Help! My Mech Mod Won't Work!

Hello im looking for a RDA, I have had a shop around and I have narrowed it down to a few, the tobh atty, plume veil, magma and the dark horse dripper. I am more leaning towards the tobh atty as personally it looks the more simple to build on. I will be trying to build .5 ohm coils as that's what im using at the moment (aspire Atlantis) could you give me any advice/recommendations  

Hello very basic question I love dripping and do it all day my one problem is with the mech mods I have I cannot place them down with out locking them or they fire sometimes anyone know of a good clone that will not fire when placed down maybe one with a recessed button of sort?

I currently have a F U and a Stingray infinity  

Hey everyone, I just wanted to post my setup here, nothing to fancy so just take a quick look and feel free to leave a comment or reply.

To kick things off I've got a Seeker Mech Mod by EHPRO. It's a sleek design, all copper, and easy to press button. Little short and thick for those of us who like our setups to look beefy.

Atty- The Tobh Atty. It is a pain in the butt to take apart from the get go but once you get a bit of juice on all the O rings it comes apart fairly easy. Good deck to build on all pre-drilled holes on the three posts 1(+) and 2(-) (Obviously). Deep basin to hold plenty of juice for our drip and drivers safety. My current build is a dual single coil coming in at 0.28 ohms. Using a regular cotton wick.

Juice- "Bliss" made by The Artisan Vapor 100%VG This juice is an explosive flavor of fruits, and for being 100%VG it has a heavy flavor. 39ml bottle runs at 20$ not to bad for a good juice. When I drip with a full basin it lasts roughly an hour, and I heavily use my vape.

Battery- This thing is one of the best right now but I'm still limited on what builds I can do. My 0.28 is safe, however my 0.22 is unsafe (Go figure) ANYWAYS! (Specs) MNKE IMR-26650 3.7(low) 4.2(High) 3500mAh.

So I think that's all. Thanks for reading guess, and questions or comments just drop it down below. Goodbye and VAPE ON!
 

Hi. I have just purchased the heavy hitter mech mod.
The coils I bought are wotofo .28 dual core fused claptons.
It is a asgard mini RDA, it will be a dual coil build , so resistance should be .14
Will a Samsung 40t battery be ok with this build.
In regards to saftey and amp draw.
Thanks  

Hello just recently bought a mutation x v2 and built a .9 ohm dual coil and threw it on my smoktech xpro m80 and it hits like a champ but as soon as i throw it on my stingray it doesnt fire up for some reason  

lol I know I sound like an idiot but I'm proud of myself!!!

Ive vaped over 2 years now and always used clearos for convenience. Somebody at my job stole my mod with my subtank on it and I was kind of pissed to have to wait a month to get a new one from FT. So Im sitting here trying to finagle a iclear 16 onto an old Vamo with stripped threads over and over and I'm getting even more irritated and then I remembered- I had this old $8 Octopus RDA that I bought when I first started vaping and never used because I couldnt build anything under 1.2 ohms on it because I didnt have a mech mod, and I could never get it right and the vape sucked and it took 2 or 3 seconds to even fire. But I remembered I had just bought this cheapo $10 Sentinel mod a few weeks ago that I hadnt messed with yet!

So I tore off the 2 year old build that was still on there, punched another airhole in it with a nail and hammer, did a 4/5 wrap on the screw that came with the subtank, ran some koh gen do through it, tested it on the vamo, got 0.9ohms, dripped on it, rigged it up and put a fresh battery in my mod...cloud...cloud...CLOUD...LOOK WHAT I HAVE CREATEEEEEEEEEEEEEED!!!!!

I still want my subtank back though dripping is a PITA I dont wanna carry a bottle around for a month. But it beats that iclear16. I always thought the vape sucked so bad because I didnt know how to build it correctly, it was just I was building high resistance coils on a VW mod that didnt go above 15 watts.

I know nobody cares, whatever, I feel pretty damn great about it lol...  

I recently picked up an infinite origen v2, my first build was single coil 2.4mm and it was not good on flavor, next build was dual coil 2.4mm at .5ohms, it was better on flavor. No matter what single coil build I try the flavor is just not there. Any suggestions on great flavor builds???  

I've been using my Atlantis on a Kamry K101, and just got hold of a Kbox because I wanted to boost power. Unfortunately, the Atlantis won't fire on the Kbox. Charge indicator shows battery full charge, but it won't fire on any wattage selection.

The Atlantis I'm using fires fine on other batteries I've tried, and the Kbox fires an iClear 30S with no problem - it just seems the Atlantis/Kbox combo doesn't want to work together. The contacts on tank/battery are clean, no gunk or liquid in them.

I've tried Googling the issue, but all I'm mainly finding is people recommending the two together as a good combo.

Does anyone have any idea what could be causing the problem?

Thanks in advance for any help.  

A quick back story to start. I was a 1-2 PAD smoker for about 5 years. I found vapes and quit smoking. I was able to stop vaping and smoking for 18 months until I picked up smoking again for a few years. I have once again been able to stop smoking and started vaping again. Simple transition, some willpower for sure, but I have kicked the habit completely. When I started vaping again I purchased an Istick 50w and a troll. Have been using 3mg liquid only. It's been about six weeks smoke free again and I want to, not only upgrade, but reward myself. I read and read and watch reviews non stop, my head hurts from all of the stuff out now. I use my mod consistently at 45 to 50 watts. I have a 0.4 dual coil build and a chuff top. The heat from the vape is less than perfect, but I like the vapor production. I am interested in temperature control as well. If I need to buy two mods to have everything I want, so be it. Not that money isn't an issue, but right now it isn't a factor. I have been looking at IPV3, Sigeli 150, IPV4, Mech Mods, you name it I have looked and can probably tell you the specs off the top of my head. I just can't decide! I need your help ECF! I know I want at least dual 18650, as my Istick lasts maybe half a day until I need to charge. Good flavor and large vapor production atty, temp control, and good ergonomics. Thanks in advance for all input and help.  

I used to be one of those who thought the whole dripping thing was dumb.

After getting tired of buying coils for my atlantis, I decided to pop in to the store and pick up my first RDA.

I settled on the dark horse. I watched a short tutorial on youtube and built my first coil at 0.6 ohms.

Safe to say the atlantis and nautilis will go into retirement today.

I have never felt a nic buzz from vaping, but I can actually feel a buzz off this thing : I vape my atlantis at 3mg.

Also I love that I simply have to re wick and drip to try new flavours, and best of all NO MORE BUYING COILS.