Fuhatten Button Stuck

Not sure if this is the right place to post this. Received a silver istick 50 yesterday and a black one today. The black one is good but the silver one will stick if the button is pushed on the bottom part of the button and it'll keep fireing since its stuck. I can get it to release by manipulating the button. Is that something the company will take care of??? I do like the battery!

Thanks
Chris  

I have had a lot of mis fires on my Smokless Owl 25.00 squonker and had to press down extra hard

and sometimes side ways to get it to fire.

I just done some contact cleaning and scraping on the Smokless Owl Button.

I took my wifes Emory board finger nail file thingy and depressed the firing button and held it depressed and rubbed it

across the firing pin and then took a small jewlers screwdriver and scratched it back and forth across the end of the pin and

did the same thing to botton ground pin.

I noticed some black color on the end of the firing pin before I started this cleaning process.

I gently took the screw driver and scratched back and forth across the positive and negative end of the battery just to

take any small film or oxidation from the ends just to make a better connection.

It seems to fire now just like it should with no MISFIRES---mod is now perfect !  

hi i have and endura Endura T18 vape and it is fully charged and full tank but when i press the button it goes orange and is still orange when i take my finger off the button but then it goes off. when i press the button the cape is not firing and doesn’t work. what do i do?  

Hi there...a month ago I bought myself smok rpm80...is it considered normal when the firing button is being pressed it kinda felt rubbery or mushy abit? The pod fires flawlessly though.  

I caMe home from work and seen my topside single was lit up on my dresser.I hadn’t used it in a couple days so I picked it up only to see that the wattage is going down non stop and won’t fire and it’s as if the wattage down button is stuck. It’s not though. I can’t find anything small enough to take the panel off so I pretty mad. Only
I’ve had Mabye 40 refills with this mod and never been dropped . Just use it on the weekends when I drive mainly that’s it . This is why I hate regulated mods. Anyone else have this problem? I don’t know why it doesn’t even come with a Alan key to
Take it apart.  

dropped my SMPL clone. got dinged up pretty bad. tried to fix it, but it's bent out of shape. copper so figure. the button was not backing out all the way. fixed to a point where the button is functioning, but don't feel all that safe. ordered a new one. i like SMPL a lot. looks very plain jane, but works like a champ.  

I accidentally locked the up and down buttons by pressing both of them simultaneously for 2 seconds, I have tried unlocking them by doing the same thing like the instruction manual calls for. It doesn’t work, no “unlock” pops up or anything. You can hold them as long as you like and...nothing.

I have since figured something might be wrong with it as I am almost positive I’m doing it correctly. Now I have tried getting the reset button to work in hopes of the up and down buttons being unlocked upon reset. I hold the reset button for 5 seconds and I’ve tried the method of the combo with the fire button and reset as well as the up arrow and reset and the screen goes blank and turns back on but never says reset and the settings are still the same as before.

My next idea is plugging it into my computer in hopes of an update fixing this but other than that I am out of ideas. The device is stuck on 20 watts which is too high for the cartridge I’ve got on it. Does anybody have any ideas, please help me out.  

What are some purchases that you guys made that you regret?

For me, it was the Nemesis Clone mod. That terrible piece of machinery went wrong in literally every single way it could've. Don't even get me started on the little pen that had to be stuck in the button in order for it to fire.....

Go!  

I've got a couple of these little mods and both have the same problem. They continue to fire after the button is released. When it happens the display changes to the power on/off and keeps firing until the unit restarts (presumably after the 15 second cut off?). I can only think that the mod is registering 3 presses when I fire which triggers the screen change, and there is a bug which stops the release of the fire button registering. Anyone experienced this? Any fix? I'm surprised it's happening with two units so it must be happening to someone else!  

I have an istick 20V which I use an Aspire tank ... the adapter is stuck to the bottom of the tank I cant unscrew it. any one have an idea how to remove it other than pliers and ruining either the bottom of my tank or the adapter?... I tried hot water n soap but no go. any suggestions will be appreciated