Kayfun Vs Orchid V4

Hello.
So I think i kind like a cooler vape been getting some heavy lung feeling lately been vaping a 1.2 ohm single coil 28 g kanthal
cotton wick on kayfun clone v4 Tobecco, i would like to try like maybe 1.8 or a 2.0 ohm coil or is the kayfun v4 really better for
lower ohm coils I keep reading where the kayfuns sweet spot is like 1.2 - 1.5 i did lower my wattage from 14 to 12 but i like to seem some clouds more of a flavor chaser than a cloud person though
so i am just wondering if anyone has tried a kayfun around 2.0 ohms and what the vape was like
thank you  

So I've been using a Kayfun v4 and provari p3 using the hybrid connector and have never been able to get th ohms below 2 using .2mm guage kanthal bought from Vape escape one 2 mm coiling tool and about 6 wraps was initially happy with that but after reading the results other users are having they typically end up around 1.2 1.4 ohms using far more wraps then I have been using I tried to increase my coil diameter to 2.5 mm and the ohms exploded to 5 ohms making it unusable I have noticed that my spring in the Kayfun gets incredibly dirty and charred with what I can describe only as soot if anyone has any insights into what could be going on I would much appreciate it ive been enjoying my Kayfun but I'm still looking for that mind blowing Vape I keep reading about  

My buddy wanted me to show him how to wrap up some coils. Hes using a vamo v5 and he bought an orchid v3. He doesnt like harsh draws but rather a smooth, light, cool pull. So i decided to try that standard wire that comes in the orchid v3's package. Its that stock, hair thin wire that comes in the box with most of your typical RDA's RTA's, but i cant figure out the gauge dimension on it. Im trying to get him a whole roll of it so he can wrap his own. If you guys can help me out i would appreciate it. Thanks!  

Does anyone know where I can buy a 26650 Orchid V4? I prefer a US vendor just because of the overseas shipping prices.
Thanks in advance!  

I'm Just curious, has anyone asked themselves what is up with, and why they come up with, some of names of vaping products? A lot of them seem to have no association at all with the products or use they represent! Like RDAs,Tanks,Mods etc. With names like Lemo,Orchid, Kayfun, Ego, Silverplay, and many,many more.Who comes up with this stuff??? Anyway i've wondered this for sometime and wanted to know what you people thought.  

Hi all, just got home from work and my new Orchid V4 was here waiting on me.
Kinda excited ok, thing is I started building coils for it using 28g wire.
Here the problem, I cant seem to loosen up the four screws on the post.
Are these normal threads or reverse threads?
Cant install new coils till I can loosen up those freaking screws lol.

Thanks, normally I never have such problems.

Jim  

To all the mouth to lung (Tootle Puffers) here ... There was a time when the famous "Kayfun Lite-Plus V2" was the gold standard when it came to single coil / higher ohm / low amp Tootle Puffing.

Now that this atomizer (to include all the Chinese clones of it) are so very hard to come by (to include spare parts), has anyone here replaced there old Kayfun Lites with the new "Kayfun Lite 2019" atomizer ?

I just ordered a couple of Chinese clones of the Kayfun Lite 2019 so I can make the big changeover.

Good bye to the sweet Kayfun Lite-Plus V2
Almost 6 years vaping on this
Rest in Peace ....

 

My Kayfun is around 10 months old and beat up. I was looking for replacement and wondering what else is out there that you recommend. I vape around 1.2Ohms and have been happy with my Kayfun. Just wanted to check with you all to see if there is something else I should try.

Tx  

Ok I'm hoping I don't get heat for these questions/statements but educating ones self especially with something that is still very new is important to me.

1. Read some articles on how there is second hand vape similar to cigarettes (99% better mind you) what are your thoughts? Vaping may not be as safe as smokers think, research suggests | Society | The Guardian

2. Formaldehyde found in builds running at high watts/voltage? But 0% at low/normal builds, what i can't seem to find is whats considered to high for a Mechanical Mod or even for a V/W, V/V Setup? My normal build for a mech mod is twisted single coil 24 gauge 6-7 wraps, usually gets about 0.28 ohms and single coil 8 wraps of 24 gauge puts out 0.73 ohms on my flavor builds.
Before You Vape: High levels of Formaldehyde Hidden in E-Cigs - NBC News  

It's my bedtime but I would like to leave a question with you.

Which of these two would you go for? This authentic Lemo or this Orchid clone? They both have good reviews but I would like to pick your brain about it... because I trust you more... so there!

I'm hoping to get some answers to read over my coffee tomorrow morning.

Thanks and goodnight from the sunny island.