Soon I Will...

So a juice im using is gunking up coils quick. I hate dry burning (it leaves a bad taste no matter how careful I am) and I've read you can re wick it with 1mm wick.

I heard ekowool is good, will that work? if so, what kind do I get hollow,cotton core or silica core?
And would I have to boil/clean the wick before I use it?

thx  

Hello, I've been using the Aerotank giant with an eVic Joyetech 1st gen battery since 5 months ago and the glass of my tank broke a few weeks ago so, I'm looking for a new tank upgrade, I've seen good reviews about the KangerTech Sub Ohm but I havn't had the time to see reviews about other thanks and this one looks pretty cool, what other tanks are out there to compete with this one? Should I get this one? I'm ordering in the next 3 hours or so, so, any advice is welcomed!

Thanks in advance vapers!  

I just felt like saying hello to everyone ! I hope your all having a fantastic day!! So my EVic Supreme took the biggest on me. I'm curious to know if anyone has tried the new iStick 50 watt ? What is your opinion on it? I'm also curious about the Herakles and the Atlantis sub ohm tanks. Anyone tried any of those as well ? Let me know what you guys think about em!  

Im about to do my first coil build and my shop was out of stock of resistance ohm checkers. I have an evic supreme though so can I use that device to check instead. or is that dangerous.  

So I was originaly going to buy an istick 50w with a kanger subtank buy I bought the Evic VT in racing yellow. It's on it's way in the mail. Was this a bad idea? Also should I just stick with the tank it comes with or should I buy a kanger subtank. My goal is big clouds and nice flavor!  

Hey everyone,
I've been vaping for about two years now, and have decided to start dripping. For the last few weeks, I have been dripping on an IGO-W, 26G Kanthal single coil (7 wrap micro coil reading at 0.8ohms) on my iStick 30w.

I just recently purchased a new battery that should arrive today, and was wondering if anyone had advice/tips on producing some fat clouds! Dual Coils? Different coil builds? Number of wraps? Watts to vape at? I think you get the picture lol.

The items I will be using are as follows:
-SMOK XPRO M80 Plus
-IGO-W
-26 Gauge Kanthal Wire
-Japanese Organic Cotton
- 80vg/20pg Juices

All input is greatly appreciated. Thanks!
-Tyler  

I am trying to get the best flavor with the best single coil build.

Objectives:
Flavor Smooth Vapor
Materials:
Kanthal Wire 35mg Nic Salts
I have noticed that either depending on the diameter of the coil or the spacing of the coil wraps You get a different kind of vape hit. It seems like higher gauge wire produces a smoother hit. And then couple that with a small diameter coil build, plus squishing the coil together to remove all coil spacing results in the smoothest possible vapor.

Can anyone confirm my findings? Or does anyone have any tips because I have still to replicate the smooth hit from clearomizer sub tank cartridge's that are non mesh. I am starting to think this is because the cotton is wrapped around the outside of the coil instead of being shoelace through the middle of the coil.  

Evic VT 60W by Joyetech PREORDER | Vape Street


eVic VT 60W PREORDER

ONLY $65 DURING PREORDER!!

Presenting the eVic-VT 60W, its new cutting edge technology of temperature control, embodying the concept of a healthy alternative lifestyle. eVic-VT features a super large OLED screen, supporting VT-Ti (Titanium)/ VT-Ni (Nickel)/ VW mode, and battery capacity of 5000mah.
The Variable Temperature (VT) brings out a different flavor experience with the change of temperature settings, not only improving the taste,but also saving battery and liquid consumption. eVic-VT is not your typical vape, it’s an evolutionary start.
Features:
Size: 47*25.5*85.6mm
Capacity: 5000mAh
Output mode: VT-Ti/VT-Ni/VW Mode
Temperature Range: 100-315℃/200-600˚F
Output Wattage: VT Mode:1W-60W
VW Mode:1W-50W
Output Voltage: 0.5V-8.0V
Resistance Range: 0.05-1.0ohm for VT mode
0.15-3.5ohm for VW mode
Color: Racing Yellow, Cool Black, Dazzling White
eVic-VT Visual Display:
VT-Ti mode/VT-Ni mode/VW
Wattages/ Voltages
Atomizer Resistance
Battery power/Puff/Time
ETA: Approximately mid June 2015  

Just a little warning to all who have purchased the Lemo 2- Do not use the wire included in the box.
I was a little worried when i was using the stock coil and noticed it had been turning a green color after a few days of use, not sure if this is the case with all Lemo 2's, but if you notice your wire is turning greenish, just throw it out and replace it. I don't believe this is kanthal, it could possibly be nichrome, but it's properties are not matching up with those of kanthal. My worries were confirmed when I decided to put a parallel 5 wrap coil on my rda with that wire because of my lack of other 24 gauge... Well today when I took out my cotton and dry burned the coil a little to rid it of excess juice, the coil actually deformed and somewhat melted on my rda . I don't know what kind of metal this is, but I'm positive it is not kanthal, this has never happened to me with kanthal, and this wire seems to be of a lower resistance than kanthal. Anyway, just wanted to let ya'll know to be careful with that wire, or just throw it out altogether. Otherwise, the Lemo 2 is a fantastic tank  

okay so don't laugh but this is really an amazing vaping experience/setup for me! I have two batteries and a dual 18650 charger, so I never have to charge onboard nor do I find myself with no power since I always have at least one charging. I love the simplicity of the cloupor mini 30w. Between the magnetic battery door, simplistic screen/button setup, and the overall minuscule appearance of it, I think she's beautiful! The arctic tank however, I've had a could problems, but not too bad (Yes, I did allow my atomizer head to soak for a full 24 hours in juice.) Before I get into that tanks problems though, I'd like to also include that I've been getting into dripping aswell. I bought a plume veil clone a while ago for around 30$, and i was dumb enough to think that there was no need for a VV mod over $15... therefore I bought an X6 battery (cringe, I know..) and long story short I had a terrible experience. the wire that came with the rda was iffy, and it also came with silica wick; which I hate. I ended up building some kinda ****ed up maelstrom of a build. I used the cotton ends of ear cleaners, the questionable wire that came with the atty, and I ran it all at a mind melting 4.4v. Best part of it is that I had no way to check how many ohms I was pushin out. Anyways, I digress. First problem with the Arctic sub ohm tank was the "Check atomizer" deal on my cloupor. The problem was that the connector pin for the mini 30w isn't spring loaded, so I had to whip out the mini screw driver and adjust it. Once that was fixed, the atty was working perfectly!! Except, I was getting a little burnt taste. That's when I've learned that with this tank you have to start at a low wattage and work up to 30 when you're starting vaping for that session. The airflow is good, but I hate airflow; so it's even more splendid that the lowest airflow setting is barely any air at all. Really. It feels like sucking through a brick, and I like it. A ton of flavor, I vape eucalyptus mint flavored juice right now, and I'm loving it. I can't even express to you guys how much I'm loving this thing! Thanks for the advice in telling me to get it!