using the MD with the most restrictive airflow settings (3 small hole airflow disk), low (2-3) adjustable AFC setting. I have my coil as low as possible to the airflow, and I have thinned / fluffed my wicks.

I haven’t tried adjusting the airflow below the coil on the Ares 2, because the video instructions say wide open airflow below the coil is the best for flavor (I have found the opposite to be true for the MD).

Can someone provide me more insight?

Will 2mm ID coils with the same amount of wraps taste better than 2.5? Do coil ohms do anything for flavor, or does it only change how fast it heats up? Will I lose flavor if my coils hang outside the diameter of the airflow disk?
Is there a certain type of coil that would give me better flavor than regular round wire?

I use TC at 420F 20 watts


Any kind of feedback is appreciated and if I left anything out or you have questions about my set up that could help me out please ask! I’m at a loss on what to do, and it seems like no amount of research is helping  

I have a problem with the aspire atlantis leaking and its going in the drip tip and i see some of it coming out the air flow holes ived taken apart everything and cleaned and dried it for 2 days and it happened again. I made sure the coil was securely twisted on the bottom piece. Anyone know how to fix this?  

I am vaping very airy mtl but lately a lot restricted direct lung on a hellvape md with a small Clapton coil 30/40 7wraps or something ...at 23watts and with a full tank 4ml I get like 100puffs if I do direct lung like 3-4 seconds each puff...

Ok I know depends the time of Puffs and how much someone vapes and all that but I was wondering....

I was thinking to buy a zeus x rta and get also the mesh deck to have both...
The thing is I wonder since my hellvape eats Soo fast the juice ....
How will zeus with dual coil be...or the mesh with 4ml tank???

Anyone using it and how many times u refill per day hahaha must be a lot isn't it??
Maybe I should buy another rta with larger capacity??? XD  

okay so don't laugh but this is really an amazing vaping experience/setup for me! I have two batteries and a dual 18650 charger, so I never have to charge onboard nor do I find myself with no power since I always have at least one charging. I love the simplicity of the cloupor mini 30w. Between the magnetic battery door, simplistic screen/button setup, and the overall minuscule appearance of it, I think she's beautiful! The arctic tank however, I've had a could problems, but not too bad (Yes, I did allow my atomizer head to soak for a full 24 hours in juice.) Before I get into that tanks problems though, I'd like to also include that I've been getting into dripping aswell. I bought a plume veil clone a while ago for around 30$, and i was dumb enough to think that there was no need for a VV mod over $15... therefore I bought an X6 battery (cringe, I know..) and long story short I had a terrible experience. the wire that came with the rda was iffy, and it also came with silica wick; which I hate. I ended up building some kinda ****ed up maelstrom of a build. I used the cotton ends of ear cleaners, the questionable wire that came with the atty, and I ran it all at a mind melting 4.4v. Best part of it is that I had no way to check how many ohms I was pushin out. Anyways, I digress. First problem with the Arctic sub ohm tank was the "Check atomizer" deal on my cloupor. The problem was that the connector pin for the mini 30w isn't spring loaded, so I had to whip out the mini screw driver and adjust it. Once that was fixed, the atty was working perfectly!! Except, I was getting a little burnt taste. That's when I've learned that with this tank you have to start at a low wattage and work up to 30 when you're starting vaping for that session. The airflow is good, but I hate airflow; so it's even more splendid that the lowest airflow setting is barely any air at all. Really. It feels like sucking through a brick, and I like it. A ton of flavor, I vape eucalyptus mint flavored juice right now, and I'm loving it. I can't even express to you guys how much I'm loving this thing! Thanks for the advice in telling me to get it!  

Can anyone that owns the Hellvape Grimm RBA, if you have a caliper, measure the diameter of the top barrel (in millimeters please)?

I would be grateful if you could do that.

 

I don't know if anyone has issues with their protank 2 but I hear a lot more negative than positive on them. I was messing with one of those bootleg ones and I couldn't figure out why it kept on leaking. Now just yesterday a friend gave me his protank 2 and Im guessing it was because he was tired of it leaking. When I first took it apart I took all the pieces off and connected them all again one by one making sure it was air tight as I added each piece. Everything was air tight until I got to the coil. I was taking a drag off it and it immediately started leaking and I was like why the heck does it do that? I noticed that it was leaking from between the coil and atomizer where the two little airholes are. What I did to fix this was take an old coil and gently pull off the little silicone ring (above where it says the ohms and below the wick) then I dropped it into where the coil meets the atomizer. After I just screwed in my coil and it works perfectly. No leaking whats so ever! Very good cloud production so far I recommend trying this if you have one. Sorry if someone already wrote this but I did a lot of looking around and never found an answer. Also didnt know where to post this so I apologize if this is the wrong section.  

So....been vaping for 6 years.

For the last couple years I was using a Reo with an RBA at .5 ohms and was going through about 12-15ml a day. A friend of mine let me try his sub ohm tank a few weeks ago and I was hooked! The flavor was better than my Reo/RBA setup and the vapor was OMG.

Anyways, I've since bought a couple of sub ohm tanks with an IPV2 Mini, then graduated to a Goliath RTA with an SX Mini M Class. Using the Goliath with a .44 ohm dual coil at 30 watts on the SXM and I'm going through anywhere from 25-35ml a day! This just seem excessive....

Can anyone recommend an RTA that would use less juice but still give me a lot of airflow and flavor? I'm not all about the vapor, although I do enjoy it.

I'm guessing that if you want lots of airflow (I'm a direct lung inhale kinda guy) and a warm, full vape you pretty much have to vape at higher wattages/lower ohms and therefore use excessive amounts of juice...just wondering if anyone else has had a similar experience and has successfully cut down their juice consumption.

FYI, I DIY my juice so cost is not really an issue...I'm a bit concerned that using this much juice every day just can't be good for you.