What To Expect With Salts?

74 days without a cigarette so I’m still new to this whole vaping thing.

Started with Juul, got tired of refilling pods very quickly.

Switched to a Smok Nord. Have grown tired of the hit/miss with cools.

Just got my Zenith tank. Went ahead and got the Kroma/Zenith kit and it’s my first non-pod setup.

Like it so far. Only issue so far is there seems to be a lot of juice coming through when I take a hit. When I take a drag but put a thin white piece of cloth over the tip there is a very noticeable amount of brown stain on the cloth. Had the same issue when I got my Smok Nord but I corrected by switching from 50/50 nic salts to a 70v/30p freebase.

Currently Using the same 70vg/30pg 6mg Halo Tribeca.

Using the 1.6ohm coil;
Started at 14 watts;
Dropped to 11 watts and it reduced the juice but also the temp of the vape.
Adjusting the airflow doesn’t really make a difference.

Anyone else having the same issue with the amount of juice coming into their mouth? Is this normal with this type of setup? Did I flood the coil or something? I primed it with 5 drops then let it sit for about 10-15 minutes before taking the first hit.

Will probably limit it use at the house because I don’t want to carry around so much weight in my pocket.  

Hey guys,

I’m new to vaping. I have been a heavy 2 pack a day Marlboro light smoker for 20 years. I recently got into vaping and so far it has been an amazing journey!

I started with a small pod device (Caliburn) with 16MG nic salt. I found that I was still not able to quit smoking. I went back to my local Vape shop and got some 20mg nic salt juice, and that was too strong! It made me dizzy and confused and I just felt unwell. Even though @20mg I was getting a lot of nicotine I still wanted to smoke a cigarette.

On a whim I decided to give sub ohm vaping a try. I got myself a Lost Vape Thelema DNA 250c + a Freemax Mesh Pro 2 tank. I opted with 6MG freebase juice at 70/30. And sure enough it worked! I was able to quit smoking and have been smoke free for a week now!

My question though, is 6MG freebase nic @0.2 ohms (dual mesh), 70-80 watts too much? I feel fine for the most part and my cravings for cigarettes are under control. However from what I’ve read (and what the guy at my local Vape shop says) is that for sub ohm vaping you generally should stick to about 3mg of nicotine.

I know everyone is different, and you should do what works for you. But I’m just worried that with the large amount of Vapor I’m producing 6MG might just be a little risky.

I Vape quite a lot (200-250 puffs a day) and probably somewhere around 15-20ml of juice a day (at 0.2 ohms @ 70w the juice burns pretty quick). As mentioned above I generally feel fine. However sometimes I do feel a bit out of breath and like my chest is heavy. This could be gas (perhaps from inhaling so much air?). Or it could just be me adjusting from cigarettes to vaping. I don’t feel nauseous or have headaches.

Please let me know your opinions. Would really appreciate some advice from more experienced vapers!

Thanks!  

I got a great number of responses on my last post, with tons of useful information, so here’s another question I have for you all. What is the best type of juice for flavor in a MTL RTA?

I’ve found that lower mg salt nic usually tastes better than its higher mg counterpart - I.E. a 30mg and a 50mg bottle of the same juice will taste better in the 30mg option.

I’ve read about people smoking 0, 3, and 6mg freebase in pod systems, so I bought some myself to try it out in my MTL RTA (the lady at the vape shop said 3mg would have a lot more flavor than Nic salts).

I’m not sure if I somehow got a bad batch of juice (I have 4 different flavors/ 2 different brands so idk the likelihood of that) or what, but it doesn't have a prominent taste.

Ive tried from .6 to 1.2ohm coils with 28ga stainless steel single round, as well as some 1ohm mtl fused claptons. Is it possible to make the juice work with my current set up or do I need to buy different gauge wire and up my watts? I’m not interested in heavy cloud production, just flavor.  

I just got married and I had a job as retail salesperson inside a air conditioned shop.Now I am still quarentined overseas so I don’t know how will be the situation when I returned.I am a closet vaper,i recently invested on two mod,tank and many sub ohm coil,if I don’t use them I felt like I wasted and I don’t want to go through the trouble of selling them and lost money.I can sense that when I vape nic salt on a pod,my wife didn’t really complain and I myself felt more comfortable vaping it...whenever my wife walk out of the room,I would be chain vaping my sub ohm set up.I really hope I can use my mod and tank when all this f**king Conora virus is ok.Anyone can advise on my situation,or anyone here can sort of relate to me somehow?
Thanks for reading!  

