Closest To Subtank Without Being A Sub Ohm..

So Aspire have announced an Atlantis 2 and Atlantis Mega along with a CF Maxx battery.
Will I purchase these? Yes! Am I excited? No!

Aspire revonutionalised the vaping world with the birth of the Nautilus. When the Atlantis arrived everyone was excited that Aspire had made a new model, and expectations were high! No way am I claiming the Atlantis is garbage, but after looking at it, there wasn't really a big wow. It just kind of looked small and boring! But performance is the main point!

KangerTech most likely Aspires biggest rivals had taken first place with their SubTank series! Although I hate Kanger! The more options and reliability were so much better than the Atlantis!

When I heard Aspire were releasing these I had high hopes that we would get an Aspire RTA with more Ohm option stock coils and a 50W 18650 MOD! But... Apparently the Mega tank and the MOD is 30mm so pretty big! Also it charges from a USB and there is no rebuild section! So all in all a few minor upgrades including drip tip changes and more airflow. But nothing that will make you want to buy one straight away. I'm an Aspire fan! I will support them and make a purchase regardless! Just think they could of done more!

One last thing! I was kind of put off of the fact they called it the Atlantis Mega! When there's Kanger AeroTank Mega! I would of thought they would make the effort and come up with something more unique!

Video he https://m.youtube.com/watch?v=swQHODWlqMA  

So I recently gifted a friend of mine who is still getting his feet wet in the vaping world a Kangertech Aerotank Mega, and for some reason, he thinks you can fill it from the top, which I told him you definitely can not. I'll post the exact conversation here.

Him: you can do that with the Aerotank Mega too
Me: You can? I don't know about that.
Him: yeah but you have to be careful how full you fill it, of course.
Me: No. It's a bottom fill. The only way you could fill it from the top is if you only do it like halfway, due to the chimney being the way it is.
Him: then the mouthpiece part shouldn't be able to come apart from the tank, but it does, it's not even glued together.
Me: Yeah. That's called a drip tip. They're interchangeable. Your T3D is like that, too.
Him:
yeah, but with the T3D it's a seperate part that comes off, and doesn't leave the top of the tank exposed.
on the aerotank mega it's all one piece. either way, you can still only fill it so full from the top or bottom because of the center hole. it still holds a good amount though.

So, yeah. I'm pretty sure the only way you could possibly fill it from the top is if you took the top half of the chimney off and filled it that way, since the chimney is kind of in two pieces, but then you could only fill it to the spot where the chimney splits. Anyone who can definitively settle this for me?  

I just got my Aspire Atlantis in, and to be honest I'm not at all satisfied, and I can't help but wonder.... Did I get a defective unit?

I bought it and the Kanger Aerotank Turbo quad coil tank. My resistance on the Kanger is registering at 0.9ohm and I'm sending about 23watts to it. The amount of vapor is excellent, flavor is good, and it's not an overly warm vape at all.

So then I slap on my Atlantis. The 0.5ohm is registering at 0.6 (big whoop...lol) and I'm sending 28 watts to it. First, the hit is BEYOND airy. I'm on the lowest airflow setting and there's no pull required at all. I believe it isn't sealed well somewhere along the airflow adjustment, because when I blow a bit of vapor back into it as a test, it comes out of the airflow hole (obviously) but it also flows out of other areas around the airflow ring. This doesn't happen with my Aerotank Mega, Aerotank Turbo, or my Nautilus...

Furthermore, the hit itself is just BAD. The flavor is off, the vapor is WAY too warm to be enjoyable, and where as I exhale nice sized clouds using the Aerotank Turbo, I exhale pathetic small clouds that aren't even thick when I use the Atlantis. Considering its a lower ohm with more watts going to it, how is that even possible??

