Wismec Luxotic Mf

I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?  

Just started vaping again and to my dismay, my all time favorite tank,
Wismec Reuleaux RX Gen 3, is nowhere to be found. Wismec doesn't seem to be doing much these days. Don't know if they went out of business or what.What a friggin bummer! I'm crying over here.  

ok ... so there was a thread that showed insect droppings in some cotton someone got with a RBA ... but I can't seem to find it.

So I thought I'd have a look at the cotton sample in my Kanger Subtank Mini & .. sure enough ... bug bits & little black "dots" (bug poop I assume). Okay ... fine ... I've not used it & will not use it. I have enough cotton (bacon) to keep me going for years, and I'm happily puffing away on the .50ohm OCC premade coil supplied by ........

........and then it dawned on me that it was supplied by the same folks that put a wad of bug-gunk-ridden cotton in the box with my ST mini ... Kanger.

So ... the question is if anyone has taken apart the OCC coils & found little black specks in the cotton, or other foreign "pieces" ?? I'm wondering if the cotton Kanger uses for the OCC coils is the same cotton they give you in the box to wick the RBA deck with.  

I've been through a great deal of SMOK's and Wismec's. Each seems to last me a year or less before the thing breaks. The buttons seem to just stop working on the Wismec's. If you've had a mod last you longer than a year, what kind was it? Where did you get it from?  

So I picked up a 'spade bit' set for my drill and a block of wood at a home depot, went to town and made a little vape station:



In case anyone is interested here's what I used:

Spade bit set 1.5 inch sq. block of wood (pine?) (they cut a yard into three pieces) random piece of what I'm calling 'molding' to beautify the thing a touch A drill Just line up the spade bits with your devices to see which bits to use. Roughly measure how deep you will need to go into the wood so as not to go through the other side. Spade bits have a long pointy tip that protrudes beyond the cylinder they create, so using a different bit set would probably be ideal, this is a cheap/easy way to do it. With this setup you will have little indents in the center of each hole, but it doesn't bother me.

I still need to sand it, glue on the 'molding', and stain it. Should look nice after. Also, for the eleaf istick (50W) on the right, I had to drill 3 times with the same bit. The hole isn't perfect but some sanding should help. Mark your wood with pencil before drilling (measure twice cut once!), and/or do what I did and get 3 pieces in case you make a mistake (or want to expand later!).

Of course you could buy something like this, but this way you can have it be custom to whatever devices you happen to own. Cheap, efficient, space saving, easy to do (seriously, took me like 5 min to measure and 15 min to drill the holes).

Here's the spade bit set:

It rolls up nicely.

Here's the 'molding' with one of the un-drilled blocks:


I'll also note I have no experience doing anything like this, just kinda had a thought at the hardware store = )

Update

I sanded, stained, and poly-ed. It's not perfect but I'm happy:


He she is all loaded up:
 

So why don't some of us old-timers reminisce a little bit about how it used to be....

--I remember when new members would be struggling constantly trying to find the path to a satisfying vape
--I remember when the 510 came on the scene, with a somewhat lower resistance atomizer, and new vapers started having increased success
--I remember when 510 cartridge mods were all the rage, as folks kept trying to find a good way to continue getting those consistently good vapes
--I remember when the KR808D came on the scene, and cartomizers started pushing new vaper success rates even higher
--I remember the ensuing 510 vs KR808D wars
--I remember the Boge Cartomizers for the 510 models that may well have turned the tide towards 510 models
--I remember when low-resistance (LR) atomizers came on the scene and the ability to vary your "power" became a reality
--I remember the FDA court case, and the formation of CASAA from members on this very forum
--I remember when CASAA started working closely with long-time harm-reduction advocates, thus giving long-time THR advocates new life and consumer backing
--I remember when the Chuck came out with custom graphics
--I remember the Chuck vs Silver Bullet wars
--I remember when the Reo Mods came out, and took dripping to a whole new level
--I remember when Egos came out and new vaper success started to skyrocket
--I remember the Buzz, which if I remember correctly, started the variable voltage revolution
--I remember when the Provari came out and started the variable voltage wars
--I remember when the Nhaler came out with the Darwin and started the variable wattage vs variable voltage wars

And I look at that the New Members sub-forum these days, and find very few struggling at first vape anymore.
Success, now, is nearly guaranteed.

That's progress.



What do you all remember?  

and cut off little pieces of kanthal throughout the process of building them I use the bottom of my Sigelei 100w Plus to pick up the little pieces when I'm done because it's magnetic....

Just sayin  

PayPal responds to Internet fury over its new terms of service

PayPal User Agreement: New TOS lets company call and text you anytime | BGR

Well, if I cannot opt out, I will be closing my account. This will interfere with some transactions for me, such as possible classifieds here. I may just close it even if they do let us opt out. When they tried similar Bill Me Later terms of service conditions, I closed my account, and told them why. Just the fact they think they can get away with this, ticks me off to no end.  

I’m thinking a few years back. I remember that this military guy I think he was would sell these like acrylic?resin? carto tanks that had beautiful designs. There were auctions for them and people went nuts. What were they called? It’s driving me nuts lol.  

...or maybe it's Vapenico?

Has anyone bought anything from this Chinese vendor?

They claim they have warehouses in the US and Europe as well as in China but I can't find any user feedback on the net. They have some older products I'd like to buy but I'm uneasy about sending my money into the mist.

Anyone know anything about them?