Good Fix For Itaste Vtr Battery Door Anyone?

Hi all. I have a couple of these. One is perfect- flush fitting, no rattle. The other has a slightly looser battery door. There is a little play where the slot hinges sit meaning there is movement at this point which makes the battery cover too clicky. I think that the slots are being held a hair higher in the construction. It's too minor an issue for a return, but I do find it annoying. In all honesty, in a cheaper mod it wouldn't bother me so much. Anyone got an easy fix or is a skin the best option?  

Molicel 18650s are ever so slightly bigger than samsungs. I found this the first time I popped a couple in my mod. The fit was a little bit tight. Now as this applies the the legend, the battery door being on the bottom and spring loaded, it's a bit of effort to close it. Not a deal breaker but i just need to make sure its closed securely. Now, lol, this morning I put in some freshly charged batteries, closed the cover and set it down only to have the door pop back open. The spring on this door was strong enough to flip my mod over when it popped open. Its probably only funny if you were here an saw this happen.  

My local B&M has an iTaste 134 in their display case, but this place is owned by the same people that own the "smoke" shop next door. Back when I used to partake in that other stuff, I was ripped off when they sold me FAKE hardware. It was labeled and branded as the real thing, but after some internet research, I found out it was very blatantly fake.

I'm a bit worried that their Innokin product may suffer from the same thing, since this shop is owned by the same people. Is there anything I could look for while examining it to know for sure if it's authentic? Are the clones actually branded with the iTaste logo? Or if it says, "iTaste" is it real?

Is it even worth taking a chance, since I know the owners have faked me out in the past? (I just don't know if the vaping industry might handle fakes differently with all these clones I keep hearing about.)  

So I just bought a kit, it doesn't come with batteries -- which I wasn't told (was led to believe it was charged through the USB port according to vape store employee). So I ordered x4 Nitecore-NL1834 18650 3400mAh 3.7 Protected Lithium Ion (Li-ion) batteries and now the door won't close. I read an old article saying that Protected 18650 can be bigger. If there's a possibility of buying batteries that cost $18 a pop shouldn't they let you know there's a chance that it won't be the right size?
Is there a trick to getting the battery lid to close or do I need to now buy unprotected 18650 batteries and hopefully get my money back on the protected batteries I bought?  

Hello everyone, the thread's title is pretty self-explanatory. I've been vaping on my trusty iTaste VV v3 for the past 9 months but alas, its battery is starting to kick out and does not hold charges like it used to. I'm finding myself charging the device 2-3 times a day if I'm chain vaping. Needless to say, it's time to pick up a new vape. I have done some reserach online and it seems that the iTaste VV v4 is now available and it seems to be the same as the v3 except with a new and improved LCD as well as a 1000mah battery (as opposed to the original 800 mah that the v3 has). I was thinking on taking the plunge and getting the v4 however before I did, I wanted to ask to see if anyone here could recommend any other pen-style vapes that may be even better than the v4. My only requirements are that it be variable wattage and voltage, and the bigger the battery, the better. The iStick 30 seems like a good option for a compact vape however if I'm putting my vape in my pants with my phone, the iStick 30 may be a little too bulky. Subohm would be nice as well, but not necessary as I won't be cloud chasing on a pen-style vape anytime soon.

Thanks in advance for all the feedback!  

Hello, I just bought an Ehpro Nzonic V3 and tested it out using a Kanger Subtank Mini with a Samsung INR18650-25R battery. After a few puffs I took it apart and noticed there was a tiny needle sized impression on the positive and negative contacts of the battery. I looked at the mods battery contacts and they do seem to be pointed. Should this worry me? I took some pics but im posting from my phone and not sure how to get them on ECF? Do I need to upload them somewhere else then post the link?

Thanks in advance!



 

Ordered 3-17, shipped 3-18 from the UK, I'm in Virginia.....

I scared the crap out of the mailman yesterday. I happened to be right at the front door when I heard the mailbox lid drop. Swung open the front door like a madman...

No joy

Now I wait.  

I just bought a mirage a couple weeks ago and can already understand the battery door issues. Is there anyone here that has been using the mirage daily without issues over time? I usually have a PICO in my pocket because of the durability but the mirage was intended to replace this as the daily driver. Is it worth purchasing a Thor2 or vicious ant with 75C for longevity? Is there a single battery mod out there that is pocketable with a DNA75c that can take a beating?  

i have a new Itaste VV4 15 watt 1000mah
I don't seem to get as much time out of my battery as i expected- does anyone know about how long it should last?

I'm going to test it out to see exactly how much time i get out of a full charge but as of right now i just feel like it's not lasting as long as it should.

Also when I use it plugged up on a charging cord the battery still runs out till it eventually has no charge and turns off and cant be used till it adds up some charge on it- I thought since it was a pass through device i would still be able to continue to use it while being plugged up on the charger, so im not sure if I should actually be able to with this device and mine is not working correctly or thats just how this unit does work.  

Hello all, I just bought the Ageis X. Owned the Ageis legend and I'm in love with GeekVape.

My Smok mods were pure crap. Alien 220, battery door issue. G-Prev , 510 connector ended up doing the endless spinning when screwing on a tank.
So, to my question, the Ageis X says it has an updated As 2.0 chip. I googled it and can't find info on this chipset. Anyone have any info on this? Google DNA chipset and you get a billion such pages worth of information.