E-juice Surfing

I dont know maybe its just me but if i put say smurf cake extra flavor shot in my kanger giant or my gs air's and the same juice in my melo or nano its not even close the sub tanks have way more vapor but the other tanks have way more flavor. kind of feel like sub tanks are like call of duty ( not a good game but everyone recommends it)..  

So....been vaping for 6 years.

For the last couple years I was using a Reo with an RBA at .5 ohms and was going through about 12-15ml a day. A friend of mine let me try his sub ohm tank a few weeks ago and I was hooked! The flavor was better than my Reo/RBA setup and the vapor was OMG.

Anyways, I've since bought a couple of sub ohm tanks with an IPV2 Mini, then graduated to a Goliath RTA with an SX Mini M Class. Using the Goliath with a .44 ohm dual coil at 30 watts on the SXM and I'm going through anywhere from 25-35ml a day! This just seem excessive....

Can anyone recommend an RTA that would use less juice but still give me a lot of airflow and flavor? I'm not all about the vapor, although I do enjoy it.

I'm guessing that if you want lots of airflow (I'm a direct lung inhale kinda guy) and a warm, full vape you pretty much have to vape at higher wattages/lower ohms and therefore use excessive amounts of juice...just wondering if anyone else has had a similar experience and has successfully cut down their juice consumption.

FYI, I DIY my juice so cost is not really an issue...I'm a bit concerned that using this much juice every day just can't be good for you.  

Has your Juice Consumption increased much if your uesing a sub ohm tank RTA, RDA with high wattage device.
I bet Juice Vendors are loving this trend.
Please share you observations if you've noticed you are using more juice. Or less juice but I doubt that Also throw in how much you've cut your nic and how much.  

Morning everyone, Got some new juice 25/75 pg/vg. Using a Aspire ESP 30 box mod with an aspire nauitilus tank. I just burnt through 2mls of juice in an hour. not constant vaping and after clearing a clog. Any idea?  

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

My juice is an organic vanilla with all vg. No pg. Looking for advice on tanks/coils that don’t burn too hot. Right now I use the mt32 kanger coil 1.8 and its too hot. Batteries are ileaf. Thanks.  

Or maybe even a heretic, or a blasphemer?
I like mini tanks and small batteries. My favorite setups are mini protank version 1 clones with 650mah basic ego style batteries. Stainless steel finish, no funky colors or designs. Single bottom coil on the tanks, no air flow controls. Standard voltage batteries, no twisty things on the bottom, no usb passthrough, no digital displays, just a battery. I like the ego style because the protruding button is easier to find and helps keep them from rolling around. The lack of features I don't need means the batteries are small. I like small, sleek, simple.

I have a nice big fancy Smok vv/vw battery. If I cut my juice in half with VG I can blow some massive clouds without knocking myself out. I found this to be mildly amusing for a short period of time. I also found out that with my regular mix when I dialed around for the "sweet spot" I ended up at 3.7 volts...

The mini tanks don't hold a day's worth of juice, and the 650mah batteries don't last all day. So what? Tank gets low, twist it off and pop another on. Battery light flashes, same thing. I've got a battered old EGO case from my first starter kit, it holds four tanks and batteries and a bottle of juice with room to spare.

I got my first mini pro tank from a vape shop. I just assumed it was a Kanger, but there was no mention of Kangertech anywhere on the packaging or tank. Whatever, I really liked it. I figured the real deal would be even better so I ordered one online. Kanger had discontinued the version 1, so I bought the "new, improved" version 2. It was good, but I liked the clone version 1 better. The clone tanks are polycarbonate rather than pyrex, but I don't vape plastic eating flavors, so that's a non-issue.

Now I'm not knocking all the cloud chasing, coil winding, wick trimming gear heads that seem to dominate these forums, but if there's anybody else out there who enjoys vaping with a nice, simple, inexpensive setup, I'd like to hear from you.  

I always get juice from juice Mafia, my local brand..... well this time I got 100% vg no nic juice in Arctic Ice because I got my girl a new tank to use as an e-hooka. The strange thing is the juice is crystallizing both in the bottle and in the tank. It also is getting really cloudy, but if I leave it say in the sun warmed window of my car the crystals seem to melt back into juice. Anyone know what's going on with this??  

I only have this problem with one juice flavor. It has to be the juice. Same tank and setup as all my others. I have a fresh coil and tank, load it up, and in less than a day my coil is gunked up and turns my clear juice dark brown. Is this safe to vape? It's annoying having to finish it and rinse my coil. Usually I can just fill my tank/top it off without worrying about cleaning it all. Anyone else have this issue?  

Just curious how you guys go about vaping through your juice bottles. I buy 30 ml bottles usually. I have a few tanks and dedicate a specific bottle to each tank. I make myself finish off a bottle before I go onto my next juices. If I decide to put a half bottle away and try a new flavor, I'd have a bunch of half bottles laying around and it would annoy the hell out of me.
I have a couple 60 mils on the way though, so I suppose I wouldn't mind stashing those halfway through. I suppose it could be way different for people that drip though.