I Don't Want To Waste My Money

Hi all. I've been thinking of trying the Aspire Nautilus tank on my MVP 20w since I've read so many good things about it here. I'm doing mouth to lung vaping and I have an iStick 30 on the way too.

I just want to confirm the Nautilus tank will work on both mods? And what replaceable coils should I get for the Nautilus? Thanks!  

Hey. As the post states Im trying to decide what online store to buy my next purchases from. Im looking at buying a few different things. It is basically a new start into the world of rebuilding.Both RTA and RDA. Maybe a regulated device or mech mod, but Im more concerned with tanks and attys. I also need to purchase a few rebuilding tools.

Here is what I have so far and where Im headed:
Already have Kanthal A-1 26 and 29 gauge wire. Also have Koh Gen Do Cotton. Also have tweezers, clippers, pliers, scissors,etc. Basic stuff. My setup is iStick 30w and Nautilus Minis.

Looking to get:
1 or 2 RTA's (almost certain on Kanger Subtank Mini)
1 or 2 RDA's (possibly Magma)
Coil Jig, Screwdrivers, spare parts such as o-rings, etc
Any other useful things not already listed. Not opposed to authentic or clones. But im not gonna spend a small fortune

As far as websites are concerned Ive looked at Fasttech and Focalecig alot. Leaning towards Fastech but really dont want to wait a month ...

ANY HELP WITH BEST WEBSITES AND GEAR WOULD BE MUCH APPRECIATED.

Thank you guys always  

I have had my istick 50w for about 24 hours now. I the issue I am having is that all my 1.8ohm tanks are reading 2.0ohms on the display of the iStick. This is the case for my Aspire ET-S and Nautilus Minis. On two occasions the Nautilus tanks have read 1.9. Never 1.8. Even with brand new coils. I get the same result on 4 Nautilus Minis and 3 ET-S tanks. I get the same results with the mod turned off when I screw on the tanks as I do with the mod turned on. Any ideas or suggestions?  

I'm currently using a Vision Spinner battery with a few ProTank mini 3's (Which look quite nice together infact - so long as the battery matches the tank). I'm wondering what I should upgrade too.. I'm not really looking to get into mechanical modding yet as I'm not made of money. I'm more or less looking for a better battery with a better lifespan, I'm having loads of problems with my vision spinner and I'm looking for something that could replace that.. Anyone have any good suggestions? Thanks!

Edit; I found this: Aspire Premium Starter Kit [VE754-B1] - £49.95 : Vape Escape and was wondering what your guys opinions are on it  

I have been out of the game for a while and have just been using old mods/RTA's.

I am looking for suggestions on some of the best up to date mods as well as some of the best RTA that go with the mods.

Here is a little info...I usually vape at around 30-35 watts...

For the mod, I am looking for one that takes a single 1865 battery, is small in size, and is lightweight.

For the RTA, I am looking for a single coil DL tank....one that can hold at least 5ml of juice, can go with the mod suggested, and provides great flavor.

Can you guys please give me some suggestions? Thanks a lot  

I just bought an eleaf istick. I was using, for the few months I've been vaping, only eGo type batteries and decided to spend a little more on a mod and an RTA (EHPro kayfun lite).
The istick just arrived. I know it's not the most advanced piece of vaping hardware, but it's a huge step up from the eGo c twist.
I mean, with the same clearo (nautilus mini), the same juices and, allegedly, the same voltage, this thing makes my vaping experience so much better it's almost unbelievable.
If you're using an eGo battery, and you're serious about going on vaping and quiting smoking for good, by all means buy a regulated mod. It's really, really better.
I realize in the U.S. it's not a big deal, you can get a mod by $30 or less, but here in Brazil an istick goes for at least $100,but it's worth the money.

Now I expect the kayfun to be another step up, after I get decent coil building and wicking skills.

Just sharing the experience anyways.

Thanks for all the help you at this forum give to us at the community.

Cheers!  

Hi everybody, I have lost track of new vaping gear and need an advice.
Finally one of my mods died. The newest one, Joyetech eVic Primo. Bad from the beginning (because of its faulty protection) it just stopped working. Another mod should die soon. It is a clone of iStick 30, 4+ years old. It's my best mode, but its battery already is at about of half capacity (after about 1500 charges).
So, now I use iStick 30, iStick Pico 25 and iStick Pico. Tanks (from best to worst) Kayfun 5, Siren 2, Ammit, OBS Engine NANO.
I need a new mod and, possibly, a new tank.
Thanks for reading.  

Hi I was interested in buying my next Vapor Mod and am a little torn on what direction to go. A chargeable mod or one that holds a battery such as an 18650. The Mods I think I've narrowed it down to are these 3:
iStick 50w , MVP 3 , or IPV Mini 2 70w

Can anyone help tell me what the benefits of a mod that holds a battery are? I currently have an iStick and like how I can just plug it in and charge it up. Do you lose vapor production as a removable battery mod loses its charge? What are the benefits and cons of each? What one should I choose?

Thank you guys always  

I started vaping and smoked my last cigarette Oct 12th 2013. I started with this..

This was my first setup and I loved it when I first got it. Then I got sick of dealing with the ego-c atomizers and upgraded to an Evod and boy I thought that was awesome! Lol.
December 6th 2013 I got my MVP2. (I remember the date because I got it the day before my friends wedding that I was in). Then came other clearos like an I smoke bcc mega, protank, etc.
Christmas 2013 I got an iTaste vv3 along with an iclear30s. I used that setup for quite a while until the Nautilus came out. I got one of those and used it up until last Christmas when I got an Atlantis along with an aspire sub ohm battery. After using that setup for a few months I really missed having a regulated device. I missed all the features and the adjustability of the MVP but wanted something more powerful that could power my Atlantis as well. So a few weeks back I ordered a 50w istick and that's where I'm at now.
I have yet to get into rebuilding but would like to try it out with something like a sub tank mini.
So when did you start vaping and how have you progressed?

Sent from my VS980 4G using Tapatalk  

Hi, folks. I've been vaping since 2009 and certainly went through years of trying new devices (Anybody remember the Screwdriver?) But I stopped keeping up with new products and technology once I found a set-up that worked for me.
I use an original Aspire Nautilus 5ml tank with BVC 1.8 or 1.6 coils and flavorless liquid that I mix myself. I've been powering the tank with variable voltage batteries such as the Spinner 2 or, more recently, the Kangor Evod VV 1600 mah. Both the tanks and those batteries have become increasingly harder to find.
Have to say, after the Screwdriver, I was never interested in getting another device with an external battery. But as we all prepare for the (senseless) demise of the on-line vaping industry, I've been trying to quickly learn about regulated mods. I need something safe and reliable that will take an external rechargeable 18650 battery and will also fit my Nautilus tank.
I know the technology has advanced light years. Frankly, all the info out there is pretty overwhelming.
I don't need a lot of power or tons of vapor. I tend to stay between 3.2-3.4 volts with the airflow on the tank wide open. I'm most concerned about quality since buying mistakes will soon be harder to remedy. (Some of the worst products I've purchased-- with the highest price tags-- were from local vape shops.)
Any suggestions for an APV from folks who also use the larger Aspire tank?
Thanks.