Ohms Jumping On Sigelei 150w?

Everything on atties is secure.. tried several different atomizers & having same issue. Even put a iclear 30 on there & same thing is happening. Help? :/ this is very frustrating  


Similar Content



Sigelei 150w And Derringer Ohm Jumping Issue.

OK so I have received my new mod. I've been using the derringer for quite so time and never noticed any inconsistency on any other device. But this is the only device I own that reads ohms. I chain vape like a champ and the derringer does get hot when I jump on the train. Once it heats up the ohms jump around erracticly. So I added a keppler heat sink to the derringer and poof problem solved. My questions are has anyone had this happen to them. Is the heat making the ohms jump around? Or is there some issue of contact with the positive pin? Or do I just have a faulty mod? Please share experienxes . Thanks gang.  

Sigelei 150w Is A Beast!

If anyone is on the fence about buying a Sigelei 150w... BUY IT.

This thing has been great so far. Absolutely no problems and I like it much much much better than my Hana Modz DNA 40. For $110, it's as good or better. All the problems other people have had with this thing, I have experienced none of them. I was vaping for four days with a .2 ohm build on the Doge v2 running between 60w-80w and it still had 50% battery life. The performance is ridiculous, especially for it's price tag. I'm so happy I didn't waste money by over paying for a VaporShark or Vapor Flask. Just because something is more expensive, it doesn't mean that it is better...  

No...it Has Finally Happened

then....it finally happened /: i lost my Sigelei 150W with my Royal Hunter i had just purchased recently. It hurts. The first thing that goes through my mind when i wake up, how could i be so stupid..

Anyways. Life continues, with or without it.

Now what is a Box Mod that compares to the Sigelei 150W where i can adjust it by wattage that'll perform as good and last as long. I use RDA's & Tanks of all kinds on it and need something that ill enjoy everyday. Must be my go to, when i dont feel like using my mechanicals.  

Do Atomizers "wear Out"?

I have a CLT v2 Plus and a Mutation X v2 running on a Sigelei 150w and an Asmodus Klone v1.5. I am a cloud chaser, just to get that out of the way. Both attys on both mods used to CHUCK the clouds like nobodys business. My builds have not changed, if anything I have gotten much better at it obviously with time and practice. But boths attys on both mods just don't do what they used to. Neither performs in a way that is something to be "ashamed" of, if you will. But they don't do near what I used to get out of them. Maybe it's the batteries? I have 10 18650 batteries, all have been in even rotation for a while now. Although I would think it wouldn't be such a big deal in the Sigelei, it being regulated and all, right? Or maybe I just suck and don't know it? I am not against getting new atomizers, as I love throwing away hard earned money on vape gear I don't really need as much as the next ECF member, but still. Thoughts?  

Sigelei 100w Ohm Reader Constantly Jumping?

Hey guys! i've been having a huge problem with my sigelei 100w ohm reader just jumping all over the place when i vape. it changes every few pushes and varies anywhere from .5 to 1.2 which is really obnoxious because when you dont notice it change you almost always get a dry hit. what do i do?  

Sigelei 150w Thread Or Discussion?

I feel liked I looked everywhere on this forum I can't find a sigelei 150w thread or discussion or anything. Can any one point me in the right direction?  

Decisions, Decisions...

so i have been asked a few times what i want for my upcoming birthday. at first i was going to go with the zombie splatter flawless tugboat mech mod/rda combo, BUT flawless decided to have a 50% off sale on Monday so i got it myself

i have been wanting to get a nice box mod for quite some time, but cant really decide on one. my main thing is i'm looking to get a dual 18650 device, for longevity.

right now i'm bouncing back and forth between the iPV4 and the Sigelei 150w. i am also open to using an unregulated box mod, although i don't have much knowledge of those - specifically the difference between parallel and series.

on one hand i like the idea of having the ability to run temperature control, although i don't know how much i would really use it. i also like the aesthetic look of the sigelei 150w.

who owns one of, or both, of these devices? which do you prefer? what box mod would you suggest instead of these?

price range, below $200 is ideal.

cheers!  

Can A Certain Build Make You Cough?

Hey all, I've been vaping for 3 months. I DIY and I have been using the same flavors, vg, pg and nicotine and I have never had a problem. But the last few days I have been getting a tight chest and it hurts and makes me cough when I inhale? At first I thought it was the custard, but it is happening with fruits too. So I am wondering if my current build in my RDA could be the problem? It's a simple single coil build 10 wraps for 1.5 ohms and I usually run it at 4.7volts. Couls someone give me some insight into this? is it possible my build has a short that I am not aware of? ohms are not jumping and it heats evenly. So I don't know.

Please help! Ive invest a lot of money into vaping and I dont want to stop.  

Big Discount On Sigelei 150w

Just seen this on GearBest

If you use discount code Sigelei150WCY you can get the 150w for $88.99 with free shipping too.
http://www.gearbest.com/electronic-cigarettes/pp_143761.html

 

Battery Reading Fluctuates

Okay so I did look this up and it appears that other people have mentioned this specifically with sigelei mods but I didn't see any that were more recent. I look at my mod to see what my batteries charge looks like to see if I need to go ahead and change batteries and I swear to God the thing starts jumping around as though the batteries are charging themselves and then going back to the 40%. Apparently that's a problem that the mods have and isn't something to be concerned about but it freaked me the heck out. They're doing just fine now that they're in their external charger thingy but I just want to make sure that that's not a sign of something going wrong with the batteries that it's just my mod being weird I've checked the connections and everything to make sure it was clean and that the batteries were fine and not dented or unwrapped and everything looks good. I just need some assurance that the batteries were not like failing or that a regulated mod would shut itself off if batteries were jumping around like crazy in reality if that's even possible
For clarification it was doing this when I was not firing it