I’m So Happy

that might not sound big news to you guys but when you live in Thailand it sure is . It’s a secret underground vape shop in khon kaen city where I live , I’ve tried to find it on my own and failed so this time I took my wife so she could understand the info better, anyway eventually we found it , no shop signs just a door amid streets and alleyways in a part of the city we didn’t know existed. But worth it ,what I want to do is gradually stop having hardware shipped from uk and become self reliant, if he could speak English it would be better but my Thais not bad and it seems in vaping some words are international , like overload lol  

I busted my tank and my local store didn’t have another so I just decided to buy a whole new head/tank to go on my SMOK morph 219 mod. I asked the store clerk several times before I made the purchase if the tank I’m buying is compatible with my mod. He insisted it would work. Well now when I get it home and try to use my new tank on my mod (SMOK morph 219) it keeps asking if it’s a new coil with a different size every time. Any advice? And no I didn’t forget.... the new tank is a vaporesso cascade tank 7ml. 60.5X25MM 81g.  

First off, I would like to say that I’m very new to vaping. I started off with a JUUL, then a Smok Novo 2, and eventually got sick of buying pods.

Now I have a Hellvape MD, and an Ares 2 - the first provides better flavor, but it’s still not comparable to what I was getting in my pod systems. I just recently purchased a BP Mods Pioneer, and I’m hoping that gives me better results. I’m using an Aegis Mini for a mod.

I’m trying to figure out what I’m doing wrong, because it’s really frustrating to spend all this money for worse flavor, when I was hoping it would let me save money.

I have about 40 bottles of salt nic flavors that are 50 or 35 mg, and a couple 3mg freebase I bought (120ml for $7 seemed like a steal). I would really like to get away from the salt nic, but I seem to get even worse flavor from the 3mg.

I’m using 2.5ID 28ga SS316L round wire from Master Wire Supply (I have a spool) with Puffs Organic Cotton. My coils are usually .7ohms, but I’ve tried up to 1ohm. I’ve also tried 1 ohm Vandy Vape Superfine MTL fused claptons, and experienced similar results.

I’m using the MD with the most restrictive airflow settings (3 small hole airflow disk), low (2-3) adjustable AFC setting. I have my coil as low as possible to the airflow, and I have thinned / fluffed my wicks.

I haven’t tried adjusting the airflow below the coil on the Ares 2, because the video instructions say wide open airflow below the coil is the best for flavor (I have found the opposite to be true for the MD).

Can someone provide me more insight?

Will 2mm ID coils with the same amount of wraps taste better than 2.5? Do coil ohms do anything for flavor, or does it only change how fast it heats up? Will I lose flavor if my coils hang outside the diameter of the airflow disk?
Is there a certain type of coil that would give me better flavor than regular round wire?

I use TC at 420F 20 watts


Any kind of feedback is appreciated and if I left anything out or you have questions about my set up that could help me out please ask! I’m at a loss on what to do, and it seems like no amount of research is helping  

Hey everyone! So it’s clear that things are changing for all of you who live in the USA. I truly feel for all of you, and I still can’t believe this is happening. But, what is the impact that this is going to have in all of the other countries that basically depend on the US market?

I live in Perú and in most shops, if not in all of them, most of the juice that is sold is directly imported from the USA. Does this mean that we won’t be able to purchase these items anymore either? And what about new devices? I’m aware that most of them are made in China but under American brands.

I understand that the USA has probably been one of the biggest markets in regards to vaping. How is this whole thing going to impact the rest of the world? Our vape community isn’t that big, it just started growing last year. Stores don’t really make their own e-juices, it’s hard to get good quality ingredients.

I’d really appreciate your thoughts <3  

Hey guys I’ve been enjoying vaping for a few months now and I’m loving it.
I’ve learnt how to fix some leaks and backspits so I am happy with that .
But I have washed one of my coil cleaning it under tap water and left it to air out for a week cuz I used another coil at this time.


I’m not getting much juice and the cotton in the coil is quite hard. So I’m sucking mostly Heat vape
But it’s not terrible or anything?

What should I do ?

Kind regards  

I caMe home from work and seen my topside single was lit up on my dresser.I hadn’t used it in a couple days so I picked it up only to see that the wattage is going down non stop and won’t fire and it’s as if the wattage down button is stuck. It’s not though. I can’t find anything small enough to take the panel off so I pretty mad. Only
I’ve had Mabye 40 refills with this mod and never been dropped . Just use it on the weekends when I drive mainly that’s it . This is why I hate regulated mods. Anyone else have this problem? I don’t know why it doesn’t even come with a Alan key to
Take it apart.  

I like my mechanical mods and my boxes, but lately I've really been wanting a regulated mod. I'm really wanting the Sigeli 150. Where would you order it from? I usually buy my stuff from local shops, but they're quite overpriced compared to online. Would love to have some input on online retailers with great reputations. Thank you!  

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

There is a lot of stigma around buying products from China and most recently I have been asked by many vaping friends. How I get my products so cheap...simple buy direct. They didn’t quite understand as they thought the products were either fake or 2nd due to the price.

So I’ve been recommending CIGABUY company I’ve used for over a year. I really cannot falter their fast shipping to the UK ranges from 4-7days depending on local delivery etc. Some say but I need coils now! Plan ahead its much cheaper and in the long run it will save you money.

I ordered two sets of coils for £19 and when I went to a local shop they basically wanted £30, but had a back log from thier supplier, 2weeks wait! Im not trying to put custom off the local shops at all just sometimes if you cannot get hold of coils it maybe easier. And most I’ve been too have recommended wholesalers. It wont put them out of business over a couple of sets of coils as I know only 20% of people choose this option. But for the likes of people who cant afford the higher expense its a good option


Hope this helps

See link CigaBuy

And have a good look round for more options happy vaping  

I’ve been away from vaping for about 7 yrs. I don’t have any of my old equipment, which now I miss very much. I’ve been trying to get back to vaping for health reasons, and having to learn all over again. Everything is dual coil. I NEVER used dual coil, but I’m trying to learn. I got a Vaporesso PM40, a Drag S a hcigar vt inbox and a POS squonker that I’m using for a dripper (reviews said they leak and short out causing me to fire by their self. I joy cappo squonk box).
Do I figure dual coil watts and amps like I did my single coil builds. I never got into the low sub-ohm thing. Maybe 0.9-1 ohm.
It’s good to be back in ECF again.