So I'm on the fence with my latest stint using the aspire vivi nova and mini tanks.. I break and loose them so fast I refuse to spend over $20 on a new tank. And Iv also had mixed results with the coils. I use a provari which has out survived all the tanks.. well, that's another story..
I'm wondering if the Atlantis performs better than the vivi nova tanks Iv been using.. It , with a SS tank might survive my abuse. But I seem to break the base connection more than the glass when I drop them.
Can someone enlighten me how the different Aspire tanks perform? how many different styles of coils are available now? Should consider a different system with more consistent coil performance? I'm tired of the one day aspire coils..
Thanks!
A lot of people are always looking for cheap tanks i was just on vapor beast deal of the day they have aspire vivi nova tanks for $1.97 dont know if there any good but they are cheap enough i might pick up a couple.[h=1][/h]
Hey guys looking for a tank that will last me long. As we all know CE4's aren't the best mine died pretty quickly. Looking for a tank that will last me long, and wouldn't need replacement coils very often. Also hoping these tanks are glass so they don't break with certain juice. I was thinking the evod glass 2 or the aspire k1. Any ideas? And will these tanks fit on my battery?
Zen Pen Electronic Cigarette Kit
I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks
I have had my istick 50w for about 24 hours now. I the issue I am having is that all my 1.8ohm tanks are reading 2.0ohms on the display of the iStick. This is the case for my Aspire ET-S and Nautilus Minis. On two occasions the Nautilus tanks have read 1.9. Never 1.8. Even with brand new coils. I get the same result on 4 Nautilus Minis and 3 ET-S tanks. I get the same results with the mod turned off when I screw on the tanks as I do with the mod turned on. Any ideas or suggestions?
I'm so tired of the recent "mesh only" craze. I just don't understand it at all.
I have used roundwire sub tanks for close to 4 years, and can generally get a pretty accurate flavour representation from my juices. Obviously some are better than others, but the og Uwell Crown coils and .4 Cleito coils are pretty stellar.
Recently decided to mix it up and try something new, so i went on the hunt for a new sub tank, only for the market to be completely littered with mesh-only tanks. The only tanks i could find that still use roundwire are from years ago.
I figured i had been missing something, so i picked up a collection of mesh sub tanks, only to be dissapointed by every one of them.
The list was:
Ehpro Raptor with both the raptor coils and the Horizontech Falcon coils.
Innokin isub B.
Aspire Odan Evo.
Aspire Cleito Pro.
Geekvape Zeus.
I got absolutely zero of the liquid nuance that i get from 3+ year old roundwire coils. I just get a blast of full-on "all the flavours at once", and for juices with sweetener, that is the primary profile. Interestingly, i found that with fruit flavours, it was a little more palatable, but since i primarily vape bakerys this wasnt all that much use.
I figured i would give the mesh rta's and rda's a shot, as everyone is raving about them, so i picked up:
Wotofo Profile RDA.
Wotofo Profile Unity RTA.
VandyVape Mesh RTA.
Tried all of them, same dissapointing experience. They were basically mesh sub tanks in RTA form. Literally exactly the same "flavour".
So, after wasting a chunk of money on all of these, im back to using the Cleito Pro with the 0.4ohm Cleito coils and the Uwell Crown Mini with the og Uwell Crown coils with the occasional use of the Wake Mod co RTA when i can be bothered to rebuild.
Is it just me? I dont understand the hype in any way. Maybe it's just my particular flavour profile doesn't work great with mesh, or maybe its just me, i dunno. It's just a shame to see that any recent sub tanks that come out are all mesh, apart from the very occasional sprinkling of roundwire thrown in here and there.
Anyone else have a similar experience? And have any recommendations on recent sub tanks to try that aren't just mesh?
I currently use a Nautilus for work or driving and I break out the rdas for kicking back or having fun. Well my friends, it's upgrade time. Too many tanks and my head is spinning. I'm a fan of Aspire but the Subtank Plus has my interest. I would love to hear what everyone thinks, especially pros and cons from owners of said tanks. Advance thanks.
Hey guys, I currently use a lot of different hardware. Some of my favourites are the Aspire Atlantis Mega paired with the CF MAXX battery, and the Kanger Subtank Mini paired with the eleaf-istick 4400mah 50w.
Was wondering, if I wanted to go a step above, what should I try next, for a new setup? I really enjoy using sub ohm atomizer tanks but I usually use around 1.0 ohm coils, that's just what I prefer. Battery life is extremely important to me. I'd prefer something that is 3000mah or higher. I also don't really like Innokin.
Let me know!
Hey there!
I have been vaping for a little over a year now and have gone through several different set ups but am fairly happy with what I'm using atm-- I have one of those Aspire Sub Ohm batteries and have been using a Nautilus tank with it. It seems that the coils in the tank burn out super quickly because the battery is too strong for it I guess? Any way the other day my battery and tank (the whole shebang) fell right into the toilet. The only good thing was that the toilet was recently flushed so yeah... I am now in need of a new battery and was interested in one of those lil box mods that everyone in the world seems to be using lol. The tanks I have and would be using with it are my two Nautilus tanks (one is a mini) and sometimes an Innokin iClear thingy (the one with the cool rotating tip). I vape mostly very sweet caramel, cookie and cereal juices at .6 nic and am mostly in love with flavor versus cloud making if that makes any sense. I'm not at all good with any of the technical stuff so have no desire to use any rebuild-able stuffs. Oh and I have an Aspire vv battery but it loses the charge so quickly I am kinda wanting something new...
Any one have any great advice on a new battery for me?
I have an Eleaf iStick 30 & use the Aspire Nautilus mini with it. I bought a Melo tank to try sub ohm vaping, but don't like it (Melo coil) at .5 ohm. I do, however, really like it when I slightly unscrew it & get a 1.2 ohm reading for it.
I'd like to try the new Atlantis V2 1.0 ohm for my Melo tank. Why does Aspire list the power requirements for the 1.0 ohm coil at 40-50 w? I'm assuming they mixed up the specs for the .5 ohm and 1.0 ohm. Is this correct?
So after a little over 2 months of sub-ohming with Kanger exclusively (mini and nano), I think I'm gonna get a first version Aspire on Friday. Not because I'm tired of Kanger, quite the opposite actually I'm really satisfied. But, I don't wanna get into the real high wattage cloud contests necessarily, I want to keep good flavor and it seems like the 2 biggest tanks in the sub ohm market are the Kanger subtanks and the Aspire Atlantis. So I found one used for 20 bucks, I figured I'd give it a try. What kind of differences between it and the Kangers should I expect? I know some people think they have better flavor. They use different ohm level coils as well right? What kind of wattage do you run one at?