I’ve had a couple njoy batteries that I’ve replaced when the times come. I just got a brand new one yesterday and it fell in water. I’ve put it in rice and it hits okay but once I hit it the light stays on afterwards for a long time. And the light is faint and flashing when it’s on the charger. Is there anything I can do to fix it?
I just bough my enjoy but it won’t charge like I plug it in it charges for like 5 seconds then the light goes off but when I take a hit the light blinks then I’ll put it back on the charger again but it will just go off. And yes it’s brand new oo it of the box bought it yesterday
Hey guys I’ve been enjoying vaping for a few months now and I’m loving it.
I’ve learnt how to fix some leaks and backspits so I am happy with that .
But I have washed one of my coil cleaning it under tap water and left it to air out for a week cuz I used another coil at this time.
I’m not getting much juice and the cotton in the coil is quite hard. So I’m sucking mostly Heat vape
But it’s not terrible or anything?
What should I do ?
Kind regards
I have an orbit cannon vape pen. I believe it's 510 style.
I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.
Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.
The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.
Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.
Hey Guys,
I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.
To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.
I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.
I still do have a few questions I was hoping an experienced Mech user could help me answer:
- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.
- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.
- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.
- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?
- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.
- Any other tips you could throw my way would be great!
Thanks in advance!
So I ran into a good guy I hadn’t seen for a long time who vapes DL. He’d recently busted his main vape and had picked up a SMOK as a quick emergency backup.
I suggested an ageis legend and a Doom atty to him, but he wants light weight, which is a specialty of neither of those devices. He can wrap and wick an RTA, has a lot of kanthal to use up, and wants a tank bigger than 3ml. The more the merrier I suspect. His batteries also suck.
So if it would please the participants, I’m looking for suggestions.
Mod:
- light weight. Small would be nice to
- reasonably high quality. He doesn’t need ruggedized necessarily but he wants it to last.
- Low cost (he’s willing to work with Chinese no-names and to shop China channel. He likes Ali-express)
- 2x18650, though I suspect a 1x2x700 would also suffice. He vapes DL so a certain amount of power is needed
- No Blinky Lights (this one is absolutely non negotiable)
Atty:
- DL
- Doesn’t leak (yeah I know. Anything will leak.)
- Capacity over 3ml
I’d personally like to add no paint or gold electroplating over pit metal. He didn’t ask but they suck bad.
Gonna mail him a link to this thread.
UPDATE:
Dude is an old ECF member and his account still works!
The person I was asking for is @rigorist
He will have more accurate data than me.
I’m curious as to why you shouldn’t do DL when using nic salts. I’ve got an Aegis Hero with a 0.6 coil at 15 watts. Even with the airflow closed off, it’s still to loose for a MTL. I keep reading and hearing I shouldn’t use nic salts for DL. The worst thing I’ve experienced so far is a mild headache. The nic salt is a 30mg.
Thanks in advance. ECF is my only true support group and I’m having a really hard time not smoking the stinkiest. Been back to vaping for about a month, and keep telling myself it’s all about baby steps. Not how many I smoke but how many I don’t smoke. I’ve got to quit for health reasons.
It’s been a day and half with out cigarettes, and I have quit multiple times before using sub ohm setups and a salt nic device. I have multiple of both. This time though... all I can think about is having one cigarette... how do I get this urge to go away? To not want to have one.. I’ve been vaping my a** off but i’m starting to smell them and they smell like s*** I’ll say that. Everyone around me smokes so it’s just kind of hard to this time I guess... my whole family smokes, my parents, my friends , I have a couple that vape but I don’t see them that much. Idk, just wanted to see what made it easy for everyone to finally quit. Thanks!
I caMe home from work and seen my topside single was lit up on my dresser.I hadn’t used it in a couple days so I picked it up only to see that the wattage is going down non stop and won’t fire and it’s as if the wattage down button is stuck. It’s not though. I can’t find anything small enough to take the panel off so I pretty mad. Only
I’ve had Mabye 40 refills with this mod and never been dropped . Just use it on the weekends when I drive mainly that’s it . This is why I hate regulated mods. Anyone else have this problem? I don’t know why it doesn’t even come with a Alan key to
Take it apart.
Hi, I’m kinda new to vaping. I just ordered an Innokin Plexar vape, and now i’m looking for batteries! I’m buying a 18650, since the others aren’t really available here. How many mAh do I need to get the optimal vaping time out of my device? Thank youuuu!
Hey guys ands gals, I’ve been vaping an awfully long time and now come to the conclusion it’s time to quit... I am in the U.K. , so I’ve not really got any idea of where I can get rid of most of my hardware.... lots in the collection.... I’m definitely not just dumping the lot of it, as it cost me quite a bit in the first instance.... obvs I will not be getting rid of any batteries etc as I can still use those in torches etc... I have managed to wean myself off nic salts (due to bad reaction) , and back onto less than 3 mg nic at the moment... I plan on making some 0 nic liquid to aid my quitting.... if anyone has any helpful advice- please post.... thanks!