Is A 100w Mod Enough For Double Coils?

Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.

Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?

I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!

1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!

Thanks in advance for taking the time to reply to this post and your patience!

Cheers!

Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?  

Somehow, I inadvertently pushed the buttons just wrong today and it went from 7 watts (my usual power setting) to 50 watts (the highest setting). I didn't even mean to push any of those buttons.

I experienced instant burnout and a horrible taste in my mouth and the coil was instantly ruined.

Do people really vape at such high power? If so, how often do you have to replace the coil? And how many ohms are you putting that through? The coil I replaced it with is 1.77 ohms which is about the same as the one I burned out.

50 watts seems so excessive to me that I double-checked and yes, that's what it says it goes up to. Even at 7.5 watts the coils seem to burn out too fast which is why I vape at 7.

I feel like Nigel Tufnel designed this thing. "But it goes to 50. That's 43 higher than 7. So it's like 43 more. So when you're vaping at 7 watts and you want that extra push over the cliff..."

(I'm actually impressed that Nigel could do the math to figure that 50 was 43 higher than 7)  

I'm new to RDA's, I have a Cloud werks RDA. I'm using a GeekVape aegis solo, I put in 1 0.45 ohm Alien Clapton 32gauge A1 coil, not sure if I can put 2 coils in. Anyway I have tried 50W to 100W and get very very little vape out and absolutely massive spitback (burned the F out of my tongue). Can I install 2 coils in this tiny RDA? I need help something is really F'ed up.  

I bought a Kanger Subtank and Atlantis V2, but sold them because they just weren't wicking my 100% VG liquid (Velvet Cloud & Gypsy eJuice) well at all. I tried using the atlantis with the .3 ohm coil installed at 70-80W, which was the stated operating range, and found it to be EXTREMELY hot. So hot that the tank quickly heated up to the point of almost burning my lips. The Kanger just burned the wick up at 20W+ with the .5 ohm coil, despite letting it sit filled for a few minutes and priming.

I am very interested in picking up a Royal Hunter, although I've no idea what pre-made coils (i dont want to make my own coils, just dont have the knowledge or time to learn how) and battery to get. VaporDNA sells UD pre-made coils in various resistances, but figuring out what resistance to use, and thus what wattage battery to get is where I am stuck. Not sure if it'd be better to run at lower ohms / higher wattages, or higher ohms / lower wattages. I'm not sure if it's possible to get massive clouds, but a cooler vape at the same time, but that's my aim.  

Hello.
So I think i kind like a cooler vape been getting some heavy lung feeling lately been vaping a 1.2 ohm single coil 28 g kanthal
cotton wick on kayfun clone v4 Tobecco, i would like to try like maybe 1.8 or a 2.0 ohm coil or is the kayfun v4 really better for
lower ohm coils I keep reading where the kayfuns sweet spot is like 1.2 - 1.5 i did lower my wattage from 14 to 12 but i like to seem some clouds more of a flavor chaser than a cloud person though
so i am just wondering if anyone has tried a kayfun around 2.0 ohms and what the vape was like
thank you  

could some one be kind enough to look at https://www.fasttech.com/product/2062405
I want to know if this 2 18650 will provide double the vaping time (what I want) or double the voltage (which i don't want)

do they have any that will double the vape time

thanks

alan  

So I've been building my own coils for a short period of time and I'm looking to better understand how my coils can affect my vaping experience, specifically varying ohms and wattage's.

I've been building mainly only one coil as I'm still trying to better understand the basics of coils and more importantly wicking. Ofc all I hear these days is how sub ohming is the best and with all the sub ohm devices I feel like I may be missing out on something if I'm not at .5 or below.

The coil I've been wrapping is a 28g .9 ohm single coil. If I were to go lower, how does this affect my vape on a regulated device? Unless I'm missing something, only the heat flux and quickness to heat would be affected right by lower resistance (given a set wattage)?  

Hi all and thanks in advance for all help.

I have

26ga + 32ga SSL
28ga + 32ga SSL

And for the life of me I can't workout how to get a coile wrapped at a decent ohms for a single coil to go in my aromamizer v2 single deck.

Can anyone help and suggest what's the best ohms to be using for single coil.

Thanks  

I got my first Derringer today. Wanted to try it immediately although I bought it with the DAY AFTER (May 2106) in mind... but you know how it goes, you get a new toy and you want to try it out.

I'm really not into very low ohms so first I went for a single coil - 26 AWG Kanthal, 9 wraps for around 1.3 ohms. But I didn't like the way that could be wicked in an rda. So then I put in two 28 guage coils which I had previously coiled for my other atties. Together they gave me .8 ohms which is sort of ok. But I still am not quite happy with the wicking. These coils are 2mm internal diameter and there's not a lot of cotton you can put in there. The taste is good but my wicking is nowhere as fat as I see in some pics online.

Any advice?  

Still use clearomizers?


It has been nearly two years and I have yet to get away from my single coil T3s/Mt3s or Protanks and the like.. Cheap, premade 50pk of coils are $2 and change and they're just plain simple, like me.

I also use egos for out and about/work and leave the bigger vv/vw devices at home.


Am I the only one that doesn't carry around a dual 18650 100w mod with a rda and 30ml bottle of juice everywhere I go?