Preventing Residue In Pc Case?

I’m curious as to why you shouldn’t do DL when using nic salts. I’ve got an Aegis Hero with a 0.6 coil at 15 watts. Even with the airflow closed off, it’s still to loose for a MTL. I keep reading and hearing I shouldn’t use nic salts for DL. The worst thing I’ve experienced so far is a mild headache. The nic salt is a 30mg.
Thanks in advance. ECF is my only true support group and I’m having a really hard time not smoking the stinkiest. Been back to vaping for about a month, and keep telling myself it’s all about baby steps. Not how many I smoke but how many I don’t smoke. I’ve got to quit for health reasons.  

Hi friends, I’ve been busy with work and I haven’t been able to keep up with vaping news. Also, I felt kind of sad with all the stuff that was going on.

How are states reacting to the ban? Is that still going on? I’m not sure if I dreamt it or it actually happen, but I think I watched a video about how they were getting rid of the ban? And there’s going to be like a protest or something?

Sorry if the question doesn’t belong here  

Bear with me all as I have to be a bit verbose.

I have a boxer bf mod I have numerous Rda I am vaping mtl a juice I’ve been vaping 5+ years.
I didn’t use my boxer or any rda for a while. When I did a rebuild as usual I noticed a “bad” flavour. Like most of you I went through a series of steps to no avail

I changed atomisers did a new build and soaked (vinegar, then retainer brite, baking soda and ultimately boiled) the other one I confirmed if I drip the juice tastes as expected I changed bottles and soaked (like above) the bottle I took apart the boxer and soaked the 510 (as above)
Obviously these cleanings weren’t all at once. I tried vinegar. Then when that failed I tried retainer brite (great to remove discolouration but leaves a slightly mint flavour for a few draws),when that didn’t work I tried boiling.

At this point I’m starting to wonder if something is going on with the way the mod is activating. The only thing left I can think of is that for some reason (and I’m not sure why it would have developed) when the metal bar contacts the ring on the 510/feeding tube area there’s some kind of charge that’s happening and raining juice or melting plastic (which I don’t see). Either that or there is some mould or something deep in the 510 assembly.

Have any of you ever experienced this kind of flavour terrible all of a sudden? I have now tried 4 bottles with four tubes. I have cleaned every element at least five times. I have confirmed I’m not just tasting it wrong by dripping.

it’s clearly not the atomiser or build related. I have a hard time believing it’s bottle related after what I’ve done to them.

I just cannot figure this out. The next step of course is going to be to try and use the same bottles /atomiser on another mod but I thought I’d ping you all to see what your thoughts are - because in ten years of vaping I haven’t experienced this, and troubleshooting has taken hours so far.

Just a few final points
no shorting Very minor sparks as you’d expect from this mod and the way it makes contact at an angle Been vaping a very long time and building since almost day one The rda’s are authentic, stainless etc I’ve tried 3 of them at least It’s not wire or cotton
I’m stumped. Appreciate any thoughts.  

So I've been vaping 4.5 years now. Really still a low watt tootle puffer. I probably vape 6ml or so a day now and that has been as high as maybe 10 ml a day. For about my first 3 years I vaped 50/50, for the past 1.5 years mostly 70/30. Not one cig and yes, all bad physical signs from ciggies have appeared gone for ages now. All my juice has come from very well known suppliers.

I could/should? have taken a couple pics but I think I can describe the situation adequately.

I drive a 5 door Ponitac Vibe. I got it in Jan before I started vaping in April of 2015. So yes, I did smoke in this car for about 2.5 months. Still, I've Vaped in it Daily for at least 20 min a day for 4.5 years now.

Yes, I AM probably a pig but I still haven't felt the need to clean the inside of my car windows until recently. On the drivers inside window I've noticed a clear, flaky film on my window, bad enough that it's started to actually flake off. Interesting. One important note, I had the full inside tinted the month I bought the car so the windows were essentially sterile when I started vaping inside the car.

I critiqued things carefully. The film was by far the worst on my window. Next came the window Behind me. Next came the front passenger window with the cleanest being the passengers rear window. This makes perfect sense as the car HVAC is 100% aimed at me. There Really Is Nothing Else the flaky film can be but vape residue. Arguably very similar to what has actually been going into my lungs. Again, medically, I have no known respitory issues.

My tint peeps said clean with just warm water with a few drops of Dawn dish detergent. You'll recall that Dawn is what they use to get crude oil off of birds caught in oil spills, how be it much stronger amounts of Dawn than I'm using. So I got some micro fiber and *important* water As Hot As I Could Stand, Easily 130-140F and a dribble of Dawn in about a 1/2 gal container. This again was the reco from the tint folks to not damage the tint when cleaning it.

Now comes the scary part.

