Tank Wobbles? Try This

I have been having an issue where when I screw in any kind of tank, my vamo 4 reads "SHORT" and "LOW LOAD." I have made really nice coils to no avail. Someone at a store told me to just turn up the voltage - worked for a bit but then didn't.

Someone on here, when I posted about it, said to get something to wiggle the pin out a mm or two because it has been "crushed" with the insulator. Did that. Worked for a bit, back to SHORT and LOW LOAD.

SO, I need to buy a new one. I have a few different pv's, but this is a favorite because of its variable voltage. Is there a place (online) where I can buy just the piece I need? Attached is a pic of the faulty hardware...  

I busted my tank and my local store didn’t have another so I just decided to buy a whole new head/tank to go on my SMOK morph 219 mod. I asked the store clerk several times before I made the purchase if the tank I’m buying is compatible with my mod. He insisted it would work. Well now when I get it home and try to use my new tank on my mod (SMOK morph 219) it keeps asking if it’s a new coil with a different size every time. Any advice? And no I didn’t forget.... the new tank is a vaporesso cascade tank 7ml. 60.5X25MM 81g.  

My buddy wanted me to show him how to wrap up some coils. Hes using a vamo v5 and he bought an orchid v3. He doesnt like harsh draws but rather a smooth, light, cool pull. So i decided to try that standard wire that comes in the orchid v3's package. Its that stock, hair thin wire that comes in the box with most of your typical RDA's RTA's, but i cant figure out the gauge dimension on it. Im trying to get him a whole roll of it so he can wrap his own. If you guys can help me out i would appreciate it. Thanks!  

I ordered a new version of the Vamo V7 varible voltage 40 Watt mod and I am wondering if the Kanger Subtank Nano with a 1.2 ohm coil would be a viable combination. I want to try this tank just for the better flavor possibility but since the Vamo V7 is only rated down to 0.8 Ohms, I figure that I would have to use the 1.2 Ohm coil that is supplied with the Nano. I'm not quite ready to start dripping at this point in my vaping experience but want to get close to it. Are there any other tanks that would work better with the Vamo V7 than the nano? Thanks in advance for the advice.  

Hey guys,I am staying in Malaysia and I find the difference between online store and retail store is that all the retail store in my country doesn’t stock in sub ohm tank,they only sell Rebuildable tank.I traveled to Philippine and their retail store is the same as Malaysia.If your getting a sub ohm tank in both this country,I find that it’s a lot easier to buy online  

Problem

You've screwed your new atomizer into your mod. It's all the way in and works, but the atomizer wobbles.

Why? - Because the positive 510 connector is too long, meaning that only the front part of the negative threading is engaged.

Solution

A shim.

shim
/ʃɪm/
noun
a washer or thin strip of material used to align parts, make them fit, or reduce wear.

Cut a disk the same size as the base of the atomizer, put a hole in it's center slightly larger than the 510 on your atomizer. Slip this over the atomizer 510 and screw it into the mod, wobble gone.
The thickness of the shim will need to match your application. If it's too thick the 510 may not reach the positive pin and no juice will flow.
I initially used a credit card which was too thick (1mm), the positive pin didn't connect. I then used a playing card (0.5mm) and this was spot on.

Why? - The base of the atomizer is now supported, so the free play on the pin does not matter.


Owyhee Mountain Fiddle Shop: Zen and the Art of Motorcycle Maintenance

 

I will be making some juice. Yes, I know how to do it, but then comes the question about how to sweep it quickly. I've heard some people purchasing a ultrasonic cleaner (wish I had the money), and for every 2 hours of doing it this way, it sweeps the juice (if done the old fashion way) 2 weeks. I'm all for that. Now, what if you took a beater and beat it for 20 mins? Would that be mixing up the stuff inside really good? Now comes the next part. Let's say you make enough juice for 1 month (in my case 1000 ml) and place this in 4 jars. All the jars get the beater treatment. Then I take one jar and use that for the week. Wouldn't the other jars be sweeping and then finally catch up? Or maybe I don't understand this sweeping at all.
Now for the next question: I just when from coils to mesh. I love it! Not having to change our a coil for 2 weeks is great! Okay, now the mesh I have in my tank now says 50-80 watts (I guess). Is it okay to still vape it at 40 watts, as 50 is a little hot for my taste.
Thanks all for your help in this.  

Hi.....looking at getting the vamo V6 20w VV/VW . What do you guys think?

Vamo V5 Variable voltage/variable wattage personal vaporizer  

Hi guys,

So I Got my Vamo v5 and pt2 a few days ago and I have read that the 510 thread wears down easily on the Vamo. So, I ordered a Nautilus BVC as I find my Pt2 is going through juice really fast at about 5ml a day with less usage than before, and I see it comes with an eGo threaded cone and I was just wondering if it will help keep the 510 thread intact or if it is purely cosmetic?  

I need orings as my Crown 2 tank is leaking. I have a digital caliper but I am wondering how do you measure them without distorting the perfect circle? Also since they are worn the size will be off a little. How do you compensate for that?

Also wheres the best place to order and what material like silicone is best?
Thanks