I’m curious as to why you shouldn’t do DL when using nic salts. I’ve got an Aegis Hero with a 0.6 coil at 15 watts. Even with the airflow closed off, it’s still to loose for a MTL. I keep reading and hearing I shouldn’t use nic salts for DL. The worst thing I’ve experienced so far is a mild headache. The nic salt is a 30mg.
Thanks in advance. ECF is my only true support group and I’m having a really hard time not smoking the stinkiest. Been back to vaping for about a month, and keep telling myself it’s all about baby steps. Not how many I smoke but how many I don’t smoke. I’ve got to quit for health reasons.  

Currently I have a drag 2 with Wotofo unity rta

I was using geek vape mesh coils
and never had a bleeding nose I think there’s more vapor coming out of the rta

when I chain vape it’s usually when I am drinking(beer)

Is this normal issue i been doing good on cutting down on analogs I don’t want to go back to analogs  

With everything going on in the vaping world I was wondering if we’ll still be able to buy PG/VG premixed.
I buy premix PG/VG with nicotine already added so I’m wondering if I should buy 4 or 5 gallons to make sure I can get it.
Also I was told that if I buy a few gallons that I should freeze it or refrigerate it,is that right?
I sell mods and tanks so I have plenty to last years because I use to sell them on ebay until they ban selling them on the site.
I’m on private sights but don’t know what’s going to happen after April.
I live in New York so we already are have a juice ban so I mail it to a friend in another state and they forward it to me.
Now I’m buying premix so I can just flavor my own juice but I’m worried they might stop shipping premix PG/VG and then what will we do?
So any information on what’s ahead I’d appreciate your information. I’m new so I’m trying to learn how to find information on here.
Thank You  

Hey Guys,

I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.

To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.

I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.

I still do have a few questions I was hoping an experienced Mech user could help me answer:

- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.

- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.

- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.

- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?

- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.

- Any other tips you could throw my way would be great!

Thanks in advance!  

Hey everyone! So it’s clear that things are changing for all of you who live in the USA. I truly feel for all of you, and I still can’t believe this is happening. But, what is the impact that this is going to have in all of the other countries that basically depend on the US market?

I live in Perú and in most shops, if not in all of them, most of the juice that is sold is directly imported from the USA. Does this mean that we won’t be able to purchase these items anymore either? And what about new devices? I’m aware that most of them are made in China but under American brands.

I understand that the USA has probably been one of the biggest markets in regards to vaping. How is this whole thing going to impact the rest of the world? Our vape community isn’t that big, it just started growing last year. Stores don’t really make their own e-juices, it’s hard to get good quality ingredients.

I’d really appreciate your thoughts <3  

Last week on a road trip with my motorcycle club, I had to go back to the “ash tray”. It’s to dangerous on the road, on “two wheels” with these constant sneezing attacks. I bummed cigarettes, then bought cigarettes. There’s thousands of road miles planned this summer, I’m leaving again next weekend. I love to ride, hate cigarettes, the taste, smell and cost but vaping will surely kill me!

There isn’t much of anything here or on the WWW about my issue with sneezing attacks. Not just a little sneeze but 4, 5 6 or more with an irritable urge, watery eyes and nose. When I put down my vape for an hour, it goes away, when I hit it, it starts back. Allergy medicine doesn’t stop it and makes me drowsy. This just started about 3 weeks ago, it’s like I’m suddenly allergic to...?

I’ve been vaping since 2013 when my lovely 77 yr old Aunt shared her vape. I had tried everything on the market including prescription drugs and hypnosis to put down my 20 year pack a day stink habit. For 5+ years I’ve been using an RTA and DIY juice. I’ve been using the same DIY products from Nicotine River (fresh frozen) since Dec 2019 as well as same flavors, TFA, LorAnn, Capella and same recipes. using a VG 70/30 @ 8+ Nic.
For 4+ years with zero issues I used the Lemo 2. Yes an oldie, but ya no how it is when you find a good combination. Until last year, I could get all the rebuildable supplies at Fastech. Since 2020 I’ve been buying and using different RTA’s, RDA’s Squonks, mesh coils, etc. searching for a “new love”.
My tanks are Profile Unity, Zeus Dual RTA, Creed RTA, Drop, Brunhilde and Dead Rabbit. JIC it was the new packaged supplied wicks & coils, I went back to my old wicking material which didn’t help. Tried 100% VG with VG Nic Salts, no change. I’m at a dead end, totally out of ideas, I give up, still hate cigarettes but...

Any thoughts would be much appreciated!