I Need Help....

Hi all,Im buzy trying to re-wrap some of my batteries,got some funky coloured ones and put them on.....I never gave the wall thickness a moments thought so you can imagine my horror when I came to putting the batteries in the holder and they are sooooo tight,can anyone help and let me know what wall thickness I should be going for and better still recommend a UK based site where I might get the right tubing,many thanx friends..  


Similar Content



Battery Wrap - Does This Look Ok?

One of my 18650 batteries had a snag so I did my first re-wrap. I thought I had it positioned well before turning on the hair dryer but seems I got way more wrap on the pos end than on the neg end of that Samsung 30-Q. Here it is next to an original wrap. There's not much wrap at all on the negative end. Do you think it's ok or should do over?

 

Vaping Causes Bad Tv Signal Lol

soooo I have a TV with an indoor antenna that works with a power brick to enhance the signal...
I got a vaporesso gen mod and when I bought it I used to charge the batteries with the USB port for a few days...I was using a 1amp charger tho and it wasn't getting hot with that slow charge anyways...
The thing is that when I was plugging the mod to charge then the TV used to lose signal...
I was using a thingy that u plug to wall and u get multiple wall plugs sooo the TV and the TV antenna and the mod all hooked up to that multiplug thingy..
So I was thinking must be somekind of electromagnetic field????? created or something??? Hahaha
Anyways that's old cause
I don't charge the mod with usb now....

But the thing is that I sit and watch TV and when I am right in frond of the antenna and I take a puff then the TV losses signal and it's not I cut the signal with my body or anything ...the singal get lost only when I press the firebutton lol...lol this happens only with my gen mod and not with my other smaller coolfire z 50mod
WIERDDDDDDDD AF?  

Is It Ok To Charge Vaporesso Revenger Mini And Go

Is it ok to charge vaporesso revenger go and mini with a wall plug, using the cord it came with? There was no wall plug included with the kit. I usually charge it in my pc , so am wondering if a USB wall plug in adapter is fine to use as well?  

Fake Sony Batteries

Here while back I'd purchased a bunch of 18650 batteries.
Mostly LG H2 & 4's. Samesungs, Panasonics and what I'd thought was Sony.
But found out they are cloned.
So I just sit them to the side and thought oh well.
Anyhow, i have a few extra regulated box mods & thought that I'd try some of these cloned Sonys.
They seem to work and last just as long as my other batteries.
My question, has anyone ever found out what these cloned batteries actually are?
I've been keeping a close watch on these fake Sonys.
No issues so far.

Jim  

What Batteries And Charger Should I Get For This

I wanna buy the sigelei oni edition 150watt but iv not used any box mods that require batteries yet, my jellyfish and innovkin has internal batteries, can you gents recommend 2 good batts and charger. and is there any tips i might need to know.  

Wally World Wall Warts - Usb Cable - Istick

I researched my ProVari to death before buying it two years ago. When I saw the iStick 50W I jumped on it. I read somewhere that a 2 amp wall wart with any basic USB to micro USB cable would be optimal.
I'm not technical so dumb it down please. The deeper discussions are lost on me.
If you have something that works and is safe I would love to know what you use.

Thanks in advance for any guidance on this topic.  

Batteries

Hello

Haven't been here in quite a long time but I have a question.

I have had a good supply for batteries for about a year now and have bought batteries from the same place... rtdvapor since I started vaping.

Batteries are getting old, looking to get new.. but when I go to rtd it says it is unavailable.

So I guess I have 2 questions.

Anyone know if rtd vapor is still in business? and if not anyone know a reliable place I can go for batteries?

Thank you all in advance!  

Got A Freemax Tank

I had thought Segelei was one of the better tanks out there but seems that coils burn out easily. Been using below stated wattage for the most part. Recently got a freemax tank and the difference is night and day. I have a fuceli mod. 2 batteries 20 amp (25r or similar... All are either sony.,samsung or another recommend brand) and have no issue using at 80watts. The coil is not having issues tank is easier to filll(though my dumba** figured out that top slides by accident). I dont know the max that the battery can go to but if i believe with info i got here before with 2 batteries i should be good  

What's The Best Duel 18650 Batteries For 30-45 Watts Of Vaping?

Hi, so I have several different brands of 18650 batteries but I'm getting ready to pick up the new Geekvape Aegis X, I wanted to get some new batteries. I have been reading up on it but I'm so confused, I don't vape very high wattage It's always under 50 watt, 45 usually being the most, so what would be the best batteries for long activity? Any input would really help. Thanks  

I Am Stumped On This Kanger Subtank Rba Deck Problem...

So I finally got around to putting a coil on the rba deck...my typical kayfun build, 28 ga @ 1.3-1.4 ohms. Everything looked good, coil tight....raised off the deck...screwed into the ohm meter....weirdness ensues....said 3.85 ohms...took it off, put it back on...said 4.6 ohms....looked to see if the coil screws were tight ...check. both tails tight under the screws...check. The coil deck screwed into the base...yep. No moisture in the base, nope. Put it on the ipv...said 7.7 ohms, then 4.2, then 3.90.............


Put the stock coils in the base, everything normal. Is there something I could be missing in the coil deck??? I got nothing else. No, I had not put the chimney on, so no short there. I may wrap another coil and see....I can only think that something is amiss in that little coil deck....or I am missing something in the build that is obvious. It's a really nice, tight looking coil too.