Mech Mod And Rba Doesnt Work?

Hello just recently bought a mutation x v2 and built a .9 ohm dual coil and threw it on my smoktech xpro m80 and it hits like a champ but as soon as i throw it on my stingray it doesnt fire up for some reason  


Similar Content



Mech Mod Help?

Hello very basic question I love dripping and do it all day my one problem is with the mech mods I have I cannot place them down with out locking them or they fire sometimes anyone know of a good clone that will not fire when placed down maybe one with a recessed button of sort?

I currently have a F U and a Stingray infinity  

Help! My Mech Mod Won't Work!

I have a hades 26650 mechanical mod and I was running a tobh atty v2 dual vertical coil build. It was working perfect but I was getting tired of dripping. I bought an aspire Atlantis, and it won't fire. I feel as though it's my mod, because I was fumbling with some adjustments on it, and it fired for about seconds. I was very happy with the production and flavor. But, now no matter what I adjust or anything, it won't fire anymore. I cleaned the connections and everything. Please help!  

Mech Mod Coil Build

Hi. I have just purchased the heavy hitter mech mod.
The coils I bought are wotofo .28 dual core fused claptons.
It is a asgard mini RDA, it will be a dual coil build , so resistance should be .14
Will a Samsung 40t battery be ok with this build.
In regards to saftey and amp draw.
Thanks  

Advice For Build

Hey forum folks. I got lucky enough to win beyond vape's monthly prize and chose the neptune V1 hybrid mech mod. It will be making its way to me soon but in the mean time I need to get all the various goodies to make use of it. I need some recommendations for battery, battery charger, and dual coil build for the 3post rda that is built into it as this is my first rda and mech mod.

Thanks in advance  

Be Aware And Careful.

Happened today. Smoktech xpro m80 plus bit the dust.

The "ghost fire mode got me" 510 is currently a direct power output, on or off it will constantly fire atomizer's.

I have reset the mod, turned it on and off. Only solution is to screw off my RDA.

I understand safety, ohms law. And make sure everything is operating properly. I have taken good care of it. Really no fault of my own to be honest.

Be careful, just if you own one watch it. If i would have had it in my pocket and it started firing and i had the radio playing and not heard it? Thats pretty serious IMO. Just figured I'd let you guys know.

Vape on vape SAFE!  

Do You Save Your Coil Builds?

Hey guys just recently got a Lemo2, wasn't happy with the coil that it came built with for some reason so built my first one to put in. I think it came out pretty good, I believe it came with 24g Kanthal and I did 11 wraps around 3.5mm came out to 0.9ohm. It takes a while to ramp up but seems to give a nicer vape to me than the stock one which was like 5 wraps around 2mm at 0.5 ohm.

Anyways, I tossed the original coil and now am wondering if I really had to or could have saved it. When you guys try new coil builds do you save your older builds? And being that it's really just resistance wire does a coil ever really need to be replaced or is it just for novelty/trying new builds?  

I Think I’m Ready For Mech Mods!

Hey Guys,

I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.

To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.

I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.

I still do have a few questions I was hoping an experienced Mech user could help me answer:

- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.

- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.

- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.

- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?

- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.

- Any other tips you could throw my way would be great!

Thanks in advance!  

My First Build

Just finished up my first build using 24 Guage kanthal with 9 wraps. It's a dual coil build that came out to .49 ohms. It's not the best looking build but for my first attempt I guess it's not too shabby. It was built on my mutation x v4. 40-45w was about as high as I could go before it got too hot for my liking. just wanted to share it.  

Favorite Rda/sub-ohm Build???

Hey guys. I have been in the vaping scene for a little while now. Just curious to what everyone likes to sub-ohm with.

My favorites so far.

Mutation X V3- 24 gauge dual parallel 5/6 wrap
Mutation X V4- 20 gauge dual 5/6 wrap or dual 6/7 wrap
Turbo RDA- both of the above builds work well

I've had the dark horse, doge and doge v2, freakshow, and a few other RDA's and the 3 above have been my favorite....v3 was my favorite for a while until I tried the v4, its now my favorite, and its a tie between the v3 and turbo for 2nd and 3rd place.  

510 Dctank

Is this ok to use with an MVP 20watt? It says to only use a manual battery. Also what resistance would you get for the MVP? Any help would be appreciated. I'm on a carto kick right now.

SMOKTech 510 Dual Coil Tank Combo