Innokin Sensis Coil Life

I just burned through my first coil on my KangerTech Evod 2, and I started wondering if there was anyway to extend the life of a coil. Do big hits, or small hits make a considerable difference? Just wondering because ultimately it can either reduce or increase the overall cost of vaping.  

So my husband and I bought two zenith II tanks and inokin 1.6 ohm heads. My husband has not been impressed with the lack of flavor that it produces. Mine has been ok but I’m wondering if I need to clean the coil often? I usually use a nautilus tank and coil that I would clean each time I added liquid. Any help is appreciated as we bought 13 packs of these coils  

I’ve been vaping the same 2 mods for over a year and 1/2. They are Geekvape Aegis 100watt with Cerberus tanks. I use a couple of tank fulls per day. Lately I’ve been getting short battery charge life regardless of new coil or not, old batteries or new. I recently changed from .3 to .2 ohm coils, does that make a difference? Do these things wear out? I thought the only thing that ever needed replacing was the coil. I have 6 of the same unit in stock. Is it time to replace and pitch?  

The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...

 

Hey. I have a very annoying dry hit problem with my Innokin Zenith tank. I can't figure out what makes it happen. It happened on an used coil, so then i changed coils, but it happened again on the new coil.

I have 30% PG 70% VG liquid, didn't chain vape too much, had it on 14 watts, the tank was full, i had primed the coil...

Help is very appreciated!  

Hey guys what's up?! I just bought the Innokin Kroma R mod with the Ajax tank and I was wondering what other DTL tanks I could buy that would properly fit the mod. The Ajax tank is 24mm so I'm looking for something similar that has great flavor and longevity when it comes to coil life. Please help me out guys!

Thanks,
Brian  

Dear forum!

here goes my strange experience:
I’ve been coiling and wicking for years pretty much the same way, and it was kinda ok = I adapted to all the quirks I had.

Recently I built a new coil, but instead of 4mm I decided to make 3.5mm coil. Same wraps number.
Wicked it as I alway do - exact same material, thickness (adjusted to coil diameter of cores) trimming etc.

And wow!
No problem with TC now!
Works reliably, no leakage, I can chain wape the whole tank!

could this one Change in coil diameter choice did the trick???

Or is it a fluke? (Well I’ll find out when I’ll built next coil same way...but still)

best regards
Vadim  

Hi all,

I'm coming off a 2 pack a day smoking habit and have been vaping for about 3 weeks now.

I purchased the Caliburn G as this device seems like one of the best for nicotine salts.

They said nicotine salts is the best way to get off smoking and its helped a lot so far.

I'm on 30ml nic salts per 100ml bottle and I've got my smoking down to 3-6 cigs a day.

My question pertains to coil life.

If I chain vape, will this affect coil life ? And to what degree will it affect it ?

I've had to change the coil every 5-6 days so far, but from what I've researched, it is because of my chain vaping habit.

Can the coil last about 8-10 days if I don't chain vape, or is this pushing it ?

Also, is it normal for the liquid in the pod to become a dark brown / black colour after a few days ?

Thanks,

Andy  

Hey guys I’ve been enjoying vaping for a few months now and I’m loving it.
I’ve learnt how to fix some leaks and backspits so I am happy with that .
But I have washed one of my coil cleaning it under tap water and left it to air out for a week cuz I used another coil at this time.


I’m not getting much juice and the cotton in the coil is quite hard. So I’m sucking mostly Heat vape
But it’s not terrible or anything?

What should I do ?

Kind regards  

I was building my Avocado RTA today and for my second coil, I noticed that I must’ve wrapped it backwards as the upper leg went in the lower slot (the other coil had the top leg going in the top slot and bottom in the bottom). The tank reads on the ohm meter just fine. I am just wondering if I should re-wrap the coil so that the legs line up with the slots or if it’s fine as is? I hope this question makes sense. Thanks in advance!