Hello everyone!
I have been an happy vaper now for 5 years. Like most of the old beginners I started with cartridges, blue foam, cartomizer and so on. Currently I am using Kanger tanks, T3, Evod 2, MiniProtank and Aspire ET-S BVC, with Vision Spinner VV but I am looking for an upgrade.
I am not looking for an RDA, nor big battery and definitively not sub-ohms. I'm looking more for a glass tank, adjustable airflow, large capacity, and the ability to see the liquid.
Thank you you all so much for any advice, and happy vaping!
I've been using disposable clearomizers since I started vaping, with an 808 kit, and that's been working fine for me, but I came across a super cheap deal recently for a Kanger Evod starter kit, so I bought one. I paid about $14, so it was a no brainer.
The tanks have these disposable coils, but the tanks seem like that they can be re-used forever, as long as they don't crack or fall on the ground and break, is that correct?
I saw that they sell a glass tank for it also, so I think that I'm going to pick one of those up, and I'll be able to vape on any juice that I please, without the fear of the tank cracking, and I'm assuming that that tank will last for a very long time.
So far I'm pretty happy with the Kanger Evod, and I like the vape from it.
Just two questions.
Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.
Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?
Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance
I'm currently using a Vision Spinner battery with a few ProTank mini 3's (Which look quite nice together infact - so long as the battery matches the tank). I'm wondering what I should upgrade too.. I'm not really looking to get into mechanical modding yet as I'm not made of money. I'm more or less looking for a better battery with a better lifespan, I'm having loads of problems with my vision spinner and I'm looking for something that could replace that.. Anyone have any good suggestions? Thanks!
Edit; I found this: Aspire Premium Starter Kit [VE754-B1] - £49.95 : Vape Escape and was wondering what your guys opinions are on it
Hi, folks. I've been vaping since 2009 and certainly went through years of trying new devices (Anybody remember the Screwdriver?) But I stopped keeping up with new products and technology once I found a set-up that worked for me.
I use an original Aspire Nautilus 5ml tank with BVC 1.8 or 1.6 coils and flavorless liquid that I mix myself. I've been powering the tank with variable voltage batteries such as the Spinner 2 or, more recently, the Kangor Evod VV 1600 mah. Both the tanks and those batteries have become increasingly harder to find.
Have to say, after the Screwdriver, I was never interested in getting another device with an external battery. But as we all prepare for the (senseless) demise of the on-line vaping industry, I've been trying to quickly learn about regulated mods. I need something safe and reliable that will take an external rechargeable 18650 battery and will also fit my Nautilus tank.
I know the technology has advanced light years. Frankly, all the info out there is pretty overwhelming.
I don't need a lot of power or tons of vapor. I tend to stay between 3.2-3.4 volts with the airflow on the tank wide open. I'm most concerned about quality since buying mistakes will soon be harder to remedy. (Some of the worst products I've purchased-- with the highest price tags-- were from local vape shops.)
Any suggestions for an APV from folks who also use the larger Aspire tank?
Thanks.
Hey guys looking for a tank that will last me long. As we all know CE4's aren't the best mine died pretty quickly. Looking for a tank that will last me long, and wouldn't need replacement coils very often. Also hoping these tanks are glass so they don't break with certain juice. I was thinking the evod glass 2 or the aspire k1. Any ideas? And will these tanks fit on my battery?
Zen Pen Electronic Cigarette Kit
I'm having a mad time trying to find a tank or clearo to fit a relatively small battery to upgrade from my triton without having to go to a MOD set-up I need a nice drip-tip too.It seems like an in between of my Triton tank and a MOD I can't quite find the vapor production I'm looking for I lowered my ohms on the triton 1.8 it did produce a bit more vapor but the tanks just aren't built for those ohms and they run to hot.I've already gone through three coils.I looked at the Aspire Nautilus mini premium kit not completely sold on it, eGo One battery with Nautilus mini but I think the tank I'm looking for should hold more e-liquid.Any help here much appreciated.
Hey there!
I have been vaping for a little over a year now and have gone through several different set ups but am fairly happy with what I'm using atm-- I have one of those Aspire Sub Ohm batteries and have been using a Nautilus tank with it. It seems that the coils in the tank burn out super quickly because the battery is too strong for it I guess? Any way the other day my battery and tank (the whole shebang) fell right into the toilet. The only good thing was that the toilet was recently flushed so yeah... I am now in need of a new battery and was interested in one of those lil box mods that everyone in the world seems to be using lol. The tanks I have and would be using with it are my two Nautilus tanks (one is a mini) and sometimes an Innokin iClear thingy (the one with the cool rotating tip). I vape mostly very sweet caramel, cookie and cereal juices at .6 nic and am mostly in love with flavor versus cloud making if that makes any sense. I'm not at all good with any of the technical stuff so have no desire to use any rebuild-able stuffs. Oh and I have an Aspire vv battery but it loses the charge so quickly I am kinda wanting something new...
Any one have any great advice on a new battery for me?
Well I bought a mod and a kayfun and after about a week of fiddling and trying to get it to work its just way too much of a hassle so I am probably going to sell it to my friend that wanted a mod and kayfun anyway. Now I currently tried to upgrade from mini nautilus and vision spinner 2 to mod but I kind of want to downgrade even further since I went through 2 vision spinners and 2 mini nautlius in about a month and a half so obviously I am not happy. Im sure you all know why i hate the mini nautilus. But now i was thinking about going back to the Halo g6 starter kit that i got started with vaping. When i look back it was so hassle free, convenient, and i didnt attract attention like the bigger batteries etc which are usually frowned upon by people in the general public. I use 12mg so I was wondering to make up for the smaller battery and vapor that i should upgrade to 18mg? Yes I know im going to end up spending like another $100 for a starter kit and halo ejuice which is expensive since its $20 for 30ml and other ejuice doesnt seem to work in the g6 cartridges. I really need a 2nd opinion on what people think of this plan. The g6 should last me awhile unlike the vision and mini nautilus which id have to keep rebuying which is like $50 a month even though i buy off mtbakervapor which has much lower prices than halo even though its also prob lower quality. What do you guys think? Are mods just an addiction hobby thing that smokers actually need.
Hi all
I started vaping again after many years like a month ago. My set up atm is Aegis Solo (came with cerberus tank which leaked madly), currently using Aspire Tigon tank and I have an Innokin Zenith Pro which I haven't try yet.
Is taking me a while to figure out what kind of vaper I am, still not 100% sure tho, I know I prefer DL over MTL but not at high wattages because I believe the vapour becomes to warm for me. I like the Tigon tank but is a little to restricted for my liking, I will like more airflow.
Questions:
1 - Is DL at higher wattage always a warm/hot vapour?
2 - What suggestion for a more loose DL tank with vapour not to warm.
3 - Worst case scenario if the cerberus won't stop leaking (I do like the options of several coil compatibility) would the Zeus top airflow be a good option or others?
Any help will be greatly appreciated.
Hello, I've been using the Aerotank giant with an eVic Joyetech 1st gen battery since 5 months ago and the glass of my tank broke a few weeks ago so, I'm looking for a new tank upgrade, I've seen good reviews about the KangerTech Sub Ohm but I havn't had the time to see reviews about other thanks and this one looks pretty cool, what other tanks are out there to compete with this one? Should I get this one? I'm ordering in the next 3 hours or so, so, any advice is welcomed!
Thanks in advance vapers!