Everything Else Is Obsolete.

I’m a mouth to lung vapor and currently using the holic rda and galaxies rdta. I’ve tried using ni80 round wire and superfine mtl fused Clapton ni80 wire. The round wire is so easy to work with and the superfine is harder but I’m getting the hang of it. My question is with coils that ohm out the same with each wire I get flat flavor with the round wire and the flavor definitely pops with the fused Clapton wire. Is this normal? Same juice, same wattage, same ohms and same rda and squonk.
I love working with the round wire but not worth it if I can’t get better flavor.  

I just given druga rda v1 authentic.i tried to build it used clapton,fused clapton,alien,and simple wire with 2.5 & 3 mm id.but i got no flavor.my drop clone can beat it easyly.its frustating me.somebody please help me.what is the best build for my druga?  

Hi, I just got the 8 in 1 pirate coil kit with 8 different sets of coils, I'm trying in a nonmechanical mod with the DejaVu RDA with a dual 0.45 Fused Clapton Coils, and I need help calculating at which wattage should I vape for Maximum Flavor.

Thanks for the help  

I have a dna75 single 18650 that I take out with me.
I just ordered a bunch of small'ish MTL clones to use with it (Spica, Prime, V5, Millie, Gate).

I also have a DNA250C triple 18650 that I use at home.

I never used TC and don't really want to learn it nor power curves but might have to learn that later if I feel the need to. I already prefer and am grateful for escribe customization so maybe TC and curves won't be a PITA to add.

I couldn't get DNA250C's idiot-proof Replay Mode to work the one time I tried it with a dual SS fused clapton (others have had this problem, maybe it was the tank I was using).

For DNA250C bigger builds, I just ordered an Aromamizer V2 Plus RTA. And a Fatality 25mm. Fatality I might also use on the DNA75 with a smaller coil so battery easily lasts a day.


I'm guessing for the smaller MTL tanks to get round 316L if I do TC, and for wattage mode some Kanthal. I'm OK with even buying a DNA75C for Replay mode if the MOD is small sized though.

I really don't like ramp up time even with smaller coils, so maybe I should just learn TC and get 316L wire? For the DNA250C builds, ramp up would be long but I'm hoping Replay Mode will easily solve that.

Not sure which gauges.

And/or maybe for the MTL smaller builds get some thin clapton or something besides round? I don't want to kill the battery fast though but am OK with smaller puffs.


I already have some all-SS 316L Geek Vape Fused Clapton 26ga * 2 + 30ga, so that should be good for the bigger builds and Replay.



Thank you  

I have a TM 24 pro. I threw In a pair of Juggernauts just for astetic reasones.
I also have the geekvape mesh pro atty. With some, (most) juices I get a better flavor from from the mesh pro. With the TM24 pro and the Juggernauts I obviously get significant more vape. But my tank atty gives me more flavor. I fear pushing the 24 pro with the Juggernauts past 120-130w just because of the batteries i current have. Is it just the Juggernauts giving me the lower flavor or what? I have other coils, the alian, interlock alian, and the staggered fused Clapton. Is it the coil, our just the cloud chucking RDA o have.  

Hey Guys,

I have been learning the ropes of RDA vaping, and so far I absolutely love it! As the title states I’m wondering what coils (FC, Aliens, etc) Would be best for flavor and vapor output? I’m currently running some Wotofo 0.33 Fused Claptons (~0.17 in dual coil) @ 60 Watts. The flavor and vapor is ok, But I’m looking for a little more. Maybe something I could run at a slightly higher wattage and get more vapor / flavor?

Any help would be greatly appreciated!

Thanks!  

Trying to find my happy place.......

I have been playing around with ohms and watts more since I got into rebuilding and have found sub ohming changes the flavors too much for me and the throat hit gets a bit harsh.

Tootle puffing does not satisfy my need for thick rich vapor.

Still looking for my version of perfection. I have gotten close with a few higher ohm builds that still get pretty good vapor production, but I just haven't gotten my vape nirvana yet.

Maybe I need to meditate over my builds?  

I've been vaping out of my new coil today and I noticed my coil is turning brown in 1 day! The flavor is tasting metallic and I make sure everything is full and don't chain vape is it possible to get a faulty coil? (pre-built coil) I also did prime it and even left it for 10 mins to fully soak.
Any help much appreciated hope everyone has a good weekend  

Hey everyone, I just wanted to post my setup here, nothing to fancy so just take a quick look and feel free to leave a comment or reply.

To kick things off I've got a Seeker Mech Mod by EHPRO. It's a sleek design, all copper, and easy to press button. Little short and thick for those of us who like our setups to look beefy.

Atty- The Tobh Atty. It is a pain in the butt to take apart from the get go but once you get a bit of juice on all the O rings it comes apart fairly easy. Good deck to build on all pre-drilled holes on the three posts 1(+) and 2(-) (Obviously). Deep basin to hold plenty of juice for our drip and drivers safety. My current build is a dual single coil coming in at 0.28 ohms. Using a regular cotton wick.

Juice- "Bliss" made by The Artisan Vapor 100%VG This juice is an explosive flavor of fruits, and for being 100%VG it has a heavy flavor. 39ml bottle runs at 20$ not to bad for a good juice. When I drip with a full basin it lasts roughly an hour, and I heavily use my vape.

Battery- This thing is one of the best right now but I'm still limited on what builds I can do. My 0.28 is safe, however my 0.22 is unsafe (Go figure) ANYWAYS! (Specs) MNKE IMR-26650 3.7(low) 4.2(High) 3500mAh.

So I think that's all. Thanks for reading guess, and questions or comments just drop it down below. Goodbye and VAPE ON!
 

I have tried this a couple of different ways in other threads, without really getting edumucated completely.

One more try. I generally consult that Power Chart 2.0 to identify safe vape ranges for different resistances.
Some say that those charts do not apply when there are two coils in parallel. I don't understand how. At the end of the day, the resistance is the resistance.

Anyway, is there a chart anywhere that can identify Safe vape ranges for different resistances - when the coil design is not single but dual, in parallel.

My clearo, by the way, is a dual coil Eleaf GS Air. I love what it does in the safe range, but when I occasionally cheat and push it up a bit, I Do get more vapor and flavor. But, I don't want to be doing it if it isn't safe. [aka firing hot enough to generate formaldehyde, etc.]
Eleaf says it is designed for 3.5v to 5.5v. But then again, any company citing specs is focused on selling, not necessarily my safety/health.

Anyone have a genuine factual answer?