Coil Master

Want a fantastic drip tips!
This is not an advertisement, I want to share with all my heart. I ordered from the Master and taught two excellent drip tips. With this message I just want to support the brilliant master !! Fantastic magic stone right at your place!



My tremendous AlexSam
I want to give you a superb master.
[продам] Дриптипы «Самара разнокаменная»  

It's often been said to test a new coil build on a regulated mod before using it in a mech mod. Just for fun, I tested a new build on multiple platforms to see how consistent they a

These are AVS stainless steel premade quad core clapton 30x4/40 3.5 7/6
Two coils in a Dead Rabbit V2 RDA

Coil Master Tester 0.17
Uwell Crown mod 0.19
Wismec mod 0.18
Geek Vape Aegis 0.18
Vapresso Luxe 0.18

Closer than I would have thought!

Incidentally, the old coils were in there for 8 months, although this unit is in rotation, so maybe a months worth of actual use.

Also, the top cap was just about impossible to remove from the tube. I had to insert a chap stick into it and slam it on the desk for it to come off.  

This is the 521 mini V2 that will meter or fire a coil. There's a 3-way switch, with off in the middle.
I was sure that it was turned off, but in handling the kit bag, the switch must have been pushed and turned on. Even with no atty on the tester, it completely drained an 18650 battery.

This was confirmed on a multi-meter. 0 volts.
I know that this battery is done, but it's interesting that my charger completely ignored it.

Based on this, I'd recommend not storing the tester with a battery in it. It probably already says that in the instructions. Maybe there's one person out there that didn't know this already, so here it is.  

I'm having trouble with my Jem Pen E cig - hopefully someone can help me.

I take the coil out clean the tank and battery area, put it back in with liquid + prime the coil. for about 5 minutes it tastes fine and is vaping as normal. then a really horrible burnt taste comes in which is unbearable to smoke and making my throat hurt.

I take the coil out and clean again, put more liquid. the same thing happens! it tastes absolutely fine again and then gets burnt.
any idea why this is happening ? the device gets quite hot too...
i don't think the coil is the issue because why does it taste fine for a few mins?
I've ordered new coils so going to try that but worried its the device. i've only had it for 2 weeks and changed the coil about 5 days ago.  

Hi all,

I'm coming off a 2 pack a day smoking habit and have been vaping for about 3 weeks now.

I purchased the Caliburn G as this device seems like one of the best for nicotine salts.

They said nicotine salts is the best way to get off smoking and its helped a lot so far.

I'm on 30ml nic salts per 100ml bottle and I've got my smoking down to 3-6 cigs a day.

My question pertains to coil life.

If I chain vape, will this affect coil life ? And to what degree will it affect it ?

I've had to change the coil every 5-6 days so far, but from what I've researched, it is because of my chain vaping habit.

Can the coil last about 8-10 days if I don't chain vape, or is this pushing it ?

Also, is it normal for the liquid in the pod to become a dark brown / black colour after a few days ?

Thanks,

Andy  

Hi, despite all the info on the internet these days, I ve been unable to find an answer to what is the life use of a wire on a rta coil (not the cotton or liquids) before it gets exhausted and become a bad element to health, maybe to the point of releasing metal particles that could go into the lungs... I know this is highly relative and depends on what kind of wire, liquids and vaping frecuency, but if I give you a straight case, maybe I ll make a good relation between other materials and their durability. It happened that during 2020, with the pandemic on full first impact, importations were very slow and in some cases, closed for long periods of time, I was trying to get some imported wires but I didn't have enough luck to find those I needed, just very thin wire for mtl equipment, which I didn't have. All was sold out from vaping websites... I ve managed to get a Zeus X rta and with it, the included premade coils (I think these are Nichrome)... Thing is, I used the same (and only) metal coil for almost 6 months, obviously replacing the cotton when needed (I had all the other materials, bags of cotton Bacon, tools, fresh liquids, etc), the liquid I ve been using is Don Juan sweet tobbaco and reserve, from King Crest. In those six moths I didn't vape all days or weeks, since finding or importing liquids were also a problem, so confinement and the lack of products, push me to smoke again, sadly, but I didn't give up and I start to build again the coil meanwhile the purchases arrive from other countries. The metal coil doesn't seems to be exhaust in plain view, it gets datk or black, as normally should be after several days of use and when tasting a bit burnt, but once I clean up with a brush, water and some short dry burning when building again, it gets back its grey metal color, not the same shine as a new one, but close. My vaping frequency was sometimes in chain, due to anxiety, but not all day or days and I was careful to rebuilt often. Mods are one Aegis X and one Smok P3, wattage I use is between 40 and 60 because even if the coils can be auto detected and suggestion is 75w, this is always overrated and burning taste triggers in 3 days. Only thing I did notice was sort of a metal taste for a period of time, that after went away and never got back. If someone wants to drop an answer, be welcome please, thank you all...  

For the past few days I've been waiting for my replacement coil to arrive (finally arrived today) and I noticed a pattern of mouth ulcers whenever I don't have nicotine for a period of time.

Anyone else experience this?  

Hello,
Does anyone know why with the original Subtank mini the coils that came with it were
a .05 ohm coil and a 1.2 ohm coil i have noticed with the new subtank it comes with a .05 ohm coil and instead of the 1.2 ohm coil it comes with a 1.5 ohm coil
does anyone know the reason for this
thank you  

I've got a Nautilus with a 1.6ohm coil, and an iStick 50w. On the side of the coil it says 3.2v-5v, and I want to know if that's just a guideline or a limit for the coil.

I'm running it at 4.8 volts, but I get better flavor and vapor at 5.5 volts. There are no wicking issues or burnt taste at 5.5v, but I don't want to damage the battery or the coil. Any advise would be great thanks!  

I'm finding a 1.3 ohm coil to be to low for me. On my Provari, between 2.9 and 3.5 volts are OK. I haven't used this tank on either of my other two variable wattage regs, but I'd think it to be in the 6 - 7 watt range. It's time to re-wick the other tank or quit typing and do it already. I think I'd go for the former, but then I'd have to think about that. The other tank's coil I wrapped to about 1.7 ohms. My mech and me would be ever so gladder if that tank was fully operational again.