Cloupor Mini 30 Watt Question About Vw/vv

Hey guys if i was to use the cloupor mini 30 watt regulated device with an efest imr 18650 35a
battery am i safe? will the cloupor see any overheating of the battery if it were to happen? or will it see if the ohms are too low? the lowest ohms i plan on using is .8 possibly .6 but i just wanted to know how safe is this device? also i am aware of the recall on this i will be doing the "too hot" test on it. thanks for your replys!  

hey guys i just ordered a cloupor mini 30 watt i heard all the gossip about it and now im a little bit concerned....also i heard of many people having them and working like a charm what are your thoughts? do you think the ones recently ordered are going to be fine?  

Right now I have a cloupor mini and a magma and a subtank. But I'm ready to upgrade. I want to push the ohms lower and the watts up. My mini only goes to 30w but I'm looking to vape maybe 50 watts plus. So I'm thinking around a 70 or 75 watt mod and idk about a new topper. I'm thinking maybe a lemo and some kind of a new dripper. Maybe a plume veil or mutation x. Anyone have any recommendations. Btw I am on a budget.  

I have spent nothing on vaping in the last 7 months but now I am thinking about buyin a spare to spare for my Vamo 5 (to keep one at home and one at work). I am very satisfied with my Vamo – it worked perfectly for 8 months. I use it with 18360 battery, so it is not too long, fits perfectly in hand and after continuous use for 8 months it is still as good as a new one. But I do know it will go bad sooner or later, I have to be prepared. I was thinking about buying just another Vamo (may be Vamo 7), but then wondered if I would like to try a box mod. What if I would like it? And if not, I do need one more spare anyway.

So far I am thinking about Cloupor Mini 30W.
Authentic Cloupor Mini 30W Variable Wattage / Voltage VW VV APV Box Mod

Would you recommend it? Is it comfortable enough? Is it too small (to fit in hand)? Comfort and reasonable longevity are the most important thing for me. For example, I have found in Cloupor description “Magnet back cover, no need to use screwdriver, more”. It is very important for me; I could not imagine myself walking around with a screwdriver in case I have to replace a battery. What other mods (if any) should I consider? I do not need more than 30W, please do not advise me on more powerful mods unless they have some extremely useful features beyond their power. And I do not want to spend more money than necessary for a spare.

But maybe I will be still buying a new Vamo 7. Do somebody have hands on experience with this one?  

I'm about to buy one nd stuck on which one to get need help deciding thanks  

Hello Been vaping about 2 years now
My setups are Vaporshark Rdna 30 Istick 30 watt and a provari 2.5 and a IPv mini v2 30 watt
So like many others I have been juggling with wattage I currently Use A couple of kanger subtank minis using the RBA and a kayfun v4 I've been all over the place building ohms but have settled on 1.2 - 1.4 ohms BTW I'm not into sub ohms
So after many months of different ohms and watts with the help of steam engine I have found I like my vape at a heat flux of around 175 so to get to this and I can't believe how simple it was I just take the ohms I am using such as 1.2 @ 12 watts = 178 heat flux 1.3 @ 13 watts = 178 heat flux and so on I can't believe it became that simple
So I suppose all it takes is to find what heat flux you enjoy and adjust from there
I never bought that what I have read thru the last 2 years that 14 watts is 14 watts no matter what ohms you use it seems to me there had to be more factors involved
Just my thoughts


Sent from my iPhone using Tapatalk  

Looking for a new inexpensive mod, currently trying to decide between Cloupor Mini or Sigelei Mini. Thoughts or other ideas?  

Hi all first off like to say thanx to everyone who answers my newbie question. You guys been alot of help. My vapeing knowledge is improving. Now I have another one for you guys . I am looking to get the most flavor out of my vapes. I own a ipv4 a mutilation x v4 a tugboat and kanger submini and a eleaf 50 watt. I have 26g kanthal 24g kantal . What is any should I get for more flavor . What kinda build should I do ? How many wraps? Please give me a full Break down on the way to get best flavor possible . Juice with more vg I am so new and lost thanx in advance  

As above GearBeast has both for a similar price.

Which should i order?  

okay so don't laugh but this is really an amazing vaping experience/setup for me! I have two batteries and a dual 18650 charger, so I never have to charge onboard nor do I find myself with no power since I always have at least one charging. I love the simplicity of the cloupor mini 30w. Between the magnetic battery door, simplistic screen/button setup, and the overall minuscule appearance of it, I think she's beautiful! The arctic tank however, I've had a could problems, but not too bad (Yes, I did allow my atomizer head to soak for a full 24 hours in juice.) Before I get into that tanks problems though, I'd like to also include that I've been getting into dripping aswell. I bought a plume veil clone a while ago for around 30$, and i was dumb enough to think that there was no need for a VV mod over $15... therefore I bought an X6 battery (cringe, I know..) and long story short I had a terrible experience. the wire that came with the rda was iffy, and it also came with silica wick; which I hate. I ended up building some kinda ****ed up maelstrom of a build. I used the cotton ends of ear cleaners, the questionable wire that came with the atty, and I ran it all at a mind melting 4.4v. Best part of it is that I had no way to check how many ohms I was pushin out. Anyways, I digress. First problem with the Arctic sub ohm tank was the "Check atomizer" deal on my cloupor. The problem was that the connector pin for the mini 30w isn't spring loaded, so I had to whip out the mini screw driver and adjust it. Once that was fixed, the atty was working perfectly!! Except, I was getting a little burnt taste. That's when I've learned that with this tank you have to start at a low wattage and work up to 30 when you're starting vaping for that session. The airflow is good, but I hate airflow; so it's even more splendid that the lowest airflow setting is barely any air at all. Really. It feels like sucking through a brick, and I like it. A ton of flavor, I vape eucalyptus mint flavored juice right now, and I'm loving it. I can't even express to you guys how much I'm loving this thing! Thanks for the advice in telling me to get it!