Ive been having this Gold Kayfun v4 from FastTech since February . Obviously it is a clone . What I noticed since day one was that it was not heating up fast enough . It takes longer than all of my other attomoziers for the coil to light up when I am dry burning it and it produces the least amount of vapor . Ive taken the whole thing apart many times to see if I can find the problem but no sucess . Does anyone know what might be causing this ?
Just wondering what everyone who has used both tanks think of there effectiveness. A 1.6-1.8 bvc coil nautilus vs a 1.5 micro coil in a kayfun v4 (clone). Would you rate them the same?? I only ask because it seems the nic (6mg) in my nautilus tank at 17 watts has less effect than my kayfun 4 (tobecco clone) at 17 watts, (same juice 50/50 mix) Obviously the kayfun is not a dripper, but does the micro coil have any impact as far as vapor effectiveness??Sometimes I think I get a little nic sick compared to the the nautilus mini. idk maybe I'm just paranoid lol
To all the mouth to lung (Tootle Puffers) here ... There was a time when the famous "Kayfun Lite-Plus V2" was the gold standard when it came to single coil / higher ohm / low amp Tootle Puffing.
Now that this atomizer (to include all the Chinese clones of it) are so very hard to come by (to include spare parts), has anyone here replaced there old Kayfun Lites with the new "Kayfun Lite 2019" atomizer ?
I just ordered a couple of Chinese clones of the Kayfun Lite 2019 so I can make the big changeover.
Good bye to the sweet Kayfun Lite-Plus V2
Almost 6 years vaping on this
Rest in Peace ....
Hey guys, sorry if I post this in the wrong place, but I didn't find a sub forum that seems appropriate.
So, I have a BCV Surfrider clone (hybrid) and it has been working great but all the sudden this last weekend I noticed one of my batteries just stopped working.. not a big deal. So I put in another battery. Still not working. So I was playing around and I noticed that my button got extremely hot. I took the battery out and noticed that it was hotter than I've ever felt.
I was playing around with it to see if something is wrong, but everything seems fine. I accidentally put in the battery backwards and it worked fine like how it used to.
Anyone have any idea what is causing this?
Hello.
So I think i kind like a cooler vape been getting some heavy lung feeling lately been vaping a 1.2 ohm single coil 28 g kanthal
cotton wick on kayfun clone v4 Tobecco, i would like to try like maybe 1.8 or a 2.0 ohm coil or is the kayfun v4 really better for
lower ohm coils I keep reading where the kayfuns sweet spot is like 1.2 - 1.5 i did lower my wattage from 14 to 12 but i like to seem some clouds more of a flavor chaser than a cloud person though
so i am just wondering if anyone has tried a kayfun around 2.0 ohms and what the vape was like
thank you
Just got this SX 350 mini M. It's been working beautifully sans a few issues that I am sure are user induced.
First off I will tell you that the Lemo 2 that came in at the same time is Freaking awesome. I have a Kanger Sub Lemo drop and now the Lemo 2. The Lemo 2 kicks *** I the airflow department. It's robust and easy as hell to fill. I put a 3mm coil in it and pancaked the wick. 9 wraps and it's coming in at .118 ohms. Awesome flavor production and nice thick vapor.
So I moved on to the Tugboat to see how Ni200 fairs in the RDA world on this particular device. I went bananas with my coil and ended up with this monstrosity.
I twisted two strands of 28g Ni200 together with a drill and wrapped it 17 times. It comes in at .06 ohms. Performance wise it takes a while to ramp up but when it does it produces thick vapor but towards the hot side. Another thing is that the drip too gets hot really quickly. I'm running it 50J and have the temp cut off at 425F. The hot drip tip is one of the issues I mentioned. I vaped this thing bone dry and didn't get any burnt taste.
Then I moved on to the Lemo drop. The manual had an interesting coil method reccomended so I decided to go for it.
This one I wrapped about 10 times on a 3mm driver. Stuffed a small amount of additional cotton down inside like the manual suggested. The problem is that it gets stupid hot (the drop tip) stupid fast. I'm running it at 17J because this one is coming in at .365 ohms.
Short story long the device itself is working great. I just need to find the sweet spot with this Ni200 coil wise. Any tips in that department would be greatly appreciated.
At the end of it all the LEMO 2 and the Mini M seem like they were made for one another.
I know that i've seen a posting about building a kayfun for less than $15 from fasttech parts, but
for the life of me, I can't find it.
Tried searching different word combos, but to no avail.
Anyone know what I'm talking about, and maybe a link if anyone knows.
Thnx
So I've been using a Kayfun v4 and provari p3 using the hybrid connector and have never been able to get th ohms below 2 using .2mm guage kanthal bought from Vape escape one 2 mm coiling tool and about 6 wraps was initially happy with that but after reading the results other users are having they typically end up around 1.2 1.4 ohms using far more wraps then I have been using I tried to increase my coil diameter to 2.5 mm and the ohms exploded to 5 ohms making it unusable I have noticed that my spring in the Kayfun gets incredibly dirty and charred with what I can describe only as soot if anyone has any insights into what could be going on I would much appreciate it ive been enjoying my Kayfun but I'm still looking for that mind blowing Vape I keep reading about
I saw one on Ebay once and should have bought it then. Now all I can find is places I have never heard of and this Tobeco ss/black/blue kayfun 4 atomizer rba kayfun 4 wholesale best quality kayfun 4, View kayfun 4, Tobeco, tobeco Product Details from Shenzhen Tobeco Technology Co., Ltd. on Alibaba.com#! which I am not about to buy 20 of them. lol Does anyone know of a place that has them? I would rather have someone suggest a place than get it from a place I have never heard of. TIA
Just as the title says..just bought a kayfun lite +/ Russian 91% clone, and the drip tip gets hot after a few hits..using mvp 2.0 that only goes to 11 w ( which is where I usually vape) with 1.7 coil/cotton wick..should I just look into another drip tip made of a different material? This is my first rta..my protank 2 tip never got hot even when chain vaping..the tank would warm up pretty good, but never the drip tip.
Has anybody seen these yet. Its kind of like a cigalike except it has actual tobacco in it and you need to light the end. A friend stopped over with a pack so I tried it and was pretty suprised at the amount of smoke/vapor. After I was done i busted it open and all the tobacco was still there except a bit off colour. Pretty interesting even thouh I could not figure out how it worked. Suposidly PM realeased them in the 90s, but they didnt sell. Of course they re release it now that vaping has gained in popularity
Dont really know what to think of them on 1 hand it was pretty satisfying on the other your still heating big tobacco.