Battery Heating Up, Coils Not Firing

Okay guys, first of all, sorry if this is in the wrong section, was unsure where to post this warning.. I just want to show you guys my experience with eGo chargers.. I'm unsure of where I got this one, I think it came with my Vision Spinner battery, I'm pretty sure the supplier just bundled it with a crappy cheapy one.. Here's what happened to mine:
Imgur

I noticed after a weird flashing occurred on the LED, the battery LED was constantly flashing, I noticed that the plastic had caved in and I thought I had stepped on it or something, but nope! The whole thing was melting and it smelt absolutely horrible, I opened it up and I noticed that one of the capacitors on the PCB had burnt out.. Be careful with chargers and NEVER leave batteries charging unattended, this could've caused a serious problem if it had caught fire.. Please be safe everyone!  

SO every video Ive seen of someone causing a battery to vent it took a few minutes of the battery sizzling and popping and heating up, smoking, etc. So why do people talk about a battery venting like its an imminent threat? As if say you built a 0.1 ohm coil and didnt know it, fired it and it would blow up in your face? I've never seen it happen or heard of that. Not saying it cant, I'm just wondering where the idea that a battery can just instantly combust without notice is coming from.  

I was vaping on my subtank mini on top of a cana clone and it was working fine until the screen started glitching. It would only show like half the screen or the screen would be all jumbled up and it wouldn't fix until I turned it on and off a couple times. I took out the battery and let it sit overnight and when I popped in a new battery today the screen isn't lighting up at all, also its firing a lot weaker, and randomly locking itself. What can I do?  

This happened just last night. Before bed last night, I decided to check the forums and email. My wife already was asleep. I decided to load up my dripper and vape while browsing. I put in a freshly charged battery. I was running a .2 ohm build in an older Efest 1600 V1 (rewrapped sony VTC3). I took a few puffs as I tried to load the website.... the internet was down, so I locked the mod, and went to the router to check things out.... After working with the router for about 5 minutes, I realized, I wasn't getting a signal from the internet provider.... so, I sat down to do some maintenance.... Through the light of the computer monitor, I saw some vapor coming from the drip tip..... the mod was NOT locked, and it was continuously firing for 5+ minutes. I went to pick it up, and it was too hot to pickup, so I turned it on the side so it would stop firing..... I grabbed a towel, and took it into the bathroom put it in the sink and turned on the water.... It sizzled when the water hit the mod. After a few seconds, I unscrewed the bottom button and took the battery out.

The mod cooled down battery stayed in the water for a bit. It was so hot, it started to split the shrink wrapping (it continued to shrink it until it split). The mod was fine, battery was fine... no bulging, smell, etc. I still might not use the battery just in case. turned out, I had not locked the bottom ring.

So, continued advice... do not vape a pulse rating, always vape continuous rating and use safe batteries.  

I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?  

Hello, I just bought an Ehpro Nzonic V3 and tested it out using a Kanger Subtank Mini with a Samsung INR18650-25R battery. After a few puffs I took it apart and noticed there was a tiny needle sized impression on the positive and negative contacts of the battery. I looked at the mods battery contacts and they do seem to be pointed. Should this worry me? I took some pics but im posting from my phone and not sure how to get them on ECF? Do I need to upload them somewhere else then post the link?

Thanks in advance!



 

Okay so I did look this up and it appears that other people have mentioned this specifically with sigelei mods but I didn't see any that were more recent. I look at my mod to see what my batteries charge looks like to see if I need to go ahead and change batteries and I swear to God the thing starts jumping around as though the batteries are charging themselves and then going back to the 40%. Apparently that's a problem that the mods have and isn't something to be concerned about but it freaked me the heck out. They're doing just fine now that they're in their external charger thingy but I just want to make sure that that's not a sign of something going wrong with the batteries that it's just my mod being weird I've checked the connections and everything to make sure it was clean and that the batteries were fine and not dented or unwrapped and everything looks good. I just need some assurance that the batteries were not like failing or that a regulated mod would shut itself off if batteries were jumping around like crazy in reality if that's even possible
For clarification it was doing this when I was not firing it  

So I have (2) 3100mAh Efest batteries rated @ 20A and (1) 2500mAh Efest batterie rated @ 35A. I'm experiencing a pretty annoying problem with all 3 of them and that is they aren't lasting nearly as long as I feel they should be. I can EASILY vape through a battery in less than one hour while heavy vaping. I'm aware that I am sub-ohming and that requires more power from the battery but these are just going way too fast and something isn't right. I have a BEC Pro mod that takes a single 18650 battery and I'm vaping an Aspire Atlantis tank @ 35 watts with the .5 ohm coil installed. I charge each battery fully with a Nitecore i2 before using them and it'll say 4.2V on my mod & on my Smart BEC app it will say 100% as I take my first few puffs but then starts draining at a ridiculous rate until they are dead. I am not aware what the mod efficiency is on my BEC Pro or if there might be something not working properly within my device. Can someone please help me find what's wrong with these? Maybe some of you have eperienced this problem with Efest batteries in the past? Thanks in advance!

Edit: These are genuine Efest batteries as I bought them straight from the manufacture on Ebay.  

Hi everyone,
Hope your all having a great weekend! Hopefully someone can help me figure out any good canadian or American reputable vendors for 18650 batteries for my arrow sense mod. Out of all the vendors listed in the battery thread, only one had the batteries I wanted, but it was in the US and would cost over $50 for shipping. Hoping to find shipping for $20-30 canadian instead. I am particularly interested in the batteries on the forums listed as tested by mooch in a stickier post. Or Sony battery with 2500 mah , I like to vape with two 18650 batteries at 60-80 watts.  

Hey guys,

I finally updated my charger a few days ago (I think before I had the VP2) or something like that. Quick question on something I'm noticing that seems a bit odd to me.

When I charge (for example 18650's), a battery that's fully charged in channel 1...it flashes FULL/0.00 mA, I remove the battery. A few minutes later, I'll put the battery back in the same bay, and all of a sudden there are a few hundred mA's that show up on the screen that need to be charged back into the battery and it takes a few minutes for channel 1 to recognize the battery is fully charged and flash FULL/0.00mA again (although it does show above that's fully charged at 4.2v).

If I take that same battery and do the same test but this time in channel 2, within a few seconds it recognizes that the battery is fully charged and flashes FULL/0.00mA. So it seems channel 1 is not working as well as channel 2 is, when it comes to recognizing information from the battery.

Is this normal for this charger or do I have a defective charger?