Kanger Protank 3

Hi all

So I'm currently set up with an iStick 50w and a SubTank (big un) all thanks to you guys im in Vape Heaven.

want i want to ask is this -

My Girlfriend is now getting more into Vaping and hasnt touched a Cigarette in quite some time. she has an iStick 20w and loves it (cos its pink -_- )

but she's not liking the tanks (aspire Viva Nova, one with a cross on it (completely forgot the name) and a protank 3 mini)

Shes tried my subtank AND LOVES IT! she's liking the airy draw and the ultimate flavour.

My question is she likes to vape at around 3.0-3.3V. Will the Istick 20w be able to SAFELY handle the protank nano with the 1.2ohm coil in?

I've told her she may have to up the power abit but other than that she should be fine right?  

Hi,

Just wondering how to get a good clean of dirt and juice residue buildup on airflow base part for tanks and rda's. I find this part to be the hardest to clean. Not sure if you can run it under water or just try and get into the itty bitty cracks and crannies with a paper towel like I currently do. The tanks I use are mainly Nautlus Minis and Subtanks. The RDA's are freakshow, derringer, tobh, magma, etc. HOW do you get a good clean on the AIRFLOW CONTORL BASE/VALVE​?  

Hi,

I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.

I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.

I am not interested in a big old MOD or anything. I like the pen-like style.

I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.

Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.

Anyway, thanks for any input on this!  

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

I have had a kanger protank 3 for a year and a half now with a itaste vv battery, i need a new updated Ecig now.

I am willing to spend around £30 (no more than £35) and would need a battery and a tank.


I want the best flavor and vapor production for the money. I also want it to be reliable as the kanger protank 3 leaked a lot in my time and sometimes would randomly stop working.


Thanks guys!  

Hi
I got myself second Caliburn and from the start I feel that auto firing is not as fast as my first one, just like a second or so behind. If I use the button it seems to be OK.

Also, it feels more airy. I check the same pod on both devices and first one seems to have a bit more restrictive airflow. Or, due to late auto firing, I am inhaling first clean air instead of vape, and thus, the feeling of less restrictive airflow.

And lastly, which is not a problem, but it is not feeling OK, second Caliburn pod latching thing feels more loose, where on the first, when I push pod into the slot, I can feel and hear distinctive click, on the second, just a very little bump and very shallow click.

Would first, auto fire delay constitute good grounds for warranty replacement? I got it less than a week ago.

Any thoughts?  

I figured this would be the Second best place to put this question but the other forum doesn't produce any replies. So I posted it here. Simple answer if you know what to use to glue glass to metal and will be non toxic!

On to the question, I have a first generation Kanger Protank where the body, glass bit, is glued to the bottom metal piece that screws into the Skirted piece of an eGo battery adaptor. One friend was using the glass piece to screw the Protank onto and off of her mod and to refill the ejuice. Short story shorter she popped the glass piece of the first gen Protank.

Big question part, what type of adhesive should I use to "GLUE" the Glass to the bottom metal Piece. Something that is non toxic and will survive the repeated stresses of day to day use that a Protank would encounter?

Thank you for your understanding, Moderator's, the Cross Post.  

I just got my Aspire Atlantis in, and to be honest I'm not at all satisfied, and I can't help but wonder.... Did I get a defective unit?

I bought it and the Kanger Aerotank Turbo quad coil tank. My resistance on the Kanger is registering at 0.9ohm and I'm sending about 23watts to it. The amount of vapor is excellent, flavor is good, and it's not an overly warm vape at all.

So then I slap on my Atlantis. The 0.5ohm is registering at 0.6 (big whoop...lol) and I'm sending 28 watts to it. First, the hit is BEYOND airy. I'm on the lowest airflow setting and there's no pull required at all. I believe it isn't sealed well somewhere along the airflow adjustment, because when I blow a bit of vapor back into it as a test, it comes out of the airflow hole (obviously) but it also flows out of other areas around the airflow ring. This doesn't happen with my Aerotank Mega, Aerotank Turbo, or my Nautilus...

Furthermore, the hit itself is just BAD. The flavor is off, the vapor is WAY too warm to be enjoyable, and where as I exhale nice sized clouds using the Aerotank Turbo, I exhale pathetic small clouds that aren't even thick when I use the Atlantis. Considering its a lower ohm with more watts going to it, how is that even possible??

So, no resistance at all on the airflow, even on its smallest setting, and obviously I have to be getting air from some areas around the airflow ring. The vape itself tastes bad (not burning cotton bad, just a bad flavor), and it's VERY warm. If I try and pull on this the way I do with the Turbo (only 0.3 ohms higher), I exhale a measly small thin cloud AND I often get choked when doing so.

So I'm just curious.... Is this the way this tank hits?? I can't believe how many praise it if so, I see no appeal. So I can't help but think I must have gotten a defective tank. I've tried lowering the watts down to about 22watts just to see, and even though the vapor wasn't AS hot, it was still uncomfortably warm and did not do my liquid's flavor any justice.

Any thoughts? I really would like to hear if this is how these new sub ohm clearos are going to hit, because if so I have absolutely no interest in making the switch.

Thanks in advance,
Finch  

I don't know if anyone has issues with their protank 2 but I hear a lot more negative than positive on them. I was messing with one of those bootleg ones and I couldn't figure out why it kept on leaking. Now just yesterday a friend gave me his protank 2 and Im guessing it was because he was tired of it leaking. When I first took it apart I took all the pieces off and connected them all again one by one making sure it was air tight as I added each piece. Everything was air tight until I got to the coil. I was taking a drag off it and it immediately started leaking and I was like why the heck does it do that? I noticed that it was leaking from between the coil and atomizer where the two little airholes are. What I did to fix this was take an old coil and gently pull off the little silicone ring (above where it says the ohms and below the wick) then I dropped it into where the coil meets the atomizer. After I just screwed in my coil and it works perfectly. No leaking whats so ever! Very good cloud production so far I recommend trying this if you have one. Sorry if someone already wrote this but I did a lot of looking around and never found an answer. Also didnt know where to post this so I apologize if this is the wrong section.  

Does old coils have any negative affects?

I typically burn off the gunk on the coils and put it through a good rinse then change my wick every few days. This was especially true when I'm using standard kanthal on the Protank.

I recently switched to a Solomon 3 using claptons. I find that there is very little gunk on the coils, I still burn off what I can before replacing the wick. I usually change the coil every week and one wick in between. On this one however, I'm 2 weeks on on the same coil and had only replace my wick once using the same liquids that I normally use on the Protank.

What I notice is the vape isn't as smooth as if I were to put in a fresh coil. I think I just answered my own question but what do you guys have to say about it?