Any Update On Altantis Coils??

There's been some local talk in the vape lounges (AKA B&M) about Atlantis coils being made 100% organic cotton. Has anyone heard or found any truth to this yet??  


Similar Content



Atlantis Cotton Heads?

ever since the discussion about the potential risk of using atlantis stock heads, there was talk of convincing Aspire to use cotton instead. has anyone heard any developments on this topic?

i myself only use rebuildables, but my brother does not and i bought him an atlantis for xmas, before i had found out about the potential health risks. told him not to buy any replacement heads until the cotton ones come out. but WILL the cotton ones come out? i tend to think so, so they could compete with Kanger.

i know a lot of people sent messages to aspire but can no longer find that discussion, so here goes. anyone heard anything?  

Vapeonly Atlantis Ni200 Coils...

I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks  

Why Do Cotton Based Coils Hate Me?

I can only get about a 1-2 day life span out of coils that are organic cotton based. After 1-2 days, they start seeping a dark colored liquid into my tank and ruining the juice. This has happened in my Atlantis tank running Melo coils vaping at 32 watts and my Herakles tank running 55 watts. Keep in mind I vape about 7-10ml a day. Juices are 70VG/30PG or 80VG/20PG all at 3mg nic.

On the flip side, if I vape old school Atlantis coils at 32 watts on the same juices, I get a full week before this happens.

Any ideas on how to make cotton coils last longer?! For this reason, I can't wait to get my Lemo 2 in. I'll be able to rewick daily and not worry about cost.

The way things are going, I am losing so much money on coils it's nuts. See picture to see whats happening.

Oh yeah, this is happening on all kinds of juices I vape. Mt Baker Vapor, Vista Vapors, 4 Pillars, The Milk Man. Some are budget juices - others are premium. No matter what juice I use, it happens.

The BIGGEST killer is Zeus Juice with 80%PG, 20%VG. This juice kills a coil in one tank full. I'm guessing the sweeteners in that juice do it.

It's frustrating because I LOVE my Herakles tank running at 55W but if I have to replace the coil every 1-2 days, that's SO expensive.  

How Tell If Your Coils Are Duds?

Hi all,

I've recently decided to buy a Kanger Subtank Mini to test the waters out and see how it compares to the Aspire Atlantis. Unfortunately, my coils are only lasting me 6 hours at the most before the cotton is charred black and everything tastes burnt. I've heard about coils that are coming back as duds. What is a good way to tell if the coils I've bought are duds?

Thanks in advance!  

Confused On Kanger Coils

Ok so I know that kanger subtank .5 ohm coils are good for up to like fifty watts and the subtank 1.2 coils are good for up to 26 watts, my question is this kanger has released vocc coils pretty much the same coils they have for the aero tank , genitank ,etc except now they have organic cotton like the subtank coils. Is it safe to think that the 1,2 and 1.5 ohm vocc coils will be safe as the 1.2 and 1.5 subtank coils at the 26 or so watt range, if not how many watts are safe so I don't burn them to hell  

Can You Use Atlantis V2 Coils With Old Atlantis?

does anyone know If you can put the new atlantis v2 coils in the first atlantis?

and also if you can put atlantis v2 coils in the horizon tech arctic tank?  

What Coils And Battery To Use??

I bought a Kanger Subtank and Atlantis V2, but sold them because they just weren't wicking my 100% VG liquid (Velvet Cloud & Gypsy eJuice) well at all. I tried using the atlantis with the .3 ohm coil installed at 70-80W, which was the stated operating range, and found it to be EXTREMELY hot. So hot that the tank quickly heated up to the point of almost burning my lips. The Kanger just burned the wick up at 20W+ with the .5 ohm coil, despite letting it sit filled for a few minutes and priming.

I am very interested in picking up a Royal Hunter, although I've no idea what pre-made coils (i dont want to make my own coils, just dont have the knowledge or time to learn how) and battery to get. VaporDNA sells UD pre-made coils in various resistances, but figuring out what resistance to use, and thus what wattage battery to get is where I am stuck. Not sure if it'd be better to run at lower ohms / higher wattages, or higher ohms / lower wattages. I'm not sure if it's possible to get massive clouds, but a cooler vape at the same time, but that's my aim.  

Atlantis V2 Vs. Subtank Mini

Hey guys I'm looking to upgrade from what I have right now which is the atlantis v1. I'm not a huge fan of the atlantis because of the inconsistency with the coils and the loss of flavor after 2 tank full. The atlantis v2 seems nicer with the occ coils and improved airflow, but I'm not sure if its worth the upgrade since I could just get the new 5-pack occ coils for my v1. The subtank mini still has better options with the occ coils and RBA. Also it seems the occ coils for the subtank is easier to rewick which could save me a few dollars.
I'm not sure which one to go with. I'm leaning more toward the subtank, but still not sure. Maybe someone who has either one or knows more about them could help me. I like to have a good amount of clouds while still keeping the flavor.

Or if anyone has a sub-ohm tank they could recommend that they like more than the ones I mentioned that would be good too.

I use an ipv2

Thanks  

Always A Burnt Taste

Hey all.

So I've been vaping since January. I started out on a kanger ego and an aspire k1. Since then I've gone through aspire cf batteries, and finally made my way to my current set up. An mvp 3.0 or istick50w with my subtank mini.

At first using the stock occ coils with the subtank, I decided to buy some wire and cotton and here I am. Been building my own coils using the RBA section and loving it. I wick it properly and never get a dry hit, going anywhere from 18-25 watts, which is my preferred settings.

Now, it's only my preferred settings because I can't seem to go any higher. On either device. I get dry hits like crazy despite pancake wicking which I've specifically done to prevent said dry hits. I always have heard that it can possibly taste better the hotter it gets. And I don't mind a hot vape. But it won't let me try!

I'm well saturated, well wicked, and my juice can be anywhere form 50/50 to 70/30pg. I can do quick pulls on fully open, and slower toots on the middle setting on the subtank. I just can't go any higher than 25watts and I don't know why!


And that's not for just the coils I built. It's for the stock occ .5 ohm coil as well. And like I said all my cotton is beyond well saturated. Any help?  

Destroying Atlantis Coils, What Am I Doing Wrong?

To keep it short, my coils are lasting a day on average. I vape a 12mg store bought Skittles flavor and occasionally mix it with 18mg Menthol juice between 25-30 watts. The coils taste burnt and get clogged with some black crud. I'm priming the coils with juice, doing the dry hits that's recommended, essentially everything by the book but I can't get any decent lifespan out of these coils. Any insight would be greatly appreciated!