More Nic Delivery Nautty Mini Vs Kayfun

So I decided to try a 1,6 ohm coil on kayfun v4 clone Tobecco and I am using 28gauge Kanthal with a cotton
wick on a Rdna 30 and its vaping well at 15 watts I have a kanger subtank mini coming in the mail and here goes my question
So the kanger subtank states that with a .5 ohm coil i could vape up to 30 watts but the voltage comes in at like 3.8 volts
I was under the impression that the rdna 30 needs at least 4 volts to work which kinda brings me to my second question
What is the point of of sub ohms? cant i just build a 2.0 ohm coil or something like that to achieve the results as if i was subohming
I am very confused on this
thanks for the replys in advance
Oh yea is a 1.6 ohm coil at 15 watts a normal build or any recommendations for the kayfun v4 for watts and ohms thanks again  

Hello.
So I think i kind like a cooler vape been getting some heavy lung feeling lately been vaping a 1.2 ohm single coil 28 g kanthal
cotton wick on kayfun clone v4 Tobecco, i would like to try like maybe 1.8 or a 2.0 ohm coil or is the kayfun v4 really better for
lower ohm coils I keep reading where the kayfuns sweet spot is like 1.2 - 1.5 i did lower my wattage from 14 to 12 but i like to seem some clouds more of a flavor chaser than a cloud person though
so i am just wondering if anyone has tried a kayfun around 2.0 ohms and what the vape was like
thank you  

I'm at my wicks end with this whole rebuilding thing!

Having given up anologs with my Nautilus Mini, I thought I'd treat myself to an authentic Kayfun v4.

My first rebuildable. It vapes great, lots of dense smooth vapour, but the cotton tastes awful!!

Tried cheap cotton from the chemist. Tried Koh Gen Do. The best so far has been Klaud cotton, but there's no denying it. While the vapour is superior to my Nautilus the taste is no where near as good.

Everything in my Kv4 tastes of cotton with a hint of the juice flavour.

I've watched all the videos on you tube, it's wicking fine, but cotton just tastes bad!




7wraps, 3mm ID, 28g Kantal, 1.4 Ohms.

Promised myself a Vapor Flask DNA40 for the Kv4. But if I can't get it tasting better
then this the Kayfun can go in the bin, I'll stick with the Nautilus Mini's on iStick 20w's.  

Ive been having this Gold Kayfun v4 from FastTech since February . Obviously it is a clone . What I noticed since day one was that it was not heating up fast enough . It takes longer than all of my other attomoziers for the coil to light up when I am dry burning it and it produces the least amount of vapor . Ive taken the whole thing apart many times to see if I can find the problem but no sucess . Does anyone know what might be causing this ?  

Just as the title says..just bought a kayfun lite +/ Russian 91% clone, and the drip tip gets hot after a few hits..using mvp 2.0 that only goes to 11 w ( which is where I usually vape) with 1.7 coil/cotton wick..should I just look into another drip tip made of a different material? This is my first rta..my protank 2 tip never got hot even when chain vaping..the tank would warm up pretty good, but never the drip tip.  

Starting from a clean - authentic nautilus mini - with a brand new 1.6 (or 1.8 it makes no difference) coil (coils also verified as authentic).

1. Turn tank upside down - with tip removed and fill with juice.
2. Take base unit and set so no air holes are open.
3. Put a tiny bit of juice around the o ring of the base unit (i get the issues if I do this or not)
4. Put 2 small drops of juice into the coil (I get the issues if do this or not)
5. Screw the coil into the base unit (as tight as you can comfortably get it without going past the obvious stop point and damaging something)
6. Screw the coil/base unit into the tank.
7. Turn nautilus mini correct way up.
8. Move air hole to a middle setting.
9. Take some primer puffs with no power.
10. Leave standing for 5-10 mins.
11. Begin vaping gently at 6 watts - moving up slowly to 10.

Ive tried all types of juice - both high VG and high PG and in-between. Invariably at some point i start to get the gurgle. Ive tried the following fixes:

1. Using a paper towel blow gently out of the air hole to get rid of juice - doesn't work - if i kept on blowing id blow the whole tank of juice out.
2. Take the unit apart - most times there will be juice in the base unit underneath where the coil sits - dry this out - dry the coil off and repeat from step 2 above missing out steps 3 and 4. - this sometimes works but its a temporary fix.

