69 Clone 18650 + Kick Extension

Over the last 24 month or so, mods became bigger and bigger due to increasing sizes of batteries and comically large tank attys. Don't get me wrong, I appreciate the fact that I only need to change the battery and fill the tank once per day, that's awesome, however, some of those devices got to a point where they became not very portable anymore... Gone is the time in which the mod can be put in the pockets of your pants.
So, as far as I'm concerned, I got realy tired of those huge mods and went back to one of my first mods, no VV no VW no temperature control.... Its the REO mini..... Super small and tough as nails.
After a while I kept looking for something comparable but a non squonker mod. I found the Ministick with the 18650 extension.
I have it now for a few weeks and I'm sooooo happy with it.
It's just a tad larger than the REO mini but it carries the 18650 battery and the Kayfun V4. This mod would be quite a bit smaller than the REO mini if I take the battery extension off, which is very impressive.
I will very likely never buy another regular tube or box mod just due to its size.
I see only pros for side by sides, they are the perfect combination between small size and good battery/tank capacity, so I'm naturally wondering why they are so little loved?
What is your point of view?  

So i was thinking of starting a thread which might list every mod past and present which would be compiled by you from one day to the next. At first i thought it wouldn't be practical because no one would know if a mod had been added unless they read through the entire thread.

Then i thought if a list from A though Z were compiled systematically by members by copying and pasting the most recent list in this thread, and then contributing to it, ensuring your entries are inserted alphabetically (Even if it's only one or two mods), then eventually this thread could contain pretty much every mod that exists, and would be updated regularly, by you !. No pictures please !. Only brief descriptions such as "company name / name of mod / type of mod".

What better place for such a list than ECF, "The world's largest e-cigarette website.

Here's my contribution to start it off :


____________________________________________

Pioneer4you IPV 3 150 watt box mod (2 18650 batteries)

Pioneer4you IPV 4 100 watt box mod (2 18650 batteries)

Provape Provari V2.5 "Polished stainless steel" tube mod (1 18650 battery)

SIGELEI 100 watt Plus box mod (2 18650 batteries)

Smoant Charon TS 218 box mod (2 18650 batteries)

Tesla advanced vapourizer 6 volt -15 watt VV/VW Tube mod (single 18650 battery).

Vamo V7 40 watt tube mod (Single 18650 battery)

Voopoo Too 180 watt tc box mod (2 18650 batteries)

________________________________________


it's a list of all the mods i own at this present time.

If you're going to add to the list then you can add any mods you can think off as long as you place those mods into the existing alphabetical order ( description should start with the company name). Batteries such as, say, vision twist aren't mods so lets not get into those. Tube mods and box mods (Includes internal/built in battery mods) only please (Squonkers included)

And lets not forget Mechanicals.

If you think a previous desciption is incorrect then correct it.

Ensuring company names come first in your description will enable a logical, consistant "alphabetical" understanding of the list by anyone who views it.

If you don't know the name of the company who made the mod just insert the name of the mod etc.  

International Travelers

I am now in the US and I am going back to the Philippines for about a year.

I have a couple of VW box mods and a mech. tube mod along with 3 or 4 various atomizers. I also have a bunch of 18650 and 18500 batteries along with a couple of those skinny EGO style Twist batteries.

Since I make my own juice, I have some large bottles of VG and some 60mg Nic unflavored PG base, along with some bottles of flavorings.

I am thinking that everything I have goes into the checked bags except for the batteries which go in carry-on luggage ... does this sound right to you?


One thing else ... If I have a small EGO Twist battery with a small Kanger Aerotank Mini on top of it (for vaping at the airport once I get into Hong Kong), do you think I would have any problem with airport security if I put that in the TSA tray along with my other carry-on junk that's in my pocket before going though the metal detector? ... The Aerotank Mini in my pocket would have a little juice in it.

Thanks,  

Hi guys,
I would like to try more models of batteries, 18350 - 18500 - 18650.
Beyond AW, that I use usually, what other batteries can I try?
I use only mechanical mods, resistances from 0.8 to 1.5 ohm.
Thanks for the help!  

Hello ECF community,

I have recently ordered a kick from Ebay. It's not a kick 2, I think it's the original. It may even be a fake replica. Anywho's, I am having issues getting it to work. When i connect it in my mod, I'm not getting any electric current. It's as if it's not receiving any power from the battery, or not delivering power to the tank.

Any ideas? Thank you so much in advance!

Is it possible I need the Ohms to be in working range of the kick? I have no idea what the range would be, but my atty is at 1 Ohm.

 

Alright, it's been a while since I've been on ECF, so I figured since I've got a reason to post - I will. My 150w box mod shorted out my batteries, and the firing button and + button broke so now they're loose and disconnected. I figured since the warranty is still valid I'd exchange it or get my money back. But note I will NOT order from fasttech or anything that'll have me waiting a month for my purchase to get here. My budget is $70/usd, so I know my options are a bit slim. But here's my average vape set up: usually under 50 watts, but I'd prefer at least 60 watts+ on my device (I'd be willing to go with a 30 watt, but it'd have to be amazing for me to consider it). Coils on my RDA were usually under 1.0ohm (.2ohms-.8ohms) I HATE built in batteries so something I could use my 18650's in would be ideal (preferably dual 18650 but I'm willing to compromise), mechanical box mods sketch me out so I'd rather not get one of those. I don't care about the brand, as long as it's reliable, fits my budget and most of my preferences. Now that you have a base, lay it on me. What do you think would be a good new mod for me? I'm willing to compromise, but not by much. Thanks guys, I appreciate any suggestions.  

So I dug out 3 of my old Provari 2.5s with the extension caps ,I ordered 6 18650 button top batteries from 18650 batteries web site I have about 6 Berserkers a coupe of Geekvape Ammits and 3 2019 Kayfun minis tons of 28 gauge wire been building 1.5 ohm coils and wow it feels like 5 years ago lol , Anyway I just hope this whole thing with the FDA Pmtas just goes away if not I really hope a couple of my juice suppliers makes it thru I vape Heathers H vapes Dark Horse ,Black Note , Real tobacco Extracts ,Naturally Extracted Tobacco and rocket fuels reaper blend most all on a daily basis ,I do want to say this whole thing that's going on in this country is almost to the point of prejudice against people who vape I smoked for almost 35 years and finally quit in 2013 when I started with a Halo Triton and a Lavatube , I know I should be making my own juice just don't have the time ,and maybe buying a mech mod or 2 But I have about 10 VW/VV mods plus my 3 Provaris which are built like a tank ( I miss provape), well good luck to all  

Please explain what a kick is.I know it related to battery......I think.  

So I just bought a kit, it doesn't come with batteries -- which I wasn't told (was led to believe it was charged through the USB port according to vape store employee). So I ordered x4 Nitecore-NL1834 18650 3400mAh 3.7 Protected Lithium Ion (Li-ion) batteries and now the door won't close. I read an old article saying that Protected 18650 can be bigger. If there's a possibility of buying batteries that cost $18 a pop shouldn't they let you know there's a chance that it won't be the right size?
Is there a trick to getting the battery lid to close or do I need to now buy unprotected 18650 batteries and hopefully get my money back on the protected batteries I bought?  

Hey guyz,i am planning to buy a mtl setup and was wondering how to decide on good battery as i cant get a good explanation to the terms being used.i plan to vape around 15-25 watt and am looking for a 18650 battery that can last me well.i also saw people saying that sometimes its better to go for more amps than mah.So i was hoping someone can help me understamd as well as decide in some batteries