Searching For Some Info

Hi Albert I have a few different yihi chips one is an auto squonk and the other is the topside dual carbon I really like the temperature control of both of them and would like to find a single coil DNA to try out because I also like the power curves and everything is well I'm just having a hard time finding a single battery DNA squonk that's under $100. Any help would greatly be appreciated  

“I’ll NOT be doing THAT again!” - the famous Taurus War Cry was heard in our house this morning!

As happens to the aged, O500 hrs this morning found me suddenly wide awake for no good reason. As usual when this happens I got up, sat in my recliner office chair, drank a pot of tea, read for a bit, and visited forums until the rest of the world came awake accompanying all that with a vape.

However that vaping ( OK chain vaping for 2-3 hours ) was done with my new Feedlink Squonk, inadvertently loaded with 18 strength liquid, fired at 4.2 volts to begin with, through a 0.6 ohm coil.

Not good. Not good at all.

Having smoked since I was very young, inhaled even pipe tobacco etc I never reckoned I could get nic sic at this late stage … but OMG suddenly I got hit with the full repertoire, the sweats, the feeling of nausea, dizziness the restlessness where I couldn’t settle but had to prowl, the racing heart etc etc.

How did I manage to do it? Carelessness coupled with the old “it’ll never happen to me” routine basically.

I had grabbed a bottle of my old 18 strength Menthol Liquid, filled the squonk bottle without looking at the juice bottle’s label and chain vaped using what is in essence a protected mech mod with a new battery on a sub ohm coil.

I’m normally a tootle puffer with 1,6 ohm coils but OMG initially at least with the squonk I enjoyed trying DTL and blowing clouds … initially!

I’m sure the rest of you reading this will have more sense than to do anything like I did this morning, but trust me - I’ll NOT be doing THAT again!  

Hello all I’m new here, but I occasionally do read post for help . Anyway I tired to pull the center pin on my morph 2 230w and I accidentally ripped the top pin off . Can this be fixed ? Atomizer can still read it,but I don’t trust that . Any help is good, thanks all  

Temperature control testing results for the YiHi Sx Mini G Class are now available here and there are some particularly interesting issues to discuss imho: imgur.com/a/os23png

or

Temperature Control Testing Results: YiHi Sx Mini G Class (YiHi SX550j board) : electronic_cigarette

TLDR: This is an unusual one. You can get a sense from these charts of where the YiHi SxMini G Class got its reputation for being fast, accurate and smooth in temperature control mode, especially for when it came out a few years ago. But this mod created a range of challenges for our testing methodology and rig because of the pulsed (PWM) approach it takes to temperature control. What we do know for sure is that it does dry hit protection, and the temperature outcome falls within within a fairly narrow range that averages out to a fairly accurate and flat result, if a smidge too hot in most cases. But if what we are seeing is real, there may be a key difference that arises with this kind of temperature control method, where high fixed high power pulses produce rapid, tight, almost sawtooth changes in temperature in a narrow band. This is happening so fast it cannot be perceived in most states. This may be the basis for some of the subjective preferences for YiHi/PMW mods I have heard, such as it feeling "punchier" and producing better flavour (possibly from higher temperatures being reached which may have implications for those seeking to avoid thermal decomposition of their juice). Some insights may be drawn from the oscilloscope image at the end  

So do any knows if aspire figure out why the device is auto firing on it’s own. If not I been sitting and trying to figure out why? I been reading a lot and seeing people saying it’s a button malfunction, but I been messing with it. I seen that the air draw switch on top of the device goes inside air hole under the tank which controls the draw to auto activate was tilt and had juice around it. So I clean it and I reposition the switch back to the center. Mash it down to see if the auto draw react and it did and now it’s working properly. It could of been just me or aspire just didn’t understand there own device.. ‍♂️  

Hey guys,

I’m looking for a good regulated Squonk mod. Can you guys recommend which ones are good? I’ve heard good things about the dotmod dot squonk and the vandy vape pulse 2.

Are those generally the best options? Is one better than the other?

Thanks  

Greetings from TX, fellow vapers!

I’m pretty sure this question has been asked before, and I apologize beforehand if it has.

We all know about the proposed flavor ban, that’s a given. And it’s not a matter of ‘IF’, but more a matter of ‘WHEN’.

Sales of flavors will become illegal, but what about usage? If I’m vaping in public, will I be subjected to prosecution for ‘Possession of a banned Substance’, or is the ban restricted to sales only?

I’m so thoroughly dismayed and disgusted with the lawmakers and news media. I can’t trust anything that they say anymore.  

I hope I am posting this in the correct place.

Up til this year I have run mainly utilitarian stuff and it’s served me well, I have to say. I have however been looking at some of the rather beautiful stabwood mods folk on here have, and am considering one, especially now I have found a custom maker up by Loch Fyne near to my other house in the West of Scotland.

I have a few questions which I hope members can help with.

Do you use them when you are out and about as daily drivers, or do they need special care so you only use them at home?

I had a hand made wooden squonk mod a few years ago and the wood didn’t stand up well to leaks or coming into contact with e liquid which eventually jammed up the fire button. As stab wood is made using a resin - is it impervious to this?

Is stabwood prone to cracking over time?
And finally with reference to the Pumper squonk mod - the bottle and pump system is proprietary so is it long lasting and does it have any common faults?

Many thanks in advance for any information you can offer.  

Any suggestions on cleaning squonk bottles. I’ve got both silicon and plastic. Tried hot water in a plastic one but can still faintly smell the juice in it. Soon as both new mods come in hopefully the plastic bottles will be backups for backups.  

Most of the times I see people telling me about things weeks before release without any offcial info from the publishers , the subox is a good example , that thread opened a day or two before Kanger published the info . So my question is , where do you find all that stuff . My only way of searching wats new is going on fasttech and clicking new arrivals or going to kanger or eleafs sites . Those are the major comapnies that I know of , I dont really know that much else about others.