Darn Cat Hair!!

i just noticed there is like a gash on the glass part of my tank i was just wondering if i could do to fix it instead of having to go out and buy another one (so it won't leak)? like tape or w/e

it is on the outside and is not leaking ATM  

Hey guys looking for a tank that will last me long. As we all know CE4's aren't the best mine died pretty quickly. Looking for a tank that will last me long, and wouldn't need replacement coils very often. Also hoping these tanks are glass so they don't break with certain juice. I was thinking the evod glass 2 or the aspire k1. Any ideas? And will these tanks fit on my battery?

Zen Pen Electronic Cigarette Kit  

Hi! so i broke my tank glass and i need to replace it asap,the thing is the exact same glass for this tank is hard to find, is there any other compatible glasses for this tank?  

Ugh, its so annoying and burning the inside of my mouth.
I am currently using a Snow Wolf, tank and all.
And it spits every time I hit it. I have not cleaned the inside a million times, I don't over prime my coils. I don't know what else to do. Can someone HELP me please.....  

I had 2 Evod coils rebuilt as SC with Silica and 32 Kanthal that never saw more than 4v.

I got a Horrible taste in a tank and my assumption was the Silica scorched even though it's not supposed to.

I cleaned and dry fired them, the Silica looked clean but they tasted nasty all over again.

When I rebuilt them then, I saw the light scorching on the insulator, just lines burned into it from the coil legs. I washed all the scorch off and rebuilt them. Haven't used them yet, I hope they'll be ok.

[EDIT] The coils are around 2 ohm and I tested them with a multi meter when rebuilding.

Bruce in Ocala, Fl  

Hello everyone!

I have been an happy vaper now for 5 years. Like most of the old beginners I started with cartridges, blue foam, cartomizer and so on. Currently I am using Kanger tanks, T3, Evod 2, MiniProtank and Aspire ET-S BVC, with Vision Spinner VV but I am looking for an upgrade.
I am not looking for an RDA, nor big battery and definitively not sub-ohms. I'm looking more for a glass tank, adjustable airflow, large capacity, and the ability to see the liquid.
Thank you you all so much for any advice, and happy vaping!  

So I'm on the fence with my latest stint using the aspire vivi nova and mini tanks.. I break and loose them so fast I refuse to spend over $20 on a new tank. And Iv also had mixed results with the coils. I use a provari which has out survived all the tanks.. well, that's another story..

I'm wondering if the Atlantis performs better than the vivi nova tanks Iv been using.. It , with a SS tank might survive my abuse. But I seem to break the base connection more than the glass when I drop them.

Can someone enlighten me how the different Aspire tanks perform? how many different styles of coils are available now? Should consider a different system with more consistent coil performance? I'm tired of the one day aspire coils..

Thanks!  

So I've been vaping 4.5 years now. Really still a low watt tootle puffer. I probably vape 6ml or so a day now and that has been as high as maybe 10 ml a day. For about my first 3 years I vaped 50/50, for the past 1.5 years mostly 70/30. Not one cig and yes, all bad physical signs from ciggies have appeared gone for ages now. All my juice has come from very well known suppliers.

I could/should? have taken a couple pics but I think I can describe the situation adequately.

I drive a 5 door Ponitac Vibe. I got it in Jan before I started vaping in April of 2015. So yes, I did smoke in this car for about 2.5 months. Still, I've Vaped in it Daily for at least 20 min a day for 4.5 years now.

Yes, I AM probably a pig but I still haven't felt the need to clean the inside of my car windows until recently. On the drivers inside window I've noticed a clear, flaky film on my window, bad enough that it's started to actually flake off. Interesting. One important note, I had the full inside tinted the month I bought the car so the windows were essentially sterile when I started vaping inside the car.

I critiqued things carefully. The film was by far the worst on my window. Next came the window Behind me. Next came the front passenger window with the cleanest being the passengers rear window. This makes perfect sense as the car HVAC is 100% aimed at me. There Really Is Nothing Else the flaky film can be but vape residue. Arguably very similar to what has actually been going into my lungs. Again, medically, I have no known respitory issues.

My tint peeps said clean with just warm water with a few drops of Dawn dish detergent. You'll recall that Dawn is what they use to get crude oil off of birds caught in oil spills, how be it much stronger amounts of Dawn than I'm using. So I got some micro fiber and *important* water As Hot As I Could Stand, Easily 130-140F and a dribble of Dawn in about a 1/2 gal container. This again was the reco from the tint folks to not damage the tint when cleaning it.

Now comes the scary part.

VERY Hot Water, light Dawn and Heavy elbow grease with the micro fiber were Barely Able to remove the vape residue. These were WAY WORSE conditions than I EVER want inside my lungs (to clean). Honestly, it took Three Heavy go arounds to get probably 95% of the residue off. Even Worse was honestly, I don't think the Very Hot water and Dawn were effective At All against the film. (??!!) Most of the film came off from elbow grease After the window was dry from any cleaning juice. Pg and Vg are Supposed to be water soluble and Water Soluble IS what you want near your lungs. My personal experience here Does Not bear out the Totally Water Soluble point, at least not to me anyway.

This is pretty damn scary if you ask me. I enjoy vaping but this will have me switching to 3mg juice Soon in preparation for quitting. As I said, I've already been decreasing my vape amounts before this.

I am not a Dr or a Chemist but I am fairly certain of this.

What I was almost not able to remove from glass was definitely vape residue.
It is logical to assume the same deposits that were on that glass are inside my lungs. BOTH have been exposed to vaping the same amount of time.

Honestly, to me, thus means a Much Higher Chance of some serious respitory issues from long term vaping.

Bruce in Ocala, Fl  

OK so I have a Vaporesso Veco Solo Kit and my tank is stuck. I've tried rubber gloves, rubber and pliers, lock pliers and anything else you can think of. The tank won't budge. I need to change my coil but how can I get this damn tank off.

Not the best picture but you can see the tank.

UPDATE: After continuous trying with multiple methods, my glass has decided to give up and is now in 4 pieces so I need either a new glass or new vape entirely.  

I've been using disposable clearomizers since I started vaping, with an 808 kit, and that's been working fine for me, but I came across a super cheap deal recently for a Kanger Evod starter kit, so I bought one. I paid about $14, so it was a no brainer.

The tanks have these disposable coils, but the tanks seem like that they can be re-used forever, as long as they don't crack or fall on the ground and break, is that correct?

I saw that they sell a glass tank for it also, so I think that I'm going to pick one of those up, and I'll be able to vape on any juice that I please, without the fear of the tank cracking, and I'm assuming that that tank will last for a very long time.

So far I'm pretty happy with the Kanger Evod, and I like the vape from it.