Pg Vs Vg = What Ohms For Which In A Kanger Evod Tank

I've been using disposable clearomizers since I started vaping, with an 808 kit, and that's been working fine for me, but I came across a super cheap deal recently for a Kanger Evod starter kit, so I bought one. I paid about $14, so it was a no brainer.

The tanks have these disposable coils, but the tanks seem like that they can be re-used forever, as long as they don't crack or fall on the ground and break, is that correct?

I saw that they sell a glass tank for it also, so I think that I'm going to pick one of those up, and I'll be able to vape on any juice that I please, without the fear of the tank cracking, and I'm assuming that that tank will last for a very long time.

So far I'm pretty happy with the Kanger Evod, and I like the vape from it.  

Hello all!
My question is this. I have upgraded every step of the way. Started with a cigalike, moved to a kanger evod, to a vision spinner 2 with dual coils, and now I am at the joy tech ego one.
I really love the ego one and thought that would be it for me. Done.( Lol.
I have said this for each one of the above steps.)
I see so many people with box mods now. I don't mean to be offensive but, I simply am not crazy about the way they look. I have been certain… That I will not move up to that. Especially with size being such a big issue for me.
But ..
I see this new Kanger sub box mini as it looks really neat. I love the look, but even more.. the size.
So going from My ego one… to a box mod. ..
Yes.. I am aware that I will be able to do variable voltage. Different tank, etc.
I don't sub ohm. Don't like it. Tried the .5 coil on the Joytech and its not for me.
So would I really get a much better experience with my favorite juices with the kanger sub box mini than from my Joytech ego one?..
Many thx  

Hi,

I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.

I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.

I am not interested in a big old MOD or anything. I like the pen-like style.

I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.

Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.

Anyway, thanks for any input on this!  

So i had mvp 20w, and the kanger subtank worked fine with 1.2ohm occ at 11-12w.

Just put it on the mvp 3.0 and does not fire. Does not detect ohm ( blinks like this "-.-")

what gives? I tried with kanger pro tank 1.8ohm coil and it works great.  

I bought a Kanger Subtank and Atlantis V2, but sold them because they just weren't wicking my 100% VG liquid (Velvet Cloud & Gypsy eJuice) well at all. I tried using the atlantis with the .3 ohm coil installed at 70-80W, which was the stated operating range, and found it to be EXTREMELY hot. So hot that the tank quickly heated up to the point of almost burning my lips. The Kanger just burned the wick up at 20W+ with the .5 ohm coil, despite letting it sit filled for a few minutes and priming.

I am very interested in picking up a Royal Hunter, although I've no idea what pre-made coils (i dont want to make my own coils, just dont have the knowledge or time to learn how) and battery to get. VaporDNA sells UD pre-made coils in various resistances, but figuring out what resistance to use, and thus what wattage battery to get is where I am stuck. Not sure if it'd be better to run at lower ohms / higher wattages, or higher ohms / lower wattages. I'm not sure if it's possible to get massive clouds, but a cooler vape at the same time, but that's my aim.  

I just Started rebuilding my kanger dual coils and im having a issue , seems like when i build them and check my ohms on my meter they are right where i want them but when i put them in my tank and fire them up the ohms fluxuate like crazy from low to high ohms, any idea why it happens ? It occurs even when i build single coils. Anyway to fix this? Thanks  

I'm almost two years into vaping and it has been great.

I've been using a VW Ehuge 35 watt 26650 mod with a Kanger Subtank. Its huge and heavy but the battery lasts a long time. Also been using an Innokin Coolfire 2 with a Gladius tank.

Figured it was time to upgrade. Been watching several review videos to see whats out there. A lot of new sub ohm tanks and they all seem pretty good.

I've never had a box mod and figured it was time. Bought a Cloupor T6 recently to put my Subtank on. The T6 is supposed to be a 100 watt device. The Kanger coil only goes to 30 watts so no big deal there.

I really like the T6. Pretty small for a 26650 mod. Surface is slippery though, need to get a wrap for it. Butons are nice any clicky. The battery cover has magnets which is nice, no screw driver needed. Feels solid and the internals are clean. Its thick and the 25mm Subtank fits nicely on it.

Recently after watching some videos, I came across a new kinda unknown Sub Ohm Clearo. Its the Freemax Starre Sub Ohm. .5ohm or .25ohm coils. Mine came with the .5ohm. The .5ohm is rated 20-60 watts and the .25ohm is rated 20-100 watts. Reviewers were all impressed with the vapor and taste of this device. So I ordered one.

Wow, OMG, this Freemax Starre rocks. Blows away my Kanger Sub Tank in vapor production and flavor. Holds 5ml and the air holes are huge. Surgical Stainless Steel and Surgical Cotton used in the coil. Amazing.

After some more research, I discovered the Cloupor T6 really doesn't put out 100 watts. Well, that makes sense as its only a single battery device.

So went to the local vape shop today and bought a Sigelei 150 watt to put the Freemax Starre on. Will order some .25ohm coils soon.

Lovin the Sigelei so far. Magnets on battery cover, comes with a silicone gel case, nice clicky buttons, takes 2 18650. Its taller and wider than the T6 but not as thick. One thing it lacks that the T6 has is a USB charging port.

The Freemax Starre fits perfectly on it. The Kanger Sub Tank is wider than the Sigelei but fits perfect on the T6.

Really enjoying both of these box mods.

A few pics
 

Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.

Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?

I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!

1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!

Thanks in advance for taking the time to reply to this post and your patience!

Cheers!

Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?  

Ok so I know that kanger subtank .5 ohm coils are good for up to like fifty watts and the subtank 1.2 coils are good for up to 26 watts, my question is this kanger has released vocc coils pretty much the same coils they have for the aero tank , genitank ,etc except now they have organic cotton like the subtank coils. Is it safe to think that the 1,2 and 1.5 ohm vocc coils will be safe as the 1.2 and 1.5 subtank coils at the 26 or so watt range, if not how many watts are safe so I don't burn them to hell  

I am new to the mod world and I entered the foray with an IStick 30 and a Kanger Subtank Mini. When I use an old cheapo tank that came off an earlier Ego my juice taste fine. It's a 2.7 ohm coil set at 7.5 watts at 4.5 volts.The problem is the taste with my Kanger hooked up. It is very harsh. I also do not get the same visible exhaust (sorry, but I can't think of another term ) I operate it at about the same watts. I have tried both a sub ohm coil and a 1.2 ohm coil. I have also tried different air intake settings. One thing to note: The cheapo tank gives me a much tighter draw (It's harder to draw in the air). I have adjusted the Kanger down to the smallest inlet and the resistance still seems very easy.

Would the difference in resistance of the coils affect the taste with running the same power. Do some juices just not taste good with different tanks? I must be doing something wrong. Maybe I assembled it wrong by leaving out something but for the life of me I can't see what? I did insert a little piece of cotton in one of the coils which was foreign to me.

Any ideas? Fire away and don't assume anything. Again, I am ignorant with these mods so I am learning here. Thanks a bunch