Smok Osub One

Hello folks, I am vaping a Smok Osub One and I was just wondering what are the best ohms coil to use I am currently using a 0.4ohms and any idea where to get them from cheap.

Kind Regards Steve  


Similar Content



How To Adjust Ohms On Smok E Priv?

I can’t seem to find the ohm settings on my smok mod, I tried calling the customer service number in Shenzhen and I think their closed for the weekend. Anyone use this mod or any advice? Thanks  

Coil Ohms Reading Question?

I have a new istick 30w that I use with a smok micro adc2. I've used it with a new 2 ohm coil at 8 watts and is great. I changed to a used coil I had cleaned and things got weird. It's a 2 ohm coil and the istick is reading it at 4.9! At 8 watts the throat hit was too much so I went down to 6 watts. According to the manual the istick doesn't even fire to 4.9 ohms. So let's see what you got?  

Best Pod System Opinions

Hey guys. So, I'm a current pod system smoker, and I've been using a smok nord as my actual pod system, but with so many new ones on the market, I'm looking forward to acquire a new one. I've seen many reviews and lists about new pod systems and am in doubt of which one to buy. So far, my picks are the Smok Nord 2, Lost Orion Plus or Smok RP80.
I like pods with loose airflow, to make big clouds and feel the nicsalt taste. I currently use a 0.6ohm mesh coil and do like it. Just feels like it run off too quick sometimes, I might use a wrong pg/vg proportion sometimes but always try to use as close to 50/50.
Let me know your experiences and what you think!
Thanks.  

Smok Under Brands In The Forum?

hi everyone,

I just joined yesterday and was wondering where the smok brand was on the list of brands on this forum? can it potentially be added?

thanks
Fizzypop92  

Smok Xpro M65 - Weird Voltage Increase/drop

Hello,

I've set my Smok xPro M65 with my Kayfun V4 on 15 watts at 0.8 ohm. However, the volts are changing frequently on vaping. Ohm and Watts stay the same just sometimes on vape the volts display 3.4v, the next time its showing 3.6v and changing etc ... its weird because ohm and watts are the same .. just volts change .. what may cause this ?

Kind Regards.  

Hex Screwdrivers For Smok Mag And G Priv Mods

HI
Those 2 mods crapped out on me, most likely broken connection of some kind, as both can not read attached tank.
Planning to pull apart and do my best to find the issue, but I realized that SMOK is uses HEX type screws and I need those screwdrivers.
I wonder if someone here knows something about those sizes, as they are very small - I tried my professional Dewalt bits, but they are too big, so I need tiny ones.

Any ideas appreciated.  

Smok Vct A1 Diy Coil Kit Is Amazing

I purchased my smok vct a1 at a local vape shop and was told the coils cannot be rebuilt another vape shop had the do it yourself kits for this specific sub ohm tank, the factory coil is a single, but the diy is a dual that tests at .41 my itaste mvp3 loves the diy, the flavor is amazing and so is the cloud, to the smoketek fans out there i highly recomend trying the diy, after watching the build video on youtube  

Xpro M80 Plus Keeps Changing Ohms Reading On Each Puff...??

I have the Smok xPro M80 plus and I have a couple Kanger subtank minis I use with it. I usually use .5 ohm coils. Sometimes it will show the ohms fairly correctly at .54 or even .61, which seems close enough. However, as I puff, the ohms reading will tend to change after every few puffs. Sometimes it will even say up to 1.5 or 2.0 ohms on the same tank coil! One tank seems to do it worse than the other, but the two I use now both will change quite often, and once in awhile quite drastically. It sometimes helps if I unscrew the tank and screw it back on, but if it isn't really tight, the ohms read are really far off from what they should be. I'm not sure if it is the tanks or the M80 plus that has the problem. When it reads really high, if I don't catch it before I take a puff, it is horrible and burny-dry, since it thinks the ohms are so high...

Has anyone else had this problem and/or have any ideas as to how it can be fixed??

By the way, I've cleaned the connections and everything thoroughly, so it's not that...  

Question About Higher Ohms

Hello.
So I think i kind like a cooler vape been getting some heavy lung feeling lately been vaping a 1.2 ohm single coil 28 g kanthal
cotton wick on kayfun clone v4 Tobecco, i would like to try like maybe 1.8 or a 2.0 ohm coil or is the kayfun v4 really better for
lower ohm coils I keep reading where the kayfuns sweet spot is like 1.2 - 1.5 i did lower my wattage from 14 to 12 but i like to seem some clouds more of a flavor chaser than a cloud person though
so i am just wondering if anyone has tried a kayfun around 2.0 ohms and what the vape was like
thank you  

Anyone Own Or Ever Vaped The Smok Tct Pro?

So while home sick (yes I was actually sick) today, several reviews sold me on the SMOK TCT pro as THE tank for my IPv4. I was looking for a high watt tank that could also make use of temp control. Didn't want another Atlantis and the Kanger subtank is good but it's just not quite enough for me in temp control mode. Anyone have any experience with the SMOK TCT or VCT pro tanks? Please share!