Hi guys I got a Sigelei 30w mini + Mini Protank III. The stuff will arrive in like 3 days.
I'm new to this stuff so how many watts or volts should I start using it? Any other noob advice???
Hi,
I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.
I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.
I am not interested in a big old MOD or anything. I like the pen-like style.
I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.
Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.
Anyway, thanks for any input on this!
Ok sorry if I'm asking this in the wrong forum but I'm looking at a itaste ep 700mah and pairing it with a protank mini 3. Is this a good match? Also what wattage and volts would this be? Thanks on advance.
Will this tank break with certain juices? Also will it fit on my battery?
Zen Pen Electronic Cigarette Kit
Mini Kanger Protank 2 Mini Pro Tank Glassomizer
All of the sudden I wake up today and notice my 510 threading on my sigelei 50w box mod is jacked up. I cleaned the threads on my subtank mini and on my sigelei mod. I then tried screwing it onto my mod and now no matter what I try , there's a gap between the top of the mod and the bottom of the subtank (it's not screwing down all the way and has about a 3mm gap, hence now it won't fire...
I screwed my subtank onto my ileaf 30w and screws in flawlessly, so it's the sigelei threads ...
but I did pay a lot for my sigelei and prefer its hits , I dunno, I usually Vape about 16W on my sigelei And not sure how that translates over to what wattage I should run the eleaf at ?
Also, I just noticed that my spare RDAs will still screw onto my sigelei well..I'm so confused what's up !!!!
BEST THREE WORDS ON THE PLANET! *exhales* got it out of my system *_* Ordered a Kbox and the Subtank mini about 3 days ago. Traveling from CA to GA. Love 3 day shipping. So excited to get this, should be a big step up from my Protank 3 Mini and ego twist.
I'm about to buy one nd stuck on which one to get need help deciding thanks
So I am considering picking up a temp control mod and venturing into that side of vaping. I have been eying the sx mini but that price tag...whew. I've also heard sigelei will be releasing a 75w temp control model soon for half the price. has anyone used or own an sx mini? Is it worth the price tag or are there other mods out there better? I do not want the ipv4, I'm just not a fan of that mod. Suggestions?
I have been vaping with an EVOD and Kanger protank mini 2 for about a year and a half, I have finally gotten a box mod. Yay me! I know that there is much debate but I picked up an istick 50w and a sub tank mini, now I just have to wait for delivery.
Looking for a new inexpensive mod, currently trying to decide between Cloupor Mini or Sigelei Mini. Thoughts or other ideas?
Hey all. Been awhile since I’ve posted but I still snoop daily. Happy to say that this month makes a year off the cigs!!
I’m hoping for some advice on a setup I’m considering upgrading to.
For awhile now, I’ve been rotating a nautilus mini between my provari mini 2.5 and an istick 20w. I find I still get a more consistent flavor and vape on the PV but the istick comes in handy when I’m out and about. Ultimately, I’m looking to enhance my vape experience and hope to get more flavor and more vape production. I typically vape 70VG/30PG 6mg nic juices
I’ve been thinking of moving on up to a kanger subtank mini (found on sale for $30) so I can begin to learn how to build coils, etc. in hopes of saving some extra $$$ on replacement coils down the road. I’m also considering upgrading to a Sigelei 50 Watt VR2 (found them on sale for $50) so I’ll have plenty power for the tank. However, I have no experience with the Sigelei’s, just see that they are a fairly popular box mod with the community and online reviews. Also found the Sigelei 150w on sale for $80 but feel it may be too much for my needs.
So here’s my questions to you fine folks:
- In your opinion, do you think this setup (subtank mini w/ Sigelei 50w VR2) would be a nice upgrade for me based on the price? I’d really like a good setup that I can use to begin learning how to build but also want a mod that is powerful enough so that I won’t feel like upgrading a few months down the road. I also like the fact that I can still use/buy premade coils.
- To build a good sub ohm coil, what supplies are necessary such as what gauge/brand wire, cotton types/brands, tools needed, etc. Keep in mind that I’ve watched a few videos on building coils for this tank but am a complete novice and would need to purchase all the supplies/tools.
- Also, what are the best/safest 18650 batteries to power the sigelei?
I realize that I could probably search for this information individually through this forum and various review videos but am hoping for some additional input/opinions as well. Plus, there's so much information available online it becomes overwhelming and confusing to a noob such as myself.
Thank you in advance.