Recently bought some white silicone sleeves for a mod because all that was left to by anywhere. Not a big fan of white pr translucent silicone sleeves because when they get stained it's impossible to clean them, not even bleach works.
I figured I could try dying them.
Anyone do this successfully before?
I've read about it on a few sites. One method is to use hair dye, but I figured I would ask here in case maybe someone has done it using a better method.
I also have a bottle of black RIT fabric dye, but I don't know if that would work well.
Just don't want it to rub off on my hands or clothes.
I'm getting leakage from the squonk bottle on my Asmodus Luna. The leak isn't from the bottle itself, but from around the cap and the sealing points. The cap is delrin, and I want to seal it all off at the sealing points, cap to the bottle, around the outside where the feed tube comes out of the top of the cap. I fill thru the 510 so won't be taking it apart once installed again. I'm thinking of aquarium sealer or this: Clear Silicone, Waterproof Sealant, Aquarium Sealant from Loctite Adhesives
Do you think it will hold up to getting nic on it?
So I got some great super clearance deals on some dual coil RTAs but I'm a single coil kinda vaper.
My thought was that surely I could buy some little blocks of food grade silicone to whittle down so I could make plugs to plug up the juice ports, air ports and take up air space on the side of the RTA chamber I won't be coiling and wicking. To do this I would need extruded blocks or sticks of silicone about 2 inches thick.
I thought this would be easy to find, but I'm at a loss. I tried ebay then google but no one sells little blocks or sticks of extruded silicone.
But maybe I'm using the wrong keywords?
Anyone know where I can find something like this?
EDITED TO ADD: I am open to other ideas. I'm not set on the idea of using silicone. It's the only thing I can think of that would work well enough to seal up air and juice ports as well as to block the air space in the chamber where the second coil will not be installed. But I am keeping an open mind.
$1.59 Protective Silicone Sleeve for Eleaf iStick 50W VV/VW Mod - black at FastTech - Worldwide Free Shipping
they have these for all i stick models and different colors as well . I got mine a few days ago and it feels much better in my hand now and more durable
I have several Pro Tank II's and replaced the metal tips with plastic tips. Seems like the plastic tips fall off all the time. Has anyone used a dab of silicone glue to keep them from falling off? Does Fast Tech offer any tips that are not susceptible to falling off so easy? It isn't a tank issue as all of the Pro Tanks have this issue. Advice?
Kanger SUBOX Mini White Starter kit Pre-order now, Please do not mix t – KangerTech
This black and white one is so sweet I GOTTA get one... you guys see this?
Im gonna need Kanger to stop stepping up thier game like this I wasnt ready...if this turns out to actually be as great a mod as it seems from the specs this is gonna be as big as the Subtank.
Only thing I donty know about is that black and white looks like paint on the subtank, I dunno if that'll stay on for long. It might look bad quick.
I have almost a dozen RTA common atomizers. Themis, OBS Engine, Vandyvape Triple 28, Zeus Dual RTA, the Cerberus Sub-Ohm Tank etc. etc.
The problem is that I drop my vaporizer fifty thousand times a day. The glass often breaks. Is there some sort of protective sleeve or anything else that might work?
Thanks,
Matt
Its been about 7 months since i made the switch to vaping but my teeth aren't white yet. They're much better but still not completely white. Does the nicotine have an impact to your teeth color?
I'm almost two years into vaping and it has been great.
I've been using a VW Ehuge 35 watt 26650 mod with a Kanger Subtank. Its huge and heavy but the battery lasts a long time. Also been using an Innokin Coolfire 2 with a Gladius tank.
Figured it was time to upgrade. Been watching several review videos to see whats out there. A lot of new sub ohm tanks and they all seem pretty good.
I've never had a box mod and figured it was time. Bought a Cloupor T6 recently to put my Subtank on. The T6 is supposed to be a 100 watt device. The Kanger coil only goes to 30 watts so no big deal there.
I really like the T6. Pretty small for a 26650 mod. Surface is slippery though, need to get a wrap for it. Butons are nice any clicky. The battery cover has magnets which is nice, no screw driver needed. Feels solid and the internals are clean. Its thick and the 25mm Subtank fits nicely on it.
Recently after watching some videos, I came across a new kinda unknown Sub Ohm Clearo. Its the Freemax Starre Sub Ohm. .5ohm or .25ohm coils. Mine came with the .5ohm. The .5ohm is rated 20-60 watts and the .25ohm is rated 20-100 watts. Reviewers were all impressed with the vapor and taste of this device. So I ordered one.
Wow, OMG, this Freemax Starre rocks. Blows away my Kanger Sub Tank in vapor production and flavor. Holds 5ml and the air holes are huge. Surgical Stainless Steel and Surgical Cotton used in the coil. Amazing.
After some more research, I discovered the Cloupor T6 really doesn't put out 100 watts. Well, that makes sense as its only a single battery device.
So went to the local vape shop today and bought a Sigelei 150 watt to put the Freemax Starre on. Will order some .25ohm coils soon.
Lovin the Sigelei so far. Magnets on battery cover, comes with a silicone gel case, nice clicky buttons, takes 2 18650. Its taller and wider than the T6 but not as thick. One thing it lacks that the T6 has is a USB charging port.
The Freemax Starre fits perfectly on it. The Kanger Sub Tank is wider than the Sigelei but fits perfect on the T6.
Really enjoying both of these box mods.
A few pics
I posted this in a thread but got no answers. I was wondering if anyone out there who has Delrin and Teflon driptips if they can tell the difference. I'm asking this because I have some delrin drip tips, and just recently received some teflon driptips I ordered. From reading about teflon, I'ts suppose to be sort of velvety and vibrant white. When comparing it to my delrin drip tips, the only difference I can really tell, or rather see is that my white delrin driptips are a more transparent white, while my new teflon ones are a more solid vibrant white. The texture feels the same for me with perhaps the teflon one being a bit more smoother/slippier MAYBE but im not sure. Are Delrin and Teflon suppose to be similar type of materials? Because they seem practically the same to me other than the transparency differences.
I have an orbit cannon vape pen. I believe it's 510 style.
I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.
Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.
The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.
Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.