There seems to be no pattern to the problem. Sometimes the gurgle starts as soon as ive changed the coil - sometimes its ok for a week. I have 2 units and 2 spare tanks and have rotated them all using the above method - still get the issues.

I have actually never experienced the burnt taste or reduced draw because Ive always got sick and binned the coil before that point.

I am vaping generally at 9.2 watts - but have tried as low as 7 and as high as 13 - it makes no difference.

I don't draw hard - I cannot understand why I keep getting juice in the air chamber - its not a problem with a "dud coil" unless they are all intermittently dud coils - they are all authentic aspire and I've bought them from different places - so its not a dodgy batch issue - the rings are all the correct way up - I have spent hours and hours researching to try to fix these issues - and cannot for the life of me maintain a stable nautilus mini.

Can anyone save me from madness and tell me what Im doing wrong - Im tending towards a conclusion of all nautilus mini components are junk at the moment.

Many thanks in advance  

Well I bought a mod and a kayfun and after about a week of fiddling and trying to get it to work its just way too much of a hassle so I am probably going to sell it to my friend that wanted a mod and kayfun anyway. Now I currently tried to upgrade from mini nautilus and vision spinner 2 to mod but I kind of want to downgrade even further since I went through 2 vision spinners and 2 mini nautlius in about a month and a half so obviously I am not happy. Im sure you all know why i hate the mini nautilus. But now i was thinking about going back to the Halo g6 starter kit that i got started with vaping. When i look back it was so hassle free, convenient, and i didnt attract attention like the bigger batteries etc which are usually frowned upon by people in the general public. I use 12mg so I was wondering to make up for the smaller battery and vapor that i should upgrade to 18mg? Yes I know im going to end up spending like another $100 for a starter kit and halo ejuice which is expensive since its $20 for 30ml and other ejuice doesnt seem to work in the g6 cartridges. I really need a 2nd opinion on what people think of this plan. The g6 should last me awhile unlike the vision and mini nautilus which id have to keep rebuying which is like $50 a month even though i buy off mtbakervapor which has much lower prices than halo even though its also prob lower quality. What do you guys think? Are mods just an addiction hobby thing that smokers actually need.  

So I'm a toodle puffer. My normal set-up is a Joyetech Evic Easy and a Kayfun lite with unflavored liquid. The Evic Easy has a regulated 3.3 volt mode and an unregulated mode. I run the Kayfun (original V1) at 1.5 ohms, so I'm vaping at a whopping 7 watts.

Just on a whim, since I was ordering some supplies and stuff, I decided to try one of those new-fangled subtank minis...hey, it was on sale. This is my result after 2 days.

First, the .5 ohm was out of the question, so I primed and put in the 1.2 ohm OCC coil. Well, this was just not a good fit for me. The problem is, I think, the wire guage. I bet the coil is made from 24-26 guage wire. My 3.3 volts took forever to heat that wire. I had to hold the button down for 3-5 seconds to get any sizzle at all, and just couldn't get much vapor.

So, the next step is to try the rba base. This is very kayfun-like, and I built it the same way. Inspecting it, I found a burr on one of the juice channels, but filed that off with a needle file. I built a 1.8 ohm 30ga 2mm coil that turned out to be 2.0 ohm...oh, well close enough. Wicked it with my typical cotton ball and laid the tails across the deck.

I looked at the mouthpiece. Are you kidding me, looks like a tailpipe. Swapped to a favorite drip tip, turned the airflow to the lowest setting, and started vaping.

I've gone thru 2 tanks, and it's working great. Maybe better than my kayfuns. I'm going to try rebuilding the OCC coils for backups, and will likely get a couple more rba bases. The beauty may be how easy it will be to swap out the coil.  

My Kayfun is around 10 months old and beat up. I was looking for replacement and wondering what else is out there that you recommend. I vape around 1.2Ohms and have been happy with my Kayfun. Just wanted to check with you all to see if there is something else I should try.

Tx  

I bought a Kayfun v4 I'm running around .5 ohm coil and a 70 vg 30 of juice but I'm not getting much flavor I've heard so many good things about this device what am I doing wrong. Please help.


Sent from my iPhone using Tapatalk