I need orings as my Crown 2 tank is leaking. I have a digital caliper but I am wondering how do you measure them without distorting the perfect circle? Also since they are worn the size will be off a little. How do you compensate for that?
Also wheres the best place to order and what material like silicone is best?
Thanks
My favorite drip tip has a busted o ring and the other one on it is not fairing so well either. It is one from Suicide Bunny and i have taken some orings off other drip tips and they did not work out so well. I am also a big erkronogin used and those two small o rings on the top disappear very fast. I know those are 3x1 but that does not tell me in ID. Does anyone have a good place to get replacement Orings at? I have looked all over the place and since i am not really sure what i am getting i dont want to have a million orings around. Now i did find an oring set on ebay for about 13 and was thinking about picking that up. It says it has the 3x1 in there.
Thanks for replacement glass. I manhandled my subtank changing the orings lol.
Got a few old rda and rta need an oring or 2, I found packs in harbor freight but not much good although they have ~20 sizes inside, wondering if anyone has a good, quick idea for packs of many sizes of orings for our application, from Drip Tip sized to cap sized and all In between
I don't know if anyone has issues with their protank 2 but I hear a lot more negative than positive on them. I was messing with one of those bootleg ones and I couldn't figure out why it kept on leaking. Now just yesterday a friend gave me his protank 2 and Im guessing it was because he was tired of it leaking. When I first took it apart I took all the pieces off and connected them all again one by one making sure it was air tight as I added each piece. Everything was air tight until I got to the coil. I was taking a drag off it and it immediately started leaking and I was like why the heck does it do that? I noticed that it was leaking from between the coil and atomizer where the two little airholes are. What I did to fix this was take an old coil and gently pull off the little silicone ring (above where it says the ohms and below the wick) then I dropped it into where the coil meets the atomizer. After I just screwed in my coil and it works perfectly. No leaking whats so ever! Very good cloud production so far I recommend trying this if you have one. Sorry if someone already wrote this but I did a lot of looking around and never found an answer. Also didnt know where to post this so I apologize if this is the wrong section.
Can anyone that owns the Hellvape Grimm RBA, if you have a caliper, measure the diameter of the top barrel (in millimeters please)?
I would be grateful if you could do that.
Hello everybody,
I have a question about Sub Ohm Tank. Does every sub ohm tank has the leaking problem? I tried some sub ohm tanks. It has leaking problem more or less.I ask some people, they told me that such big tank has the leaking problem, and we can't avoid it. Is that true?
I know, I know... this topic has been discussed to death. And, I am in the process of searching now.
I have a TFV8 tank that started leaking a week or two ago. I tried all the usual tricks (empty and clean all parts, don't over tighten, replace o rings, etc). Nothing helped. After a few days of covering the mod with a paper towel everytime I took a drag, I decided to buy a new tank. The new TFV8 arrived yesterday afternoon, and after checking it out and filling it with juice, it is doing the exact same thing.
We are not talking about a drop leaking here and there, it is leaking the whole tankful in less than two hours.
Any suggestions?
Thanks!
Sent from my SM-G965U using Tapatalk
GS Air coils/GS 3ml tanks.
I Googlefied this and Did see One place that said A worn out tank could make coils not last as long. (Sounds near fetched to me...)
Can an old tank start Causing premade coils to show Low ohms, like. 05 ohm?
I am pretty sure these are factory coils not FT copycats.
Bruce in Ocala, Fl
Hi vapers.
So I wanted to change out the o-rings on my Crown IV tank as it has a bit of a leak when it's almost empty....
However, I can't figure out how I'm gonna get this o-ring out.
Any tips ?
Any ideas are much appreciated ! Thx !
EDIT: Got it out with a tiny dab tool !
Hey guys this is my e-cig: Zen Pen Electronic Cigarette Kit
I was wondering if the iSub Tank would fit on this? Also is this a good upgrade from the CE4? Any good websites to order from? Also wondering if this tank will crack for some juices as well as if I would have to replace this or the coils like I change my CE4 pretty often. If this tank wouldn't work any other good tanks that will last long and are fairly inexpensive? Thanks!