I have had a kanger protank 3 for a year and a half now with a itaste vv battery, i need a new updated Ecig now.
I am willing to spend around £30 (no more than £35) and would need a battery and a tank.
I want the best flavor and vapor production for the money. I also want it to be reliable as the kanger protank 3 leaked a lot in my time and sometimes would randomly stop working.
Thanks guys!
Just sat down this morning and had a quick look at where all my money's been going for the past few months.
Previously, I had smoking down to ~5 a day. Used to get them all from abroad, so roughly £5 for 20 at most. 40/week so £10/week and £520 in a year.
My current ecig spend:
£30 for first ecig
£25 for a Vision Spinner Battery
£15 for replacement tanks
£40 replacement coils (standard coils, then unicoils)
£100+ - Totally Wicked liquids
£50 - iStick
£25 - Subtank mini
£70 - mixing kit and concentrates
£50 - e-sheesha + cartomisers
£50 - premium liquids
£455+ (and that's just about 6 months, started in October)
I know that most if it was invested in the kit, and now that I have my ideal setup I hopefully won't be making those expensive purchases anymore on tanks and batteries. The DIY kit has enough to keep me going, now it's just buying concentrates that I need for recipes. I would have saved a lot more if I'd got the quality kit early on, but at the time I was new to it and wasn't sure if it's something I'd pursue.
It's probably not even that much in comparison what others spend, but I still feel like I've spent way more money than I should have.
Anyone in the same boat?
My mother in law just came home with a new Ecig. She is fairly old, yet insists, no matter how how many people tell her, that Cigarette sized ecigs are NOT economical in the long run. Don't even try to make suggestions, she's really stubborn.
Anyways, she's been off of Cigarettes for a while, and has been using an EGO/Stardust combination for almost 2 years. She said her battery wasn't holding a charge, and decided to pickup a new ecig. She bought something called a Mistic brand ecig...but it has a tank on the end of it. The whole unit is about the size of a normal cigalike. However, the end is a mini tank system. I tried it, and little vapor comes out of it.. which she says is fine. I will say, the products looks nice.
It seems it has a very small battery in it with a smaller than a mini protank II style general configuration for the atomizer. I doubt the thing holds a mil, and I doubt the battery is over 100MaH. The unit screws off the battery, and then the coil and wick unscrews out of the tank. It reveals a setup similar to a mini protank, where the chimney goes into the coil. The coil is TINY. I tried peeking down to see if I can see the coils, but I couldn't. I can't find any sort of specs about the product, type of connector (It's smaller than a 510), battery size/capacity, or even where to buy replacement coils. On the box, there is a website... MysticVapors.com is up for sale!!, but even that site is vague on anything about it and only sells the starter kits. Is there any information about the device anyone knows about? Its a cigalike size with a tank. Can replacement coils be bought? any gotcha's (besides incredibly low amount of vapor) A link to the exact item she bought is HERE. I feel she's just wasted money, but if I tell her that, she just gets all huffy.
Thank you in advance.
I have been on and off for a few years, mostly off because hubby says the smell of some of my favorite juices is annoying. Well a short stay of me in the hospital changed his mind and he does not seem to mind the vaping as much out of me.
I feel like I looked down for a second and when I looked back up there is all kind of new stuff out there, the aspire esp, eleaf, etc. I switched from the store bought auto to the ego style battery (I always go passthrough) and had gotten up to Kanger t2 and protank for various types of juice. I am a basic person, I might be interested in getting into some of those higher powered mods later (the vapor production looks insane) but I basically want to just throw the tank on a battery and go. I like replacing the atomizers and am not sure I would want to build my own and such. Of the new stuff that has come out since the protank hit (was it a year or so ago?) what would you recommend to a basic vaper? I noticed ALL the ego batteries were out of stock at gotvapes so that got me thinking maybe the ego style battery may be on its way out. I was browsing some other equipment and I was looking at the Kanger IPOW 2 but like I said, I would rather not fiddle and I do want something that is a passthrough as well.
I do realize there is a lot of variability, and the reason the more customization and adjustable stuff has come out is because everyone has different tastes, but I really would like to hear what everyone thinks for getting back into vaping.
Will this tank break with certain juices? Also will it fit on my battery?
Zen Pen Electronic Cigarette Kit
Mini Kanger Protank 2 Mini Pro Tank Glassomizer
I'm currently using a Vision Spinner battery with a few ProTank mini 3's (Which look quite nice together infact - so long as the battery matches the tank). I'm wondering what I should upgrade too.. I'm not really looking to get into mechanical modding yet as I'm not made of money. I'm more or less looking for a better battery with a better lifespan, I'm having loads of problems with my vision spinner and I'm looking for something that could replace that.. Anyone have any good suggestions? Thanks!
Edit; I found this: Aspire Premium Starter Kit [VE754-B1] - £49.95 : Vape Escape and was wondering what your guys opinions are on it
hi guys im ordering this kit SUBOX Mini by Kanger (black) | ECIG CITY and id like to know which is the best battery for it and where can i buy it?
thanks
I figured this would be the Second best place to put this question but the other forum doesn't produce any replies. So I posted it here. Simple answer if you know what to use to glue glass to metal and will be non toxic!
On to the question, I have a first generation Kanger Protank where the body, glass bit, is glued to the bottom metal piece that screws into the Skirted piece of an eGo battery adaptor. One friend was using the glass piece to screw the Protank onto and off of her mod and to refill the ejuice. Short story shorter she popped the glass piece of the first gen Protank.
Big question part, what type of adhesive should I use to "GLUE" the Glass to the bottom metal Piece. Something that is non toxic and will survive the repeated stresses of day to day use that a Protank would encounter?
Thank you for your understanding, Moderator's, the Cross Post.
What do you guys use for testing new flavors? I've always used Borg cartos but I have a hard time finding them now for some reason. The two devices I use most are the Kanger sub/ohm and the Kanger ProTank 2. Thanks!
hy guys one of my shops is doing a giveaway for a 50 pound voucher and if i get it i wondered what your thoughts are on a box mod(works out the box) and what to buy they have Isticks up to 50W and a Istick 50W set for 60 pound with one liqid a "cloud tank"as they call it for big clouds a charger and. a plug but wondered what you think i should get as a new vaper
I have just purchased a Kanger K Simar 20 and I loves it! Only problem is that the voltage is far too high for my Kanger Protank 2. It is giving me plenty of vapour but no taste apart from the burning.
This is the 1st mod I've bought and have been using the vapeonly V Power which is perfect with the protank. I love the feel and look of the K Simar 20 and want to hang on to it. My question is do I now have to start looking at a higher end tank for the mod to counter it burning my atty and what should I get.
Any help or suggestions would be greatly appreciated. Thank you.