VERY Hot Water, light Dawn and Heavy elbow grease with the micro fiber were Barely Able to remove the vape residue. These were WAY WORSE conditions than I EVER want inside my lungs (to clean). Honestly, it took Three Heavy go arounds to get probably 95% of the residue off. Even Worse was honestly, I don't think the Very Hot water and Dawn were effective At All against the film. (??!!) Most of the film came off from elbow grease After the window was dry from any cleaning juice. Pg and Vg are Supposed to be water soluble and Water Soluble IS what you want near your lungs. My personal experience here Does Not bear out the Totally Water Soluble point, at least not to me anyway.

This is pretty damn scary if you ask me. I enjoy vaping but this will have me switching to 3mg juice Soon in preparation for quitting. As I said, I've already been decreasing my vape amounts before this.

I am not a Dr or a Chemist but I am fairly certain of this.

What I was almost not able to remove from glass was definitely vape residue.
It is logical to assume the same deposits that were on that glass are inside my lungs. BOTH have been exposed to vaping the same amount of time.

Honestly, to me, thus means a Much Higher Chance of some serious respitory issues from long term vaping.

Bruce in Ocala, Fl  

Takes a different angle... it’s the metals which have caused irreparable damage on a woman’s lungs...

in California though

The article goes on to say;

“Professor John Britton, director of the UK Centre for Tobacco & Alcohol Studies and consultant in respiratory medicine at the University of Nottingham, suggested that the conclusions were not all they seemed.

He said there was no evidence of any cobalt particles in the lung samples and that claims made about vaping were wrong.
He added: “There is nothing in this new paper that should change advice to smokers. If you smoke, switch. If you don’t smoke, don’t vape. And just as you wouldn’t buy unlicensed alcoholic drinks, don’t vape cannabis or other bootleg products.”  

Hello all,
I’m sure this has been discussed before as this is not a new tank, but after doing a search I didn’t find an answer. I also didn’t find much help on YouTube. I just pulled out my 2k18 doggystyle (I think that’s the correct version, it is a top fill) and built and wicked it. It has been so long since I bought this and read up on it, I don’t remember any of the tips and tricks.
As soon as I adjusted the airflow, ejuice started leaking in large amounts out of the holes. Luckily I was able to salvage most of the juice as it was premium juice I just bought from a store (not diy). What did I do wrong? Is it a wicking issue or is something else wrong? Any suggestions are greatly appreciated! Sorry if this has been covered before, but didn’t know where else to ask and I want to get this tank to work.  

I caMe home from work and seen my topside single was lit up on my dresser.I hadn’t used it in a couple days so I picked it up only to see that the wattage is going down non stop and won’t fire and it’s as if the wattage down button is stuck. It’s not though. I can’t find anything small enough to take the panel off so I pretty mad. Only
I’ve had Mabye 40 refills with this mod and never been dropped . Just use it on the weekends when I drive mainly that’s it . This is why I hate regulated mods. Anyone else have this problem? I don’t know why it doesn’t even come with a Alan key to
Take it apart.  

So I’ve been vaping for around 7-8 years and in all that time I’ve never broken the glass on any of my tanks even though they have all been dropped several times on many different surfaces. Well that all changed today when I dropped the bulb glass on my Uforce T2 while cleaning it during a coil change. Sadly I only have one and the extra is a straight wall glass that reduces the capacity. So I’ve ordered a three pack of bulb glass in case it happens again. I haven’t started a thread in awhile and thought this was the perfect subject to share with my fellow vapers. My diary entry says...”Today I became a man” I know it’s kinda B.S. that in order for us guys to be considered a man in today’s society we cannot have an intact cherry. I don’t make the rules, I just follow them, and although I don’t agree completely, I do feel a little different afterwards. Dare I say, more like a man. Anyway for you ladies thinking of breaking your first glass tank, here is some musical inspiration courtesy of Neil Diamond.

This is what happens when I’ve been locked up in my house for too long, scared of the world around me. Things get weird man...
Cabin fever  

Greetings from TX, fellow vapers!

I’m pretty sure this question has been asked before, and I apologize beforehand if it has.

We all know about the proposed flavor ban, that’s a given. And it’s not a matter of ‘IF’, but more a matter of ‘WHEN’.

Sales of flavors will become illegal, but what about usage? If I’m vaping in public, will I be subjected to prosecution for ‘Possession of a banned Substance’, or is the ban restricted to sales only?

I’m so thoroughly dismayed and disgusted with the lawmakers and news media. I can’t trust anything that they say anymore.  

Hey guys I’ve been enjoying vaping for a few months now and I’m loving it.
I’ve learnt how to fix some leaks and backspits so I am happy with that .
But I have washed one of my coil cleaning it under tap water and left it to air out for a week cuz I used another coil at this time.


I’m not getting much juice and the cotton in the coil is quite hard. So I’m sucking mostly Heat vape
But it’s not terrible or anything?

What should I do ?

Kind regards