Just started vaping again and to my dismay, my all time favorite tank,
Wismec Reuleaux RX Gen 3, is nowhere to be found. Wismec doesn't seem to be doing much these days. Don't know if they went out of business or what.What a friggin bummer! I'm crying over here.
I've been through a great deal of SMOK's and Wismec's. Each seems to last me a year or less before the thing breaks. The buttons seem to just stop working on the Wismec's. If you've had a mod last you longer than a year, what kind was it? Where did you get it from?
Recommendations Please!
I loved this mod, but after 4 years needed to retire it due to shortened battery life.
Wismec/Jaybo RX mini
Reuleaux RXmini Kit
Bought this one next from Vape Wild and really enjoyed it, but after 3 months it completely stopped charging and wouldn't turn on. Never got wet and never dropped. Just very poorly made. That was money thrown away.
Geek Vape Aegis Mini
Geekvape Aegis Mini 80W Starter Kit
Got this one next, and it's been great, but the charging port has broken. Vapor DNA was great and they're sending a full refund.
VAPORESSO LUXE NANO 80W TC
Vaporesso LUXE NANO 80W TC Starter Kit – VaporDNA
So, now I need something new and am looking for advice for what to get. I really like the "mini" mods, but a long lasting battery and durability is very important too.
I would really appreciate suggestions.
Thank you!
Wismec 3 Battery? No good. Breaks within a year without dropping. Replicated on two mods.
Wismec 2/3 mod? Yet again, poor manufacturing. Wires not soldered properly. Almost lasted a year.
Squid Industries Double-Barrel? Craps out after 1 month without any damage. Wont turn on.
GeekVape Aegis Legend? 2 months and not reading the batteries right. Never so much as tipped over on my desk.
SMOK? Had more than I can count or bother to recall the exact models, but every one busted within a year.
None of them seem true to their warranties either. They make it as tedious a process as possible. I haven't tried with the Aegis Legend yet, but I'm going to go out on a limb here and say it's probably more of the same.
At this point, I am convinced that I have spent more money on mods than I have on juice. These mods are all made like crap. I don't want to spend $80 every few months to get a new mod. I just want to vape for gods sake.
Has anyone had a mod that has lasted them over a year? What kind was it? I've asked this before and that's what led me to the Double-Barrel and the Aegis Legend. Both have failed on me even sooner than my previous attempts.
Any of you folks own a Luxotic MF?
Do you love it?
I remember when they came out in '18 and the concept intrigued me. Designed for maximum user service.
I wouldn't mind getting one with bits and pieces but would like some feedback first.
Anyone?
Thanks!
Hello!
So I started vaping 5 or 6 years ago. Started with on of those ego pens and some kinda weird atomizer I don't even see around anymore and gave up on it within a month.
About 2 months ago I started again when my buddy gave me his old vv pen(not sure of brand) and his Nautilus (sp?) tank. I liked the flavor much more but it still wasn't cutting it. So I went to my local b&m and ended up with an egrip. Now, that sucker is what got it all started for me.
Within a week, I got the rba and started reading tutorials and safety tips for days upon days. Built my first coil on it and fell in love with rebuilding.
Anyways, I'm getting off subject lol. So I went with the egrip and upgraded to an istick 50 watt with a freak show RDA. Was buildimg on that thing daily, not for bad reasons besides addiction to building lol.
I used that for a while. Then i thought I wanted more power so I then upgraded to a sigelei 150. Using a lemo and magma exclusively. My favorite RTA and RDA.
Last week I was shopping around online and found a rogue RDA for 5 bucks and a kbox for like 12-15 bucks. Went ahead and ordered 3 of each because I figured if I didn't like em I could sale or give them to friends.
Well it turns out that this new 20 dollar set up is now my absolute favorite and don't see myself needing any of the other equipment anymore. Cept the lemo for drives and what not.
I just wish I would have realized this earlier.
Got a picture of it for you, next to can for size reference.
Not sure why the pic is sideways like that but tilting your head makes it look normal ha.
I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?
It's often been said to test a new coil build on a regulated mod before using it in a mech mod. Just for fun, I tested a new build on multiple platforms to see how consistent they a
These are AVS stainless steel premade quad core clapton 30x4/40 3.5 7/6
Two coils in a Dead Rabbit V2 RDA
Coil Master Tester 0.17
Uwell Crown mod 0.19
Wismec mod 0.18
Geek Vape Aegis 0.18
Vapresso Luxe 0.18
Closer than I would have thought!
Incidentally, the old coils were in there for 8 months, although this unit is in rotation, so maybe a months worth of actual use.
Also, the top cap was just about impossible to remove from the tube. I had to insert a chap stick into it and slam it on the desk for it to come off.
Hi I have a question about nicotine strength in my juice for sub-ohm vaping: I've only started vaping my tfv12 prince smok tank 4 days ago, so total newbie- used to do only mtl before that. I'm currently using Q4 coils, 0.4 ohm, vaping at 50-60 Watts: quite happy with a cooler vape, I tried them at 70-90 but slightly too warm for me, maybe in the future it will change.
Majority of the sites and youtube videos that I came across where sub-ohm vaping was discussed said that the maximum nicotine strength used when sub-ohm vaping should be 6mg/ml. So I've mixed a few juices, 70/30 vg/pg, ranging from 3-6mg nic. I noticed that I'm chain-vaping with very little nicotine hit. But i kept nicotine cravings sattisfied with my mtl device used simultanously.
Today however, I wanted to check something. I've mixed some 65/35 VG/PG liquid for my gf's smok nord pod a few days ago, with nicotine at approx. 11.5mg/ml, so I popped it into my prince tank to try it. Expected to choke on it but no- it vapes great at 60 Watts, tastes good (carnival sherbet concentrate + a little bit of strawberry cream concentrate added) nicotine hit: I can feel it, but unless I go crazy it doesn't make me nic sick.
Is this normal? Why do people recommend going max 6mg nic for sub-ohm vaping? Is it because they aren't recent ex-smokers or they never were smokers, and just use low nic liquids at their stage of vaping? Thanks
Just passed a bill that Regulates Vaping like it does Cigarettes.
Clark County passes vaping ordinance - The Reflector: News
Bummer. But can still vape in your home and in vape shops. Which i guess doesn't impact us too much. But where will it end...
Imgur version of post with all charts and analysis he imgur.com/a/vc6hvEr
Eleaft iStick Pico 75 - TC bang for buck that is remarkable - Temperature Control Testing ResultsArctic Fox Firmware 190624 Stock SS316 Profile : Vaping
The attached is the first of 7 charts/states tested and does not represent overall performance - see IMGUR or Reddit for full report and analysis, or the TLDR summary. See a full list of mods tested so far, at the bottom of the full post for comparison.
TLDR: I bought this little mod for merely $15 bucks in a sale, and yet other than one (repeatedly tested) very different outcome for a (rarely realistic) completely dry MTL coil, it performs very well as a temperature control device, with good power (unless youre a very high mass dual coil vaper, in which case you need a dual cell mod), tight and accurate temperature control that is arguably largely comparable to DNA in most states (see imgur.com/a/EOL9hRE for current DNA series comparison). Its hard to beat in terms of price for performance...lets see how the stock firmware compares in an upcoming test. This Arctic Fox firmware provides a lot of the functionality of a DNA device, its free, and its compatible with a lot of Eleaf, Wismec and Joyetech mods! More testing required to see if it holds up across that range.