I am regretting just buying the Ego One battery and not the whole kit because it is not making a good connection with the sub-tank nano. When the tank is screwed all the way down on it won't fire. I have the loosen it a little to find the sweet spot for it to fire. I have tried pushing the pin further out of the bottom of the tank and I used a deoxit gold and neither have helped. Any suggestions. Thanks.
I ordered a new version of the Vamo V7 varible voltage 40 Watt mod and I am wondering if the Kanger Subtank Nano with a 1.2 ohm coil would be a viable combination. I want to try this tank just for the better flavor possibility but since the Vamo V7 is only rated down to 0.8 Ohms, I figure that I would have to use the 1.2 Ohm coil that is supplied with the Nano. I'm not quite ready to start dripping at this point in my vaping experience but want to get close to it. Are there any other tanks that would work better with the Vamo V7 than the nano? Thanks in advance for the advice.
So i had mvp 20w, and the kanger subtank worked fine with 1.2ohm occ at 11-12w.
Just put it on the mvp 3.0 and does not fire. Does not detect ohm ( blinks like this "-.-")
what gives? I tried with kanger pro tank 1.8ohm coil and it works great.
After Many months of searching, I have settled on my main out and about Mod as an MVP 30W and a Kanger Sub Tank Mini. I still love my e-pipes & drippers at home, but it is really nice just to grab the MVP and go, no extra batteries, parts, juice bottles, etc.
I have been carrying my old MVP2 & a Nautilus as a backup, but the vape and flavor is very different then my main, it really doesn't work as a backup.
After doing a ton of research I have decided that I will be going with the Subtank nano, but I am at a loss for what mod to get.
My only must have is that it needs to output at least 20 watts and stay around $70 or under. I want something smaller then the MVP 30W which is the reason I have not just picked up on of those.
I would like on board charging but it is not a must have.
I am open to either a box or tub style.
i have looked at the iStick 30, but I am not sure the lip on it will look good with the nano.
Okay EFC, let me know your thoughts!
I'm about to buy a istick 50w and a subtank nano online, I also selected liquid with 18mg and 12mg of nicotine, is that too much for the subtank nano???
lovin' my Subtank mini on an I stick. So as an ego + BCC guy, naturally I would like to have an ego-sized battery to go with a ST nano as a backup/at-work kinda thing, problem is, egos can't go sub-ohm! Ego One is interesting and might fit, what do you guys think?
I'm finding a 1.3 ohm coil to be to low for me. On my Provari, between 2.9 and 3.5 volts are OK. I haven't used this tank on either of my other two variable wattage regs, but I'd think it to be in the 6 - 7 watt range. It's time to re-wick the other tank or quit typing and do it already. I think I'd go for the former, but then I'd have to think about that. The other tank's coil I wrapped to about 1.7 ohms. My mech and me would be ever so gladder if that tank was fully operational again.
I feel very comfortable with searching for different vape gear and choosing what I think would work best. I enjoy my gear and I know what type of things I like. My question is about what should I buy for a friend who is new to vaping, but a previous smoker?
I've narrowed it down to a few things.
Innokin MVP 20watt
Joyetech EGO One 1100mah
Joyetech Egrip
Kanger subtank nano would be the most versatile clearo
My objective to stay cost friendly and simple. If anyone could recommend anything similar or something I may have missed let me know. I'm trying to stay away from the istick and replaceable battery devices. I let the person a try a few of my setups and the one that appealed most to him was my freakshow mini single coil @0.7ohms on the SMPL clone, the battery voltage was around 3.9ish at the time. He is not looking to become a hobbyist and has no interest in blowing clouds.
I'm leaning toward the MVP20watt and the Kanger subtank nano the most right now, but feeling the MVP3 would be an even better choice for the device. Let me know if you have any suggestions, I will be buying soon.
Thanks.
I also want to mention this person does construction work and the device may be subject to some durability tests lol.
Been building my vape hardware collection lately and at at the point where I wouldn't mind another good subtank, but it must have an RBA with it. Gotta be able to rebuild it! hah
My current lineup includes a Subtank Mini on the XPro M80 Plus, a 30w iStick, Doge, Dark Horse (by FAR my favorite RDA I've had or tried), and a Hades Mech. All decent stuff but I'd like to have another tank for my collection. What's a good (and decently priced) tank to go with my Subtank? I'll say this, I've tried the Atlantis and didn't care for it so don't suggest that. Any other suggestions?
So ran into another problem with my itaste 134, it was working fine a few hours ago. I went to refill my tank and when I put it back on it wouldn't fire, I looked at it and noticed when ever I pressed the bottom the light would instantly turn on then stay lit for 5 second. But no vapor at all. It now does this with or without a tank on it. Any idea what this could be?
Howdy do
So, its pay day and its new tank time. what would you guys suggest?
Currently got a Kanger SubTank on an iStick 50w (LOVE IT)
but i want a new toy
any suggestions?