Best Kayfun Setup For Boba's Bounty

So I decided to try a 1,6 ohm coil on kayfun v4 clone Tobecco and I am using 28gauge Kanthal with a cotton
wick on a Rdna 30 and its vaping well at 15 watts I have a kanger subtank mini coming in the mail and here goes my question
So the kanger subtank states that with a .5 ohm coil i could vape up to 30 watts but the voltage comes in at like 3.8 volts
I was under the impression that the rdna 30 needs at least 4 volts to work which kinda brings me to my second question
What is the point of of sub ohms? cant i just build a 2.0 ohm coil or something like that to achieve the results as if i was subohming
I am very confused on this
thanks for the replys in advance
Oh yea is a 1.6 ohm coil at 15 watts a normal build or any recommendations for the kayfun v4 for watts and ohms thanks again  

Hello.
So I think i kind like a cooler vape been getting some heavy lung feeling lately been vaping a 1.2 ohm single coil 28 g kanthal
cotton wick on kayfun clone v4 Tobecco, i would like to try like maybe 1.8 or a 2.0 ohm coil or is the kayfun v4 really better for
lower ohm coils I keep reading where the kayfuns sweet spot is like 1.2 - 1.5 i did lower my wattage from 14 to 12 but i like to seem some clouds more of a flavor chaser than a cloud person though
so i am just wondering if anyone has tried a kayfun around 2.0 ohms and what the vape was like
thank you  

Hey everyone,
I've been vaping for about two years now, and have decided to start dripping. For the last few weeks, I have been dripping on an IGO-W, 26G Kanthal single coil (7 wrap micro coil reading at 0.8ohms) on my iStick 30w.

I just recently purchased a new battery that should arrive today, and was wondering if anyone had advice/tips on producing some fat clouds! Dual Coils? Different coil builds? Number of wraps? Watts to vape at? I think you get the picture lol.

The items I will be using are as follows:
-SMOK XPRO M80 Plus
-IGO-W
-26 Gauge Kanthal Wire
-Japanese Organic Cotton
- 80vg/20pg Juices

All input is greatly appreciated. Thanks!
-Tyler  

So I've been using a Kayfun v4 and provari p3 using the hybrid connector and have never been able to get th ohms below 2 using .2mm guage kanthal bought from Vape escape one 2 mm coiling tool and about 6 wraps was initially happy with that but after reading the results other users are having they typically end up around 1.2 1.4 ohms using far more wraps then I have been using I tried to increase my coil diameter to 2.5 mm and the ohms exploded to 5 ohms making it unusable I have noticed that my spring in the Kayfun gets incredibly dirty and charred with what I can describe only as soot if anyone has any insights into what could be going on I would much appreciate it ive been enjoying my Kayfun but I'm still looking for that mind blowing Vape I keep reading about  

Just wondering what everyone who has used both tanks think of there effectiveness. A 1.6-1.8 bvc coil nautilus vs a 1.5 micro coil in a kayfun v4 (clone). Would you rate them the same?? I only ask because it seems the nic (6mg) in my nautilus tank at 17 watts has less effect than my kayfun 4 (tobecco clone) at 17 watts, (same juice 50/50 mix) Obviously the kayfun is not a dripper, but does the micro coil have any impact as far as vapor effectiveness??Sometimes I think I get a little nic sick compared to the the nautilus mini. idk maybe I'm just paranoid lol  

Just as the title says..just bought a kayfun lite +/ Russian 91% clone, and the drip tip gets hot after a few hits..using mvp 2.0 that only goes to 11 w ( which is where I usually vape) with 1.7 coil/cotton wick..should I just look into another drip tip made of a different material? This is my first rta..my protank 2 tip never got hot even when chain vaping..the tank would warm up pretty good, but never the drip tip.  

I have an Evod with a rebuilt coil (japanese organic cotton) and was wondering if I could vape high VG juices in it. I use a VV twist battery. Possibly?  

Hey guys,
I recently started playing around with 24g kanthal in a kayfun lite plus clone that I had bought last year and started to notice a serious issue which was that juice would at some point start to look orangish, when I recently opened it up to change the coil to put in a new flavor it was completely black. However when I had previously fired it and had noticed no burnt taste. Any ideas as to what's going on.
Background on build
24g purchased from brick and mortar store
Cosmic Orange BLawesome juice (pinkish)
0.6ohm coil 6 wraps
eleaf istick at 32.2 watts

Cheers  

Sorry guys, I wasn't sure exactly where to post this, it could fit into at least 4 different forums so if this isn't the best one please move it to the correct forum.

As the title states, does anyone have a P3 Titanium + Kayfun v4 and can share a picture? I'm just trying to get a sense of how the Ti looks compared to the SS used on a lot of tanks, specifically the Kayfun v4. Also, a picture with the P3 Titanium + Squape-R would be great as well.

Not to be picky or anything but I would really prefer authentic versions over clones as I plan to buy the authentic versions.

Thanks everyone, it's much appreciated!  

Just recently purchased a Orchid V4 and loving it so far.
Though the Orchid uses two coils.
Considering adding a Kayfun to my modest collection.
My understanding that the Kayfun uses a single coil.
That being said, does it still vape as good as a Orchid V4?
Im sure theirs members here who can give first hand info on these two?
May like to share pictures?
And builds, methinks 28g is best.
Though I may try some 24g.
Running 28g ten wraps, .9 ohms.
21watts seem to be my sweet spot.
Just wanted to pick your mind on these.

Jim