So, no resistance at all on the airflow, even on its smallest setting, and obviously I have to be getting air from some areas around the airflow ring. The vape itself tastes bad (not burning cotton bad, just a bad flavor), and it's VERY warm. If I try and pull on this the way I do with the Turbo (only 0.3 ohms higher), I exhale a measly small thin cloud AND I often get choked when doing so.

So I'm just curious.... Is this the way this tank hits?? I can't believe how many praise it if so, I see no appeal. So I can't help but think I must have gotten a defective tank. I've tried lowering the watts down to about 22watts just to see, and even though the vapor wasn't AS hot, it was still uncomfortably warm and did not do my liquid's flavor any justice.

Any thoughts? I really would like to hear if this is how these new sub ohm clearos are going to hit, because if so I have absolutely no interest in making the switch.

Thanks in advance,
Finch  

Curious if any of you have gone to the Kanger Aerotank from the Nautilus Aspire tank? I have two Nautilus tanks and I have to say it is real hit and miss when I change the coils out. Sometimes I will have a clean hit and no burnt taste and other times it is burnt tasting for the life of the coil. A local vape shop told me to switch to the Kanger Aerotank. They did not have it in stock so I ordered it to try. Yes I am doing the whole prep scenario with the drops and hitting it 4 to 5 times before hitting the button. He told me it is common with the Nautilus, but not with the Kanger Aerotank. Any feedback?  

Hi guys I'm a returning vaper... I vaped for around 2years and then ended up going back to smoking but I was using a aerotank mega as I found that hit all the right spots for me... I know its old school and a lot off people will say why don't you look for something more modern as there is so many good options but I'm a bit old school in my ways and I like to stick to what I know i like... Iv tried looking everywhere for one all sites on Google, gumtree, shpock, eBay.... Everywhere!!! Lol and not had any luck so far (edited/Rules)  

Hey guys I'm looking to upgrade from what I have right now which is the atlantis v1. I'm not a huge fan of the atlantis because of the inconsistency with the coils and the loss of flavor after 2 tank full. The atlantis v2 seems nicer with the occ coils and improved airflow, but I'm not sure if its worth the upgrade since I could just get the new 5-pack occ coils for my v1. The subtank mini still has better options with the occ coils and RBA. Also it seems the occ coils for the subtank is easier to rewick which could save me a few dollars.
I'm not sure which one to go with. I'm leaning more toward the subtank, but still not sure. Maybe someone who has either one or knows more about them could help me. I like to have a good amount of clouds while still keeping the flavor.

Or if anyone has a sub-ohm tank they could recommend that they like more than the ones I mentioned that would be good too.

I use an ipv2

Thanks  

So I'm deciding to try sub ohming and see if I like it, now will the sub ohm kangertech atomizers work in an aerotank? Also would an aerotank mega with sub ohm coils and a istick 30w be a decent setup for clouds? Or should I get an actual sub ohm tank like the Atlantis?  

Been building my vape hardware collection lately and at at the point where I wouldn't mind another good subtank, but it must have an RBA with it. Gotta be able to rebuild it! hah

My current lineup includes a Subtank Mini on the XPro M80 Plus, a 30w iStick, Doge, Dark Horse (by FAR my favorite RDA I've had or tried), and a Hades Mech. All decent stuff but I'd like to have another tank for my collection. What's a good (and decently priced) tank to go with my Subtank? I'll say this, I've tried the Atlantis and didn't care for it so don't suggest that. Any other suggestions?  

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance  

An Aerotank Turbo. Found new for 18.99. I can share the link if its permissible and anyone wants it. I love my Aerotank and 2 subtanks and this seemed like a good middle ground. Then I watched the reviews lol. Doesn't look like I'll be taking the turbo out with me but it still seems like a cool novelty kind of. I already know it will be awkward on an istick, maybe better on the MVP3. Anyone have one that loves it?? Btw if you poke the sides of your occ coils with a safety pin and fluff the cotton a bit, you can chain Vape your Kanger Subtanks at like 35 watts. Alright peace and happy